|
|
WALL PANEL IMITATION CEMENT ENCOFRADO
Ref: CLASSIC D960
|
|
|
|
|
|
Interior Panels
Cover walls and ceilings with stone-look-alike panels!
Surface Material:
The surface is a fine, grainy sand structure with one or more colours and with arbitrary structures. The surface is durable and the colours are stable over time.
Core Material:
The surface is coated onto a carrier core (like MDF-boards, metal cassetts, composites, ceramics, aluminium sheets, glass or foam). The combination depends on the specific use and the physics of the building (insulation etc.)
Mounting:
The mounting depends on the carrier core that is used. It ranges from adhesive bonding to mechanical fixture (nails or screws) to the simple insertion into grids of suspended ceilings.
Subconstruction:
Depeding on the carrier core and the material to be covered the panels can be installed with or without subconstruction. Metal systems or wood slats are used in most cases.
Formats:
The panels are produced to measure. The format is typically determined by the size of the carrier core. For ceilings we can produce cassettes that fit into the standard grid pattern of suspended ceilings.
Colours and Design:
All colours and designs in our current colour chart.
|
|
Obtain the natural effect of the stone grace our facings out of staff!
Pierre dries reference 7040
in panel of 100 X 72.5 cm
Composition: staff facing (plaster of armed moulding
glass fibers), fire performance A1 (standard NF IN 13815)
Thickness: 20 mm
Unit weight: 8,5 kg
- Implementation simple and fast:
O Joining of the 2 models of panels by alternation to the coating STAFF DECORATION
(bucket of 10 kg, ref. 0010). Consumption approximately 1 kg of coating per m ².
O Adjustment and cut with the saw hand saw.
- Completion:
O Facing reserved for the interior fitting
O Natural and mineral effect
O No apparent connection
O Loan to be painted: ready to receive all types of paint
after application of a first tack coat.
- Quality ratio/prices Excels
|
|
|
TOTALStone. Natural Inspiration, where nature and warmth are predominant. Soft textures for harmonic ambiences. We reproduce a wide range of brick and stone panels with resistant, lightweight and long-lasting materials, that aim to reach new ways of expression.
|
|
|
TOTALStone. Natural Inspiration, where nature and warmth are predominant. Soft textures for harmonic ambiences. We reproduce a wide range of brick and stone panels with resistant, lightweight and long-lasting materials, that aim to reach new ways of expression.
|
|
|
TOTALStone. Natural Inspiration, where nature and warmth are predominant. Soft textures for harmonic ambiences. We reproduce a wide range of brick and stone panels with resistant, lightweight and long-lasting materials, that aim to reach new ways of expression.
|
|
|
TOTALDesign. Our panelling system submits to the current market and lets you create amazing atmospheres that achieve the big challenges of imagination. Our designs offers the most updated style and solutions, creative concepts for the possible environments as well as the unthinkable ones.
|
|
|
TOTALStone. Natural Inspiration, where nature and warmth are predominant. Soft textures for harmonic ambiences. We reproduce a wide range of brick and stone panels with resistant, lightweight and long-lasting materials, that aim to reach new ways of expression.
|
|
|
TOTALStone. Natural Inspiration, where nature and warmth are predominant. Soft textures for harmonic ambiences. We reproduce a wide range of brick and stone panels with resistant, lightweight and long-lasting materials, that aim to reach new ways of expression.
|
|
|
TOTALStone. Natural Inspiration, where nature and warmth are predominant. Soft textures for harmonic ambiences. We reproduce a wide range of brick and stone panels with resistant, lightweight and long-lasting materials, that aim to reach new ways of expression.
|
|
|
|
|
|
Mod. Waves
This piece has a rectangular base which is crossed with 10 cm wide strips forming a sinuous pattern accross the covering producing a warm and original effect.
----------------------------------------------------------------------------------------------
Duralmond decorative surfacing, manufactured using moulding technology, offers a world of forms and textures revolutionising the previously limited field of flat and cold surfaces.
Our range of surfacing products is specially designed for application in commercial outlets and public areas as well as all types of interiors. Duralmond is particularly interesting for interior designers and architects as it represents the next generation of surfacing which does not require any complementary decor, transmits sensations and can offer striking design possibilities.
Volumes which transcend two dimensions and give a distinguishing touch to the space. The mural effect of these surfaces allow different areas to be created while some innovative and creative designers use Duralmond to create headboards, lamps, dressing rooms, tables, frames, ceilings, furniture, etc.
|
|
We are now offering a new range of perfect bamboo cane imitation for use in interior design and decoration. Our pieces are easy to use in permanent decoratíon projects requíring bamboo cañe as they do not twist or split over time. They are calibrated, have an even tone, are easy to work with and lend
themsleves to machine work. The range is make up of a whole-cane piece for the seperation of spaces and a half-cane piece for mounting on walls and ceilings. We hope you like it.
|
|
TOTALWood. We calue contrasts. Merging classic and modern elements weobtain daring and amazing effects.
We admire wood, we reproduce it without damaging or consuming it.
|
|
The contropareti of the Unika series they conjugate exclusive semplicità of installation and design, in order to realize refined coordinated coatings to the laminated pavements Skema Brio. The contropareti they come realized with the same concept of the pavement, embedding the several panels own with the same consequenzialità of the floating pavements.
For being able to fix such panellings to the support carrying, on the side female to strike of the panels, much detail comes realized a working that allows the insertion of a clip of fi ssaggio that in its turn goes to couple to profi a type Omega. Such system concurs to cover walls being able to take advantage of numerous the decorative ones, the several fi niture and the various formats of the line Brio, Brio Special, Brio Mirror and Show Time.
Contropareti the Unika is available also with support in ignifugo HDF.
|
|
EGGER Lacquered boards (available in thicknesses from 2.5 mm to 6 mm), enhanced with decorative water based lacquers enjoy a broad range of application possibilities from the furniture industry through to the automotive industry.
Depending on the specification, they can be lacquered on one or both sides. Further enhancements such as drill holes, punch holes and milled finishes, in addition to an extensive standard collection comprising of 80 trend decors, have all contributed to EGGER Lacquered becoming one of the most important design materials in the decorative sector.
New innovative technologies such as the “coloured” groove, an almost invisible folding groove, are opening new horizons for the furniture industry.
|
|
partion walls by tela-design serve as blinds as well as wall decoration. Easily to integrate, they are equipped with all required features such as
incumbustible, anti-bacterial etc. Each piece will be manufactured according to the project's requirements.
|
|
Modence
one side covered with topstiched leather
one side covered with old parchment, with a silver line.
Stainless steel and oak base.
Choice of colors and design
Any creation on request
|
|
Produced in standard thickness of 3 mm sole leather only, Aria can be used for covering walls, boiserie, bed headboards, ceilings, doors and furniture. The measures are all customisable and the wide choice of colours can highlight the features' furniture and interiors decoration. The characteristics of our product are distinguished by its long lasting design and its flexibility to the modern comfort concept.
The leather becomes a strong emotional value added to the today design, a perfect solution for creating warm atmosphere with a strong aesthetic impact to enrich every detail, every corner, every room of your house and your yacht.
|
|
|
The walls are enhanced by unique and exclusive designs. The customization allows different solutions, specially realized for your environments. The art of the vegetable tanning joints to the modern furnishing needs, for creating a new way of living the leather covering, enriched by warm colours and soft suggestions.
|
|
|
A novel exclusive product to have the walls, inspiring its own personality. It creates practical and decorativas possibilities.
|
|
Onda HDF is an engraved high density wood fiber board. Onda HDF is ready to be varnished or lacquered. Onda panels are in size 3000x1220x19 mm and the design has been studied to gurantee the continuity of the wave when 2 panels are joined both on the long and the short side. The design repetition size is 300x244 mm.
Onda HDF can be delivered already surfaced with various materials like ecoleather, acrylic or pvc. In this case the size will be 2400x1220x19 mm again with the design repetition size 300x244 mm.
|
|
|
Marotte' innovative approach is endowing wall panels a sculptural dimension. Carving can be done on panels made up of different materials, which are then ready to receive various finished (lacquers, soft, varnished, etc...) The choice depends on the esthetics and desired effect. Whether for use in large-scale projects or simply as decorative elements, the panels are manufactured to respond to all possible demands of the creative process
|
|
|
Marotte' innovative approach is endowing wall panels a sculptural dimension. Carving can be done on panels made up of different materials, which are then ready to receive various finished (lacquers, soft, varnished, etc...) The choice depends on the esthetics and desired effect. Whether for use in large-scale projects or simply as decorative elements, the panels are manufactured to respond to all possible demands of the creative process
|
|
B-matrixgroup proposes a different concept for interior coating made in MDF
The classic three-dimensional machining of the panels is now enriched by a PVC coating with multiple finishes and textures. Washable, glossy and metallic effects allow you to decorate in a creative and dynamic style and finesse any environment.
The ease of application and the content weight of the panels enable you to adjust to any situations.
Then arises the need to customize the product in size and finish allowing an elegant and original application as an insert of furniture, frames for mirrors and whatever concerns the sector of furniture for interior design.
The entire collection is supplied in a classic lacquered finishes, gloss and matt, in all colors RALL or simply by allowing the application of a primer paint on the spot.
|
|
|
|
|
|
The large collection of this line is ideal for covering walls whit high-impact effects.
Explosion of color, monochrome or compounds, metal finish or artistic expression make the environments unique and surreal.
A revolutionary product for the world of interior that gives professionals the new-style and futuristic design absolute freedom of expression.
The incredible artistic finish at 360 degrees offers the ability to play any kind of issues depending on a variety of creative and whimsical forms.
Lightness and strength give the product a very broad scope, would complement perfectly the furnishings of public spaces, clubs, hall, water development, and in all environments where elegance, creativity and inspiration are the future not the limit.
Finish Metallics in gold , bronze, silver permit the construction of oatings suitable for all needs and totally customizable.
All collections have the opportunity to be realized in matter version, thanks to the presence of areas decorated with a spatula, shiny or matte give the product uniqueness and elegance.
A layer of new concept, a true work of art that allows you to decorate with style and simplicity.
|
|
|
|