|
|
|
Panel rolled out of glass wool covered on a face of a veil polyester. The good cohesion of glass wool ISOVER, associated with the veil, reinforces the mechanical resistance of BY COMFORT. Once positioned between the metal frameworks, it fills space perfectly, in accordance with the DTU 25-41.
|
|
|
URSA Acoustic Roll is a lightweight, non-combustible, unfaced glass mineral wool product used for sound insulation of lightweight metal stud partitions.
|
|
|
The OPTIMA® system of fiber glass blow-in insulation is designed for installation in sidewalls, cathedral ceilings, floored attics and other closed cavity applications. It is pneumatically installed behind non-woven OPTIMA fabric (or equivalent).
|
|
|
The OPTIMA® system of fiber glass blow-in insulation is designed for installation in sidewalls, cathedral ceilings, floored attics and other closed cavity applications. It is pneumatically installed behind non-woven OPTIMA fabric (or equivalent).
|
|
|
This product is used as a thermal or acoustical insulation in commercial buildings where wide rolls of unfaced insulation are required such as retrofitting a warehouse. It is also used in post frame construction. In roofs and sidewalls this product can be used as a second layer over the unfaced side of Metal Building Insulation 202-96. Additionally, it may be installed over old roof decks (BUR and metal) prior to application of a new standing seam roof.
|
|
Improve the comfort in adjacent rooms - add insulation to the basement. It’s easy & cost effective. For use in semi-finished or unfinished residential and commercial basement areas.
Basement wall insulation comes in two facings—white PSK and standard FSK—and is designed for use in both residential and commercial applications where code or builder preference specifies an insulated basement area. Both facings are perforated. Both products comply with ASTM C 665, Type II, Class A.
This product is intended for use in applications where the insulation will be left exposed. It can be applied either half-wall or full-wall. (Half-wall is not recommended for hollow block walls; they should be insulated full height.)
|
|
|
InsulSafe® SP Fiber Glass Blowing Insulation is used in residential and commercial construction as a thermal and acoustical insulation. It is designed for pneumatic installation in open attic areas and for retrofitting enclosed sidewall and floor/ceiling construction assemblies.
|
|
Fibreglass felt treated with thermosetting resins, covered on one side with kraft paper (ISOVER ROLLO K felt). Available also without sheathing (ISOVER ROLLO felt).
The Isover Rollo CE felts, wound with shrink-wrapped polythene, are available loose or palletised overcompressed.
The overcompression allows to transport a greater number of rolls at the same loading volume of the vehicle and a lower storage overall dimension with a clear cost saving.
The availability of loose rolls completing the load allows to deliver an exact quantity of square meters on the yard.
Guaranteed thermal performances.
Utilisation: thermal and acoustic insulation of industrial coverings.
Packaging: reels wrapped in heat-shrink polyethylene - bulk or on pallets.
|
|
|
|
|
|
Knauf Insulation glass wool (also known as glass mineral wool or fiber glass) is branded as Crown® and Thermolan® and finds its way into thousands of residential and commercial buildings as well as into OEM applications.
Knauf Insulation glass wool insulation solutions protect you from cold, heat, noise and fire, providing you with:
Thermal insulation: energy efficiency in buildings is a key point to choose your insulation material. The heat conductivity is measured by the y factor where a lower value means a better thermal insulation. Knauf Insulation glass wool is limiting the heat transfers that happen via conduction.
Acoustic insulation: thermal insulation is one of the components that have an impact on the comfort of your building. But your bulding must also grant you with a relaxing and quiet atmosphere. The higher the acoustic absorption, the better the acoustic insulation. Knauf Insulation glass wool is well suited for sound absorption and particularly for high sound frequencies.
Fire protection: safeguarding your lives and property from fire and its effects, increasing your safety at home and at work.
Easy installation: lightweight and superior roll length. Thanks to its high level of compression and lightweight, glass wool makes it easy to transport and lift to the roof. Its superior roll length also makes the installation very easy.
Knauf Insulation is committed to offering you products which give you this protection everyday, increasing comfort and safety.
Knauf Insulation... protecting your world!
|
|
URSA 10 DIVERSO Loft Roll is a lightweight, non-combustible, unfaced glass mineral wool product. It has perforations enabling the width to be split to either 2x580mm or 3x386mm.
URSA 10 DIVERSO Loft Roll offers the flexibility of being used either unsplit or between joists (either at 400mm centres or 600mm centres). All URSA 10 loft insulation products achieve the highest fire classification A1.
|
|
Glass wool of white color in flakes for mechanical blowing in the difficult lost roofs of access.
Thermo isolation and acoustics by blowing:
- on the floor of the lost, non made-up and difficult to reach roofs,
- on supports tight with the air,
- with the top of buildings of weak or average hygroscopy,
- in the residential and not-residential buildings,
- in nine as in restoration,
- using a blowing machine (with carding brushes or fan).
- Solution making it possible to fulfill the requirements regulations thermics, acoustics and of security sets fire to.
- Technique of insulation being appropriate for the ventilated roofings aimed by the DTU of series 40.
|
|
|
|
|
|
Product containing mineral wool applicable by projection and intended for the protector sets fire to, with the acoustic correction, even with the heat insulation.
The application of ISOFLAM makes it possible to realize by direct projection on the support to protect a protector against the fire, or an acoustic correction.
According to the nature of the element to be covered, it will be proceeded to the creation of a bridge of fixing with our primary education of adherence ISOFIX or to the installation of a mesh wire.
The components of ISOFLAM also utter excellent properties of thermo isolation to him.
Its adhesive qualities and its flexibility authorize the use of ISOFLAM without risk of cracking, nor of dilation on all plane or curved architectural forms.
This monolithic application (absence of joints) presents a uniform rustic completion without losses of performances.
ISOFLAM combines high level performances with economic characteristics by offering a quality ratio/reasonable price, while ensuring the setting in conformity of the buildings in order to answer the standards and rules of construction.
|
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance.
|
|
Rigid, fire safe stone wool slab with high thermal insulation perfomance. It is faced with a natural coloured glass tissue.
|
|
Semi-rigid, fire safe stone wool slab with high thermal insulation performance.
|
|
Rigid, fire safe stone wool board. It is faced with a natural coloured glass tissue.
|
|
Produced description
Rigid panel in rock wool to double density, resistant to jam, calpestabile, not covered for the thermal insulation and acoustic.
Applications
Isolation to the upper wing surface of slanted and flat roofings (warm roof).
Slanted roofings: particularly indicated in the event of roofs in wood and ventilated where it brings a meaningful increment of the acoustic performances.
Flat roofings: it is recommended for applications in which the impermeabilizzazione it is realized with liners or bituminous girdles.
|
|
Produced description
Rigid panel in rock wool to high density, resistant to jam, calpestabile, not covered for the thermal insulation and acoustic.
Applications
Isolation to the upper wing surface of roofings flat (warm roof) and tilted.
Flat roofings: it is recommended for applications in which the impermeabilizzazione it is realized with liners or bituminous girdles also in case of absence of mechanical implantations (incollaggio).
Slanted roofings: particularly indicated in the event of roofs in wood and ventilated where it brings a meaningful increment of the acoustic performances.
|
|
|
With a pressure resistant, self-supporting and form-stable structure Conlit® Steelprotect board defies the fire.
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance and load bearing capacity.
|
|
|
Rigid, fire safe stone wool slab with high thermal insulation performance and load bearing capacity.
|
|
Very rigid, fire safe stone wool board with high thermal insulation performance and load bearing capacity.
|
|
|
Self-supporting rigid glass wool panel covered d%u2019un kraft paper corrugated aluminum reinforced by a veil of glass.
|
|
|
|
|
|
The REPI SOUND panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building
The REPI SOUND panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI SOUND panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation may vary from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
PERFORMANCE AND TECHNICAL ASPECTS
The REPI SOUND panels belong to the category of fire-proof products and soundproofing and soundabsorbent products. The REPI SOUND panel obtains the soundabsorbent power thanks to its typical Perforated Sheet exposed to noise. Acoustic tests have attributed to the REPI SOUND panels values of RW equal to 32dB, 33dB, 35dB, which face the problems concerning noise reduction. In order to increase the soundproofing power, it is possible to produce a monolithic panel supplied with triple sheet, that is to say with a thin metallic sheet between two insulating layers.
|
|
|
Mineral Fibre insulation has a special pre-coating, allowing for faster application and also has a proven sound reduction of up to 3 dB.
|
|
|
|
|
|
The REPI SOUND panels are metallic panels with insulation made of mineral wool fit for the realisation of Roofs Coverings, Walls, Internal Division of industrial and civil building
The REPI SOUND panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports.
METAL SUPPORT:
The REPI SOUND panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Stainless Steel
- Natural Aluminium
- Prepainted Aluminium
- Copper
INSULATION:
The insulation is made of oriented fibre mineral wool which is arranged in fillets perpendicularly to the two metallic supports. The thickness of the insulation may vary from a minimum of 40 mm to a maximum of 300 mm with a density from 75 to 150 kg/cu.m.
PERFORMANCE AND TECHNICAL ASPECTS
The REPI SOUND panels belong to the category of fire-proof products and soundproofing and soundabsorbent products. The REPI SOUND panel obtains the soundabsorbent power thanks to its typical Perforated Sheet exposed to noise. Acoustic tests have attributed to the REPI SOUND panels values of RW equal to 32dB, 33dB, 35dB, which face the problems concerning noise reduction. In order to increase the soundproofing power, it is possible to produce a monolithic panel supplied with triple sheet, that is to say with a thin metallic sheet between two insulating layers.
|
|
|
Knauf Rigid Plenum Liner is a heavy-density fiber glass board insulation made from inorganic glass fibers bonded by a thermosetting resin. Its base board is amber with a black top layer of fiber glass. A black polymer overspray is applied to the airstream side for a smooth, tough finish.
|
|
|
Roof is the most exposed element of a facility. It should defy changeable weather conditions, assure water-resistance, and offer protection against cold in wintertime. Simultaneously it shall prevent overheating of the attic rooms in summer time and assure low level of transmission thermal losses in time of winter heating of attic rooms.
|
|
|
Rigid rockwool panel of strong mechanical resistance. Domisol formwork is intended for the insulation of the first floors of or tertiary sector residential buildings in bottom of formwork. It is compatible with the carparks and the establishments receiving of the public (erp).
|
|
|
|
Mineral wool insulation (rock, glass...)
