|
|
|
Panel rolled out of glass wool covered on a face of a veil polyester. The good cohesion of glass wool ISOVER, associated with the veil, reinforces the mechanical resistance of BY COMFORT. Once positioned between the metal frameworks, it fills space perfectly, in accordance with the DTU 25-41.
|
|
|
URSA Acoustic Roll is a lightweight, non-combustible, unfaced glass mineral wool product used for sound insulation of lightweight metal stud partitions.
|
|
UltraTouch Natural Cotton Fiber insulation is the successful combination of 35 years of insulation experience and a revolutionary patented manufacturing process that has created a superior and safe product.
UltraTouch is made from high quality natural fibers. These fibers contain inherent qualities that provide for extremely effective sound absorption and maximum thermal performance. UltraTouch DOES NOT ITCH and is very easy to handle and work with.
UltraTouch contains no chemical irritants and requires no warning labels compared to other traditional products. There are no VOC concerns when using UltraTouch, as it is safe for you and the environment.
|
|
|
ABRIFLOOR® is an extruded polyethylene foam, ideally suited for use as an underlay for laminated parquet thanks to its heat and noise insulation properties. This underlay in 20 and 25 kg/m³ density and thicknesses of 2 and 3 mm is supplied in convenient rolls of 1 m and 1,20 m and lengths of 10 m, 15 m, 20 m, 25 m or longer strips for professional use.
|
|
|
This product is used as a thermal or acoustical insulation in commercial buildings where wide rolls of unfaced insulation are required such as retrofitting a warehouse. It is also used in post frame construction. In roofs and sidewalls this product can be used as a second layer over the unfaced side of Metal Building Insulation 202-96. Additionally, it may be installed over old roof decks (BUR and metal) prior to application of a new standing seam roof.
|
|
Improve the comfort in adjacent rooms - add insulation to the basement. It’s easy & cost effective. For use in semi-finished or unfinished residential and commercial basement areas.
Basement wall insulation comes in two facings—white PSK and standard FSK—and is designed for use in both residential and commercial applications where code or builder preference specifies an insulated basement area. Both facings are perforated. Both products comply with ASTM C 665, Type II, Class A.
This product is intended for use in applications where the insulation will be left exposed. It can be applied either half-wall or full-wall. (Half-wall is not recommended for hollow block walls; they should be insulated full height.)
|
|
Fibreglass felt treated with thermosetting resins, covered on one side with kraft paper (ISOVER ROLLO K felt). Available also without sheathing (ISOVER ROLLO felt).
The Isover Rollo CE felts, wound with shrink-wrapped polythene, are available loose or palletised overcompressed.
The overcompression allows to transport a greater number of rolls at the same loading volume of the vehicle and a lower storage overall dimension with a clear cost saving.
The availability of loose rolls completing the load allows to deliver an exact quantity of square meters on the yard.
Guaranteed thermal performances.
Utilisation: thermal and acoustic insulation of industrial coverings.
Packaging: reels wrapped in heat-shrink polyethylene - bulk or on pallets.
|
|
|
|
|
|
Knauf Insulation glass wool (also known as glass mineral wool or fiber glass) is branded as Crown® and Thermolan® and finds its way into thousands of residential and commercial buildings as well as into OEM applications.
Knauf Insulation glass wool insulation solutions protect you from cold, heat, noise and fire, providing you with:
Thermal insulation: energy efficiency in buildings is a key point to choose your insulation material. The heat conductivity is measured by the y factor where a lower value means a better thermal insulation. Knauf Insulation glass wool is limiting the heat transfers that happen via conduction.
Acoustic insulation: thermal insulation is one of the components that have an impact on the comfort of your building. But your bulding must also grant you with a relaxing and quiet atmosphere. The higher the acoustic absorption, the better the acoustic insulation. Knauf Insulation glass wool is well suited for sound absorption and particularly for high sound frequencies.
Fire protection: safeguarding your lives and property from fire and its effects, increasing your safety at home and at work.
Easy installation: lightweight and superior roll length. Thanks to its high level of compression and lightweight, glass wool makes it easy to transport and lift to the roof. Its superior roll length also makes the installation very easy.
Knauf Insulation is committed to offering you products which give you this protection everyday, increasing comfort and safety.
Knauf Insulation... protecting your world!
|
|
URSA 10 DIVERSO Loft Roll is a lightweight, non-combustible, unfaced glass mineral wool product. It has perforations enabling the width to be split to either 2x580mm or 3x386mm.
URSA 10 DIVERSO Loft Roll offers the flexibility of being used either unsplit or between joists (either at 400mm centres or 600mm centres). All URSA 10 loft insulation products achieve the highest fire classification A1.
|
|
Natural insulating panel, made from Kenaf fibres, directly coming from cultivation, and hemp, interlaced and three-dimensionally thermally fixed, to whom is fixed a minimum part of polyester fibres as reinforce. Available as handy felt rolls with various thicknesses from 30 Kg/mc and as panels with higher density, up to 80 Kg/mc. Without polluting additives. Easy to use again, so completely recyclable when dismantled.
ADVANTAGES
%u2022 Insulation against cold and warmth
%u2022 Allows air flow
%u2022 Sound-proofing
%u2022 Sound- absorbing
%u2022 Resistant
%u2022 No need of moth-repellent treatment
%u2022 Natural and eco-friendly product
USES
FiberKenaf Pan solves all problems of thermal and acousticinsulation both on walls or as roofs insulation, and floating floorings or false ceilings. To replace mineral wool or polystyrene panels.
|
|
Hemp Felts and Hemp Felt Stripes are made of needled hemp fibres which are impregnated with soda. They have a climate regulating effect, the improve the indoor climate and protect wooden surfaces from humidity differences.
Fields of Application: Hemp felts as underlay for parquet floor.
Hemp Felt Stripes as decoupling felts for wooden construction.
|
|
In France, the construction materials are the subject of a classification to fire.
This classification establishes a scale with six levels, since M0, fireproof, until M5, very easily flammable.
|
|
CLIMAFLEX
Foam insulation with cells closed containing polyethylene. Applications: pipings in the medical sector heating/.
Easy installation
|
|
Preprufe® 300R & 160R membranes are unique composite sheets comprising a thick HDPE film, an aggressive pressure-sensitive adhesive and a weather resistant protective coating.
Unlike conventional non-adhering membranes, which are vulnerable to water ingress tracking between the unbonded membrane and structure, the unique Preprufe seal to concrete prevents any ingress or migration of water around the structure.
The Preprufe R System includes:
Preprufe 300R - heavy-duty grade for use below slabs and on rafts (i.e. mud slabs). Designed to accept the placing of heavy reinforcement using conventional concrete spacers.
Preprufe 160R - thinner grade for lighter applications and reverse tanking (i.e. blindside zero property line) applications against permanent formwork such as soil retention systems.
|
|
SPACE REFLEX also manufactures some of its products in rolls of small dimensions, destined essentially to the Bricolage Market.
These products are different in its presentation, keeping the same quality of material.
- They are extremely light and easy to apply and transport.
To know which the types of products came with these dimensions do not hesitate to contact us!
|
|
|
This range is conceived for lost or arranged roofs. It ensures a useful thermo isolation (utile=0.042 (W (mk)) technical opinion 20/04-39) and a natural hygrometrical regulation.
|
|
|
A range which allows total l%u2019isolation of the walls external and the partition-walls of distribution. Useful thermo isolation (utile=0.042 (W (mk)) - technical opinion 20/04-40), soundproofing (56 dB with 1000 Hz) and natural hygrometrical regulation. The panels of Batiplum wall are semi-rigid to facilitate the installation.
|
|
ISO Blanket and ISO Blanket Pro are limp-mass solutions designed for the treatment of airborne noise. They differ in their STC (Sound Transmission Coefficient) in that ISO Blanket Pro has a bigger coefficient/performance due to its agglomerated fabrics.
The blankets perform as sound barriers when applied to ceilings, walls and floors. Their flexibility, thin design and high resistance make them easy-to-use materials. They are most effective when used in construction projects that involve several layers of different material.
Product Technical Information
ISO Blanket Pro STC: 36,8 Rw (dB)
Dimensions: 1x5m (8mm thickness)
1900-2000 kg/m3
Applications
Worship Houses, Home Theatres, Listening Rooms, Recording and Broadcast Studios, Post Production Studios, Lecture Halls, Distance Learning Rooms, etc.
|
|
|
dBred VIBRO WS is specially designed homogeneous elastomeric support systems for gypsumboard partitions. The semi-cylindrical modulation at their base, increases the deflection and improves the vibration protection. The inclined flaps of dBred VIBRO WS cover the fixing bolts on the base and prevent contact with gypsumboard.
|
|
Impact sound insulation on parquet and laminate floorings up to 19 dB
Improvement of the acoustics on parquet and laminate floorings up to 15 dB
|
|
TERMOSYSTEM EPS G® Waterproof thermal insulator
Waterproof insulating system suitable for both civil and industrial coverings. The system versatility allows to obtain various solutions with easy laying procedures. It is produced by coupling a waterproof bituminous membrane, either self-protected or non self-protected, with a choice of reinforcements displaying cold flexibility characteristics, and various types of different thickness insulating material.
The TERMOSYSTEM EPS G® waterproof thermal insulator is a composite system made up of a bituminous membrane coupled with an insulating panel in sintered expanded polystyrene with added graphite, complying with EN 13163 standards and offering fire retardant properties (Euroclass%u201CE%u201D).
|
|
TERMOSYSTEM RC® Waterproof insulating system
Waterproof insulating system suitable for both civil and industrial coverings. The system versatility allows to obtain various solutions with easy laying procedures. It is produced by coupling a waterproof bituminous membrane, either self-protected or non self-protected, with a choice of reinforcements displaying cold flexibility characteristics, and various types of different thickness insulating materials.
The TERMOSYSTEM RC® waterproofing thermal insulator is a composite system made up of a bituminous membrane coupled with an insulating panel in oriented fiber mineral wool, complying with EN 13162 standards and non combustible (Euroclass %u201CE%u201D).
|
|
|
A non-woven reinforced polyester mat, impregnated and coated with APP modified bitumen to a nominal thickness of 4.0 mm (158 mils). Talc and a poly-film are applied to the top and bottom surfaces respectively. Classic can be applied as the base ply in a two-ply Armourplast System or as the top ply in a two-ply ballasted or exposed membrane system.
|
|
|
An inorganic reinforcing mat of durable, high-strength non-woven glass fibres, which is heavily coated and impregnated with SBS modified bitumen to a nominal thickness of 2.2 mm (87 mils). This sheet''s surface is covered with a thin poly-film which disappears upon torch welding of the cap sheet, while the underside is sanded to allow for mopping to heat-susceptible substrates.
|
|
| ... products without information |
| |
|
|
Roll insulation
