|
|
Tight cell expanded polystyrene virgin pellet, specific for the dry blowing into hollows and confined volumes. The pellets have a constant grain size in curve (pellets diameter 3-6 mm) and controlled density, they are perfectly spherical, non-toxic, not absorbing, incorruptible, lastingly dimensionally stable, free of nourishing substances for bacteria and fungus.
Production totally free from the use of Chlorine Fluorine Carbides.
|
|
Fine grain
Ready-mixed thermo-insulating base, composed by very light inert material obtained from virgin expanded polystyrene pellets with a constant grain size (ø 2 mm.) and controlled density. Each single pellet has been treated during the production phase with the E.I.A. additive.
|
|
|
Highly effective thermal insulating ready-mixed plaster, composed by water binders and expanded virgin polystyrene pellets. It is a specific material for the realization of thermal insulation in hollows and on airy facing walls.
|
|
|
Ready-mixed and highly effective thermo-dehumidifying insulating plaster, composed by water binders, virgin expanded polystyrene pellets and special additives
|
|
|
|
|
|
sulation solution.
Incredibly fast to install and with no waste, it is just as suitable for new build as it is for improving the thermal performance of existing buildings.
Ecobead is a truly modern method of construction. In new build construction you can build both leaves of a cavity wall right up to the roofline, with no stopping and starting to install the insulant. The insulating bead can be injected at any subsequent stage, speeding construction programmes and reducing costs.
The EPS beads are injected into the wall with a specially designed adhesive and bond together forming a solid mass inside the cavity. The unique flow of bead coupled with its lightness enables the insulant to conform precisely to every fissure of the block and brickwork, producing a complete fill every time. The beads%u2019 spherical structure creates tiny air pockets in the insulant once the adhesive has dried.
Every bead has a single point of contact with each of the surrounding beads, allowing the cavity to breathe and any moisture penetrating the outer leaf to drain away immediately.
EcoBead is unaffected by flood water ingress where water is free from harmful contaminants. Please contact our technical department for further information.
Ecobead is available in original white EPS or as Platinum, to provide even higher insulation values.
Platinum EcoBead is an EPS bead which incorporates a graphite component called Neopor®, manufactured by BASF, to provide significantly improved thermal insulation performance, for example, to achieve higher levels of the Code for Sustainable Homes or just to improve SAP ratings.
|
|
|
For special projects or to fill rigid moulds, expanded polystyrene pearls can be used in bulk
|
|
Prefabricated thermal insulating board
Prefabricated thermal insulating board in EPS class 100 (various thicknesses) for external and internal thermal insulation.
Ecap board have a cement based smoothing mortar with a fibreglass mesh covered by the smoothing mortar and with prearranged overlaps, with punched holes for the insertion of the anchors.
After the application, it is only necessary to apply a finishing layer to obtain a perfect final result.
|
|
|
|
|
|
Knauf Insulation is also providing you with high performance insulation solutions in both extruded polystyrene (XPS) and expanded polystyrene (EPS).
EPS (Expanded polystyrene)
Knauf Insulation's expanded polystyrene is a rigid, lightweight thermoplastic, closed cell foam plastic. By controlling the density of the expanding beads during the manufacturing process, we produce custom made insulation to the specific requirements of all the building applications. Our EPS boards are made of a unique fire resistance quality and are available in a wide range of sizes and shapes for all insulation applications of new buildings and renovations.
Knauf Insulation EPS characteristics :
Low thermal conductivity
High permanent R-value
High compressive strength
Excellent shock absorption
Excellent dimensional stability
Inherently resistant to water
Reflective white color
Non-dusting
Will not rot, mildew or support bacterial growth
Resistant to most acids and alkalis
Knauf Insulation EPS benefits :
Low material/installation costs
Broad range of densities and sizes
Easy to handle and apply
Simple to cut and shape
Tolerates broad range of temperatures
Restricts moisture penetration
Does NOT deplete the Earth's ozone layer
Easy to recycle
|
|
|
SR.P %u2122 100 insulating panels are made of rigid and closed plastic cells which ensure optimal thermal performance and excellent water resistance.
|
|
|
SR.P %u2122 300 insulating panels are made of rigid and closed plastic cells which ensure an optimal thermal performance and excellent water resistance.
|
|
|
SR.P %u2122 200 insulating panels are made of rigid and closed plastic cells which ensure optimal thermal performance and excellent water resistance.
|
|
|
· UNIMAT%u2122 Façade 2FARA100 is an expanded polystyrene panel, 100 mm thickness, grooved face and alternate rabbets intended for the heat insulation by the outside of the systems under traditional hydraulic coatings.
|
|
Expanded polystyrene panel of strong density on right board. This PSE is of color silver plated gray.
Panel in PSE of strong density on right, gray board silver plated. EPSISOL gets busy for the insulation of the grounds of the apartment buildings, tertiary sectors and of the establishments receiving of the public. It is intended for the thermo isolation:
- under-face of the quay levels of houses,
- under cover of the floors located in top of basement, on underfloor space, external passage or quay level,
- floors (low or intermediaries) heating with warm water low temperature, reversible and radiant electric.
|
|
|
|
|
|
Springvale Floorshield has been providing the effective, efficient and cost-effective solution to insulating a wide variety of solid and suspended floor constructions for decades, making substantial contributions to energy efficiency.
An expanded polystyrene rigid insulation board, it is available in original white EPS or as Platinum, to provide even higher insulation values.
Platinum Floorshield is an EPS board which incorporates a graphite component called Neopor®, manufactured by BASF, to provide significantly improved thermal insulation performance, for example, to achieve higher levels of the Code for Sustainable Homes or just to improve SAP ratings.
Floorshield products are light and easy-to-handle and can be fitted simply in domestic, commercial and industrial ground floor applications. Floorshield is suitable for use in solid concrete floors above or below the ground bearing slab; above a suspended beam and block floor; within a suspended timber floor and below under floor heating systems.
The inherent insulation and compressive strength properties of this versatile material make it the most cost-effective loadbearing insulant for floor construction, with a compressive strength at 1% compression of 21 kPa. Springvale Floorshield products are the ideal solution for domestic applications.
Providing excellent thermal insulation properties, Floorshield and Platinum Floorshield reduce heat loss, conserve energy and can be used in conjunction with other products in Springvale%u2019s Shield range to assist compliance with the Code for Sustainable Homes.
|
|
UNIMAT%u2122 Sol Ultra 4FA62 is a panel of PSE-Graphite%u2122 Neopor® on board rabbets.
It is particularly intended for the insulation of the heating grounds (electric, with water circulation and reversible).
|
|
|
|
|
|
Beamshield Plus is the innovative, simple, fast and cost-effective way to create insulated suspended ground floors. Manufactured from high-strength EPS, Beamshield Plus units negate the need for concrete blocks, fitting snugly between and below concrete T beams to provide both the total floor insulation and a formwork on which to lay the structural screed.
Beamshield Plus is available in original white EPS and as Platinum Beamshield Plus, with higher insulation values. Platinum Beamshield is an EPS panel which incorporates a graphite component called Neopor®, manufactured by BASF, to provide significantly improved thermal insulation performance, for example, to achieve higher levels of the Code for Sustainable Homes or just to improve SAP ratings.
The insulation used to produce Platinum Beamshield Plus panels has a thermal resistance up to five times greater than lightweight thermal blocks, eliminating the need for additional insulation. The shape of the panels has been carefully developed to minimise thermal bridging at the T Beams; when installed, Springvale Beamshield Plus panels form an unbroken layer of insulation below the beams.
The system is simple and quick to install and produces a floor with an excellent thermal insulation value.
There are 2 insulation unit size options available: T60 with a shallow flange, suitable for use with 150mm beams, and T80 with a deep flange, for use with 175mm beams. Other beam sizes can also easily be catered for.
|
|
Concrete formwork insulating panels are made of rigid and closed plastic cells which ensure an optimal thermal performance and an excellent water resistance.
Placed in the formwork before the casting of the concrete, the panels ensure dryness, without unpleasant moulds and odors. The elimination of the airspace between the concrete and insulation prevents warm moist air from infiltrating, condensing and creating mould.
|
|
|
Insulating panels with integrated wood furrings are used to insulate walls and garage ceilings. For new construction or renovations these panels will make insulation and gypsum board installation easy. In fact, the wood furrings are placed every 16%u201D providing a surface for screwing and allowing for quicker installation.
|
|
TERMOSYSTEM ONDA® Waterproofing thermal insulator
A waterproofing insulation system suitable for the thermal insulation of corrugated industrial roofs and for asbestos-cement rehabilitation. The system is easy to install and offers the advantage of not having to dismantle the preexisting structure, as installation is carried out over the existing covering.
TERMOSYSTEM ONDA® is a composite system produced by coupling a waterproofing bituminous membrane and an EPS* insulating panel, shaped according to the type of fibro-cement or asbestos-cement corrugated covering it is going to be laid on; in case of vaulted roof it will be precut accordingly.
|
|
|
The Tectum E roof deck panel is a composite of a 1½” or thicker Tectum substrate, EPS (expanded polystyrene) insulation and 7/16“ OSB sheathing with a slip-resistant surface. Components are bonded with code-listed structural adhesives. The EPS core exceeds the requirements of ASTM C-578 Type I and bears the UL classification mark.
|
|
|
|
|
|
Low cost, highly efficient, Roofshield keeps the heat where it needs to be Springvale Roofshield has been providing the effective, efficient, cost-effective solution to insulating a wide variety %u2018flat%u2019 roof constructions for decades, making substantial contributions to energy efficiency. An expanded polystyrene rigid board, Roofshield is supplied pre-cut to ensure efficient rainwater run-off.
It is available as both laminated and non-laminated insulation boards to receive a variety of waterproofing layers such as built up felt, mastic asphalt or single ply membranes. Roofshield boards are supplied in a single layer to reduce installation time and can be used in a variety of domestic, commercial or industrial flat or tapered roof applications including concrete deck, metal deck or timber board substrates. The products are supplied in 3 grades, EPS 100, EPS 150 and EPS 200 to meet all compressive strength requirements.
Several board sizes can be supplied to reduce wastage, and any fall gradient can be achieved. The specification of cut-to-falls insulation is a complex task that calls for experience. Springvale%u2019s technical department has been providing and designing cut-to falls systems for many years and can ensure that your roofs will operate efficiently, however complex the design. All boards are supplied sequentially marked, to make installation a simple task. Roofshield is as friendly to the environment as it is to the installer. CFC and HCFC-free, it has an Ozone Depletion Potential of zero; a Global Warming Potential of zero, achieves a BRE Ecopoints ratingof 0.043, will last the life of the building and is totally recyclable at the end of the building%u2019s life.
|
|
|
Platinum Warmsark is a high duty thermal insulation panel with tightly interlocking tongue and groove joints on all edges developed specifically for use over the rafter plane in pitched roofs. The Warmsark layer completes the thermal envelope and combines with Warmsqueez to provide an exceptionally efficient thermal barrier with no cold bridging.
|
|
Roof insulating panels are made of rigid and closed plastic cells which ensure an optimal thermal performance and excellent water resistance.
Styro Rail offers the SR.P %u2122 100 (type 1) and SR.P %u2122 200 (type 2) as roof insulating panels. These different densities satisfy the varying requirements of builders, engineers and architects.
|
|
|
Quix starter system is available in both Polystyrene and Mineral Fibre and provides a quick and efficent method of starting the system.
|
|
|
|
|
|
Efficient, effective cavity wall insulation that fulfils all your thermal requirements Springvale Fulfil is a tightly interlocking cavity insulation panel individually moulded from lightweight closed cell EPS to provide a fast, efficient and cost-effective solution to insulating new masonry walls.
It is available in original white EPS or as Platinum, to provide even higher insulation values. Platinum Fulfil is an EPS board which incorporates a graphite component called Neopor®, manufactured by BASF to provide significantly improved thermal insulation performance, for example, to achieve higher levels of the Code for Sustainable Homes or just to improve SAP ratings.
Springvale Fulfil products are suitable for use in new buildings up to and including 12 metres in height. Fulfil boards are effective in achieving the required U-value of new external cavity walls with masonry inner and outer leaves.
The Springvale Fulfil concept was developed in conjunction with the Building Research Establishment and in consultation with NHBC. Fulfil boards are tongued and grooved on all four edges to provide tightly interlocking joints which prevent cold bridging and water penetration. On the external face, along the bottom edge of the board, a bellcast feature overlaps the top of the next board and protects the lateral joints by shedding water past the joint. A series of 5 or 10mm water %u2018run-off%u2019 angle fillets on the external face of the panel direct any water which has penetrated the external leaf of the wall down the face of the fulfil panels and back onto the outer masonry leaf.
|
|
A 50mm thickness of Alreflex Platinum can achieve a U-Value better than 0.35W/m2K in a 100mm cavity using any 100mm standard medium density block.
This detail will still meet the requirements of the new Part L 2006 based on current information.
Available in a range of thicknesses to meet the various building regulations requirements. (See U-Value solutions on back page.)
BBA Certificated Platinum board laminated to BBA Certificated Alreflex 1L-1 Super R Class O of which approximately 4 million sq.m. has been successfully installed in UK housing.
Special overlapping joints secured by wall tie clips creating a waterproof rain barrier to prevent ingress of water across the cavity.
Continuous overlapping system to aid air tightness of wall.
1200 x 450 boards installed as standard cavity wall boards but with laps secured on wall ties.
|
|
UNIMAT%u2122 Mur 2FA40 is expanded a polystyrene panel height of stage, thickness 40 mm, intended for the interior insulation of the walls, as well in new building as in restoration.
· It is used primarily as insulation between load-bearing wall and built against-partition-wall (gypsum blocks, bricks).
· It is available in 2 types:
- on right board,
- with alternate longitudinal rabbets (2FA).
|
|
|
|
|
|
SR.S %u2122 200 structural insulating panels are manufactured from expanded polystyrene and a conventional wood-framing system. Combining the knowledge of conventional wood-framing and the effectiveness of the expanded polystyrene, SR.S %u2122 200 is a pre-machined high performance insulation system offering an insulating factor of R25. It offers a continuous rigid outside insulation envelope, thus eliminating heat loss through wood components. To ensure the continuity of insulation between stories, the SR.S %u2122 200 system provides an expanded polystyrene strip which covers the entire header joist.
SR.S %u2122 200 structural insulating panels are offered in widths of 4' to 8' and are assembled easily on site with a few workers. They can be cut on the spot or lengthened with fillers.
To facilitate the installation of electricity and plumbing, an air space is included on the interior side of the system.
The wall rails and the wall plates are installed in accordance with the current practices of conventional wood-framing. The door lintels and the windows are also built in a traditional way. The system is accompanied by interior and external corners as well as interior and exterior angles of 45 degrees (for bay windows).
Wind-bracing is ensured by furrings, wind-bracing bars or plywood according to the chosen cladding.
|
|
Celenit E3, thermal and acoustic insulation panel, in compliance with the norm ONES EN 13168, composed from two layers (5 thickness milimeter everyone) in wool of wood of red fir, mineralized and tied with Portland concrete of not inferior compressive strength to 42,5 N/mm2, and from a expanded inner shell of polistirene extruded autoestinguente, in compliance with the norm ONES EN 13164, produced from certifyd company ONES EN ISO 9001:2000. The panel is classified of Euroclasse and reaction to the fire.
Dimensions of the panel: cm 200x60
Thickness of the panel: milimeter 25, 35, 50, 75, 100
It employs: elimination of thermal bridges in pillars, architraves, cordoli solai, niches radiators; cantinati, porticati coating insulation of; isolation of roofs over and under the beams.
|
|
|
|
Polystyrene insulation
