|
|
SonaSpray "fc" is a spray applied acoustical texture designed for a wide range of project types. SonaSpray "fc" provides an attractive, high performance solution to acoustical and lighting design objectives in both new construction and renovation projects. Typical installations include: schools, churches, passenger terminals, libraries, cafeterias, offices, hotels and condominiums.
SonaSpray "fc" is available in White and Artic White. Specially matched colors are also available as a design option.
|
|
|
Proven in-place performance on interior structural steel makes it the most widely used fireproofing in the world. MK-6® is a low cost, gypsum based cementitious spray-applied fireproofing designed for easy, fast application to steel and concrete substrates. Available in two different formulations, Monokote affords greater flexibility for both small and large projects.
|
|
|
Ure-K is a thermal barrier approved as a building interior insulation to delay the ignition and reduce the surface burning rate of low melting, combustible rigid spray-on polyurethane foam. Ure-K may be sprayed over foam in existing buildings or it can be used as a protective coating over foam in new construction projects as a combination system.
|
|
|
Whether your facility has been around for years or is currently under construction, protecting your fibrous insulation and fireproofing with Protek-13® is a spray-applied, water based vinyl acrylic emulsion containing interlacing/bridging fibers forming a protective white coating over fibrous surfaces.
|
|
|
K-13 is the spray-applied insulation tailored to your specific project requirements for insulation (R value), noise reduction (NRC), color, durability, condensation control, texture, and aesthetics. In addition, it usually provides these features at lower installed prices than many common systems such as rigid board and batt insulations, sprayed plasters, and acoustical ceilings. It is applied to virtually any properly prepared surface configuration of wood, steel, concrete, glass and other common construction surfaces. K-13 can be sprayed up to five inches thick overhead in one application without mechanical support. Additionally, K-13 serves as the exposed finish requiring no additional materials.
|
|
Celbar is a blend of specially prepared cellulose fibers, organic in nature, treated with adhesive and fire resistant chemicals. When sprayed in place, the interlocking fibers result in a mass that produces excellent sound and thermal properties.
Celbar is pneumatically spray-applied in wall and floor/ceiling cavities to form a monolithic coating. This process seals cracks and holes in the wallboard, around plumbing and electrical outlets, vent ducts and other irregularities. There are no compressed areas or voids to allow sound leaks, R-value reduction, or air infiltration.
|
|
Glass wool of white color in flakes for mechanical blowing in the difficult lost roofs of access.
Thermo isolation and acoustics by blowing:
- on the floor of the lost, non made-up and difficult to reach roofs,
- on supports tight with the air,
- with the top of buildings of weak or average hygroscopy,
- in the residential and not-residential buildings,
- in nine as in restoration,
- using a blowing machine (with carding brushes or fan).
- Solution making it possible to fulfill the requirements regulations thermics, acoustics and of security sets fire to.
- Technique of insulation being appropriate for the ventilated roofings aimed by the DTU of series 40.
|
|
|
|
|
|
Product containing mineral wool applicable by projection and intended for the protector sets fire to, with the acoustic correction, even with the heat insulation.
The application of ISOFLAM makes it possible to realize by direct projection on the support to protect a protector against the fire, or an acoustic correction.
According to the nature of the element to be covered, it will be proceeded to the creation of a bridge of fixing with our primary education of adherence ISOFIX or to the installation of a mesh wire.
The components of ISOFLAM also utter excellent properties of thermo isolation to him.
Its adhesive qualities and its flexibility authorize the use of ISOFLAM without risk of cracking, nor of dilation on all plane or curved architectural forms.
This monolithic application (absence of joints) presents a uniform rustic completion without losses of performances.
ISOFLAM combines high level performances with economic characteristics by offering a quality ratio/reasonable price, while ensuring the setting in conformity of the buildings in order to answer the standards and rules of construction.
|
|
|
|
|
|
Icynene®, the leading soft foam insulation and air barrier system, is becoming the industry standard for providing maximum building envelope performance. Icynene's pour and spray formulations represent a breakthrough in the science of moisture and thermal management.
Icynene® is the leading 100% water-blown foam insulation that minimizes air leakage for increased energy efficiency, creates a healthier indoor environment, reduces airborne sounds and offers greater design freedom. Icynene® maintains its performance with no loss of R-value over time. It does not shrink, sag or settle. Icynene® adheres to most construction materials and is the perfect insulation for walls, attics, ceilings and floors.
Spray Formula
Applied as a liquid, Icynene® expands to 100 times its volume in seconds to fill every crack and crevice while remaining flexible so that the integrity of the building envelope seal remains intact over time. Icynene's spray formula has an R-value of 3.6 per inch. It acts as a complete insulation and air barrier to minimize air leakage and seal the building envelope for optimal airtightness.
|
|
|
|
|
|
ICYNENE LD-R-50™ is Icynene’s next generation of high-performance insulation. ICYNENE LD-R-50™ is a renewable-based foam insulation and air barrier material that is responsibly made using castor oil and offers numerous environmental benefits.
Castor oil has been used in place of a portion of the petroleum-based polyol. ICYNENE LD-R-50™ exceeds the minimum renewable requirement for a bio-based material (testing in accordance with ASTM D 6866) and can contribute toward a building’s achievement of credits/points under various national green building standards, including LEED-H, LEED-NC, and the ICC 700-2008 National Green Building Standard.
Extracted from the castor plant, castor oil is a natural ingredient that is safe enough for use in personal care products such as lip balm. Production of the castor plant has low energy dependence and requires no pesticides, fungicides or man-made irrigation. The castor oil used for ICYNENE LD-R-50™ has a make-up which is extremely consistent year over year, from location to location and has a higher yield by weight (~40%) than soya oil (~17%).
Key benefits for homeowners, building professionals, architects:
|
|
|
Elastic, liquid-applied, one component polyurethane waterproofing membrane used for long lasting protection and waterproofing. It has excellent adhesion to almost all surfaces, provides crack-bridging, strong resistance to water and to the sun while it allows the surface to breath. It remains passable even in high temperatures, because it does not get soft by the sun. It remains elastic even at freezing temperatures. Tested and certified by the German state Laboratory MPA Braunschweig according the latest European Standard ETAG 005, for liquid-applied waterproofing coatings, the DIN 1948 for waterproofing and maintenance of its mechanical properties over a long time span through artificial accelerated aging.
|
|
CertaSpray closed cell foam insulation is the newest addition to the complete line of quality insulation Products from CertainTeed. As an all-in-one insulation air sealing system, CertaSpray foam insulation is designed to solve your extreme insulation requirements.
CertaSpray foam is appropriate for whole house applications or in combination with fiber glass, and is supported by the CertainTeed Building Science Professionals. These professionals experts in recommending the best performing thermal envelopes. Best of all, you get it all from an insulation leader you already know and trust - CertainTeed.
|
|
Spray-applied product based on mineral fibre intended for thermal insulation.
ISOTHERM is a product intended to provide thermal insulation by direct spray on a partition or support, with a prior application of our adhesive ISOFIX.
ISOTHERM can also be used for fire protection of concrete structures.
Its flexibility and adhesive properties allow ISOTHERM to be used without risk of cracking or shrinking, even on an uneven or different plane surfaces.
This process allows the setting of a seamless coating (no thermal or acoustic bridge) with a uniform finish without loss of performance.
ISOTHERM offers a perfect economical solution to thermal isolation problems due to its inherent fireproofing properties.
|
|
Spray-applied paste-type product based on vermiculite, intended for fire protection.
ROKISOL provides a thin coating for fire protection.
The application is a high density paste sprayed directly on the surface to be protected, providing a granular yet uniform aspect as well as excellent mechanical en shock resistant properties.
This allows the setting of a seamless, unbroken coating (no bridge) with a uniform finish without loss of performance.
ROKISOL combines high level performance with economical characteristics, yielding a good quality/cost ratio, while complying with fireproofing regulations for buildings in order to comply with the rules and standards of the building trade.
ROKISOL has been thoroughly tested by independent laboratories with excellent results.
|
|
|
|
Spray-applied insulation
