|
|
The main areas of application for Thermofloc cellulose insulation are roof insulation (full rafter insulation without rear ventilation), and the insulation of walls and ceilings. One important area of application is the insulation of old buildings which lack adequate thermal protection.
Roof insulation: Thermofloc Blow-in Insulation is installed in the existing construction - without any need to cover the roof afresh. Thanks to the technique used, this procedure saves considerable costs.
|
|
|
UltraTouch Nature Blend Cellulose is the perfect loose-fill insulating product for attic applications, where many homeowners place their highest performing insulation. UltraTouch Nature Blend Cellulose is an easy and effective option for increasing your ceiling insulation's performance by adding onto existing installations or giving your attic an update by replacing older, less effective products. When choosing to use UltraTouch Nature Blend Cellulose, you can be sure that you are not only increasing the energy efficiency of your home but you are also making the sustainable product choice. UltraTouch Nature Blend Cellulose is comprised of post-consumer recycled paper and treated with a borate solution, ensuring not only high performance but health and safety in your insulation choice!
|
|
Unlike the Blow-in Insulation, Thermofloc Floor Filling is processed by hand and used exclusively as a non-pressure-resistant insulation at the horizontal level (ceiling on the top storey, between joists in a wood-joist floor construction).
In order to ensure better manual processing, the insulation material is less compressed in the packaging. Thermofloc Floor Filling is available in 12 kg sacks, with 24 sacks per pallet. The insulation material is simply poured on evenly to achieve the desired insulation thickness and then spread to form a level surface. Material consumption is approx. 35 kg/m³.
|
|
SonaSpray "fc" is a spray applied acoustical texture designed for a wide range of project types. SonaSpray "fc" provides an attractive, high performance solution to acoustical and lighting design objectives in both new construction and renovation projects. Typical installations include: schools, churches, passenger terminals, libraries, cafeterias, offices, hotels and condominiums.
SonaSpray "fc" is available in White and Artic White. Specially matched colors are also available as a design option.
|
|
|
Proven in-place performance on interior structural steel makes it the most widely used fireproofing in the world. MK-6® is a low cost, gypsum based cementitious spray-applied fireproofing designed for easy, fast application to steel and concrete substrates. Available in two different formulations, Monokote affords greater flexibility for both small and large projects.
|
|
|
Whether your facility has been around for years or is currently under construction, protecting your fibrous insulation and fireproofing with Protek-13® is a spray-applied, water based vinyl acrylic emulsion containing interlacing/bridging fibers forming a protective white coating over fibrous surfaces.
|
|
|
Ure-K is a thermal barrier approved as a building interior insulation to delay the ignition and reduce the surface burning rate of low melting, combustible rigid spray-on polyurethane foam. Ure-K may be sprayed over foam in existing buildings or it can be used as a protective coating over foam in new construction projects as a combination system.
|
|
Celbar is a blend of specially prepared cellulose fibers, organic in nature, treated with adhesive and fire resistant chemicals. When sprayed in place, the interlocking fibers result in a mass that produces excellent sound and thermal properties.
Celbar is pneumatically spray-applied in wall and floor/ceiling cavities to form a monolithic coating. This process seals cracks and holes in the wallboard, around plumbing and electrical outlets, vent ducts and other irregularities. There are no compressed areas or voids to allow sound leaks, R-value reduction, or air infiltration.
|
|
|
K-13 is the spray-applied insulation tailored to your specific project requirements for insulation (R value), noise reduction (NRC), color, durability, condensation control, texture, and aesthetics. In addition, it usually provides these features at lower installed prices than many common systems such as rigid board and batt insulations, sprayed plasters, and acoustical ceilings. It is applied to virtually any properly prepared surface configuration of wood, steel, concrete, glass and other common construction surfaces. K-13 can be sprayed up to five inches thick overhead in one application without mechanical support. Additionally, K-13 serves as the exposed finish requiring no additional materials.
|
|
UltraTouch Natural Cotton Fiber insulation is the successful combination of 35 years of insulation experience and a revolutionary patented manufacturing process that has created a superior and safe product.
UltraTouch is made from high quality natural fibers. These fibers contain inherent qualities that provide for extremely effective sound absorption and maximum thermal performance. UltraTouch DOES NOT ITCH and is very easy to handle and work with.
UltraTouch contains no chemical irritants and requires no warning labels compared to other traditional products. There are no VOC concerns when using UltraTouch, as it is safe for you and the environment.
|
|
Natural insulating panel, made from Kenaf fibres, directly coming from cultivation, and hemp, interlaced and three-dimensionally thermally fixed, to whom is fixed a minimum part of polyester fibres as reinforce. Available as handy felt rolls with various thicknesses from 30 Kg/mc and as panels with higher density, up to 80 Kg/mc. Without polluting additives. Easy to use again, so completely recyclable when dismantled.
ADVANTAGES
%u2022 Insulation against cold and warmth
%u2022 Allows air flow
%u2022 Sound-proofing
%u2022 Sound- absorbing
%u2022 Resistant
%u2022 No need of moth-repellent treatment
%u2022 Natural and eco-friendly product
USES
FiberKenaf Pan solves all problems of thermal and acousticinsulation both on walls or as roofs insulation, and floating floorings or false ceilings. To replace mineral wool or polystyrene panels.
|
|
Hemp for stuffing applications is the no.1 moisture regulating gap filler!
Fields of application are the gaps between the beams and the walls as well as the hollow spaces next to windows and doors. Its use for skylights in the cover frame, in order to prevent damage caused by condense water, has also proved successful. Hemp for stuffing applications consists of mechanically processed hemp fibres which are impregnated with 3-5% soda.
|
|
Hemp Felts and Hemp Felt Stripes are made of needled hemp fibres which are impregnated with soda. They have a climate regulating effect, the improve the indoor climate and protect wooden surfaces from humidity differences.
Fields of Application: Hemp felts as underlay for parquet floor.
Hemp Felt Stripes as decoupling felts for wooden construction.
|
|
In France, the construction materials are the subject of a classification to fire.
This classification establishes a scale with six levels, since M0, fireproof, until M5, very easily flammable.
|
|
|
All RAL colours are available on request
|
|
Sandwich panel consisting of two layers (5 mm thickness each) in mineralised fir wood-wool bound with Portland cement, coupled to an internal layer of high density oriented mineral wool fibres.
- Acoustic insulation of walls
- Insulation of flat and sloping roofs
|
|
Covering of walls
Walls in double layers on metallic structures
Internal finish for ceilings and walls
Transpiring coverings, fire resistant with facing finish
|
|
Celenit N panel combined with a layer of gypsum board.
- Covering of walls
- Walls in double layers on metallic structures
- Internal finish for ceilings and walls
- Transpiring coverings, fire resistant with facing finish
|
|
Celenit GF, thermal and acoustic, ecobiocompatibile insulation panel, in wool of wood of fir, mineralized and tied with Portland concrete of not inferior compressive strength 42,5 to N/mm2, in compliance with the norm ONES EN 13168, coupled to a slab fibro concrete 5 thickness milimeter, produced from certifyd company ONES EN ISO 9001:2000.
Dimensions of the panel: cm 200x60
Spessori: milimeter 30 - 40 - 55
It employs: resistant inner and external coatings to the fire, the humidity and ices; resistant roofings to the fire with finish at sight.
|
|
Panel consisting of long mineralised fir wood-wool bound with Portland cement, reinforced with three fillets of stabilised wood.
- Transpiring coverings, resistance to fire with facing finish
- Support for gypsum board slabs and other coverings
- Support for wooden floors
|
|
Celenit N panel, smoothed on one face with plaster.
- Transpiring coverings, fire resistant with facing finish
- Loft insulation which can be walked on
- Fire resistant coverings
|
|
Particularly compact and strong panel consisting of long mineralised fir wood-wool bound with Portland cement, studied for use in permanent formwork to concrete.
- Permanent formwork to concrete.
|
|
Panel consisting of long mineralised fir wood-wool bound with Portland cement.
- Elimination of thermal bridges in pillars, beams, inter-storey facings, radiator niches
- Acoustic insulation of walls
- Insulation from floor noise
- Fire resistant coverings
- Insulation of flat and sloping roofs
- Permanent formwork to concrete
|
|
Lightweight fibreboards have been developed for use as vapour-permeable cladding for roof and wall components according to DIN 68 800-2. The 30 mm thick heat insulating board is ideal for the refurbishment of roof structures. The board improves the heat and sound insulation properties of such constructions
Characteristics
Moisture resistant, water repellent and corresponds to rebated sub-roofing
Contributes significantly to reducing heat bridges in the energy evaluation of constructions.
Classified according to EN 13171, heat insulating materials for buildings, wood fibre-based products.
Application
Timber framed buildings
Vapour-permeable wall cladding Extra heat insulation
Ventilated façade systems
Roofing/sub roofing
Sub roofing - rebated sub roofing components
2nd water-repellent layer
Heat insulation conversions
|
|
FunerMax Organic Fibre Billboard Special is a hydrophobic duplex panel with a specific surface coating for advertising billboards.
Standard design according to current stock range.
Details:
Volume weight: 1,000 kg/m³
Format:
2400 x 1,700 mm = 4.08 m²
Thickness: 8 mm
Palletising: 8 mm - 50 pieces
Special formats:
special thicknesses and/or cut to size on request.
|
|
|
|
|
|
Knauf Insulation is the world leading manufacturer of wood wool panels.
Knauf Insulation wood wool is branded as Heraklith®, Heradesign® and Fibralith®.
Thanks to hi-tech equipment and constant improvement of our insulation solutions, we are constantly improving the y and R values for a better thermal insulation. Our solutions also comply with the highest insulation and quality requirements with the ultrafine fibre of our wood wool panels.
Knauf Insulation wood wool insulation provide you with:
Fire protection: our Knauf Insulation wood wool insulation materials are the optimal choice of fire resistance for the security of your building.
Acoustic insulation: sound is the result of the vibration of particles in an elastic environment. The higher the sound absorption, the better the acoustic insulation. Sound absorption is playing an important role in the acoustic insulation of your building, particularly for specific applications such as public spaces (swimming pools, etc.) and recording studios, where our Knauf Insulation wood wool solutions are best suited for acoustic insulation with a high sound absorption.
A natural product: our wood wool insulation materials are made of natural fibres, protecting your environment.
Long life cycle: Knauf Insulation wood wool solutions comply with the current and future insulation requirements.
|
|
Rigid heat insulation made from natural wood fibres for application in roof and wall
Rigid insulation material made from natural wood fibres for floor systems
|
|
Sarking and sheathing board made of natural wood fibre for roof, wall, and floor constructions
Sheathing board for pitched roof
Insulated wall panel made from natural wood fibre
|
|
|
IKO Wood Fiber Roof Insulation Standard Coated is composed of interlocking cellulose fibers bonded together by heat, pressure and premium asphalt emulsion. It is manufactured in a convenient, labor-saving board size of 2'''' x 3.96'''' (0.61 m x 1.21 m). This product conforms to all requirements of CSA A247 and CAN/ULC-S706. It has been UL/ULC classified under file R-16377/CR2818, and Factory Mutual approved.
|
|
STEICOprotect has been specially developed for wood system building and is accurately matched to the insulating requirements in the dwelling structure. The wood fibre insulation board is produced in accordance with EN 13171 with ongoing quality supervision.
STEICOprotect can be directly planked onto both wooden truss structures as well as solid wood systems. A covering with render is given.
|
|
|
|
Natural fiber insulation
