|
|
With the modular system wedi Moltoromo, versatile wall configurations can be created effectively for different bath and wellness applications. Round shapes, angled solutions or sinuous lines, as examples, can be installed quickly and easily.
Due to its modular design and selection of various system components,
nearly every customised wall combination can be created using wedi Moltoromo. Decoration with tile or stucco has barely any limits.
In addition to curved pieces with varying radii, the wall system also includes corner pieces, straight wall elements, end pieces, and connecting pieces.
Assembly is quick and easy, since all pieces can be combined with
each other using tongue and groove and can then be tiled or
stuccoed.
wedi Moltoromo is an absolutely innovative system which opens up new opportunities – from the classic dividing wall to the
unique shower – in every bathroom.
Quality from wedi guarantees quality of life in every bathroom.
|
|
|
|
|
|
New building board with factory-installed vapour barrier
wedi “BA Vapor” building board
The wedi “BA Vapor” building board with built-in vapour barrier is being introduced for all rooms subject to high vapour pressures and temperature differentials.
Already installed at the factory, the epoxy resin vapour barrier saves the craftsman valuable installation time, guarantees reliable sealing and makes it possible to apply high-quality wall covering rapidly. “BA Vapor” is suitable for all surfaces to be covered with ceramic tiles or plaster.
Especially in buildings with swimming pools, steam baths or communal showers, elevated air humidity is a permanent condition. Sound structural engineering principles require the addition of a vapour barrier when incorporating thermal insulation in such walls.
With the new “BA Vapor” building board, however, thermal insulation and the vapour barrier can be applied in a single step. wedi sealing tape is used to protect joint areas and openings against humidity and steam.
“BA Vapor” boards measure 2.50 x 0.60 metres and are available in thicknesses of 12.5 millimetres, 20 millimetres and 50 millimetres.
|
|
JACKOBOARD® Construction board consists of a closed-cell extruded polystyrene foam core and a protective coating made of special mortar and glass fibre. The construction elements are stable, heat-insulating and extremely durable. As they absorb no water, and tiling is possible directly on the surface coating, they are particularly suitable for kitchens and bathrooms.
* Construction element for interior work
* Special coating on both sides
* Tiling possible directly on the coating
* Perfect for wet rooms
|
|
Stamisol® SD 70 is particularly well-suited for insulation systems fixed on rafters, wainscotting, installation supports or panels.
High-strength vapor-barrier with FRIC® slippery surfacing Stamisol® SD 70 has been tested by the EMPA (No 407801) for its non-slippery properties. Provided that suitable shoes are worn, Stamisol® SD 70 is classified as safe (GS3) to very safe (GS4).
Characteristics of the material:
- Stamisol® SD 70 is a high quality polyethylene film
- non-slippery surface preventy accidents
|
|
Stamisol® ABS can be applied in all situations and can be installed behind wainscotting, stretched over rafters or fixed to a facade.
The vapor-barrier in most applications (exceptions: damp areas, recessed premises without de-humidifiers, indoor swimming-pools, saunas, etc.).
Composition of the material:
Stamisol® ABS is made of non-woven polypropylene with a special coating capable of regulating vapor flows. The new generation of Stamisol® ABS vapor-barrier guarantees a high degree of comfort. Completely air-tight and vapor resistant, the vapor-barrier offers balanced pressure regulation with a SD ratio of approximately 16 m, when installed per manufacturers specifications.
When used with an under-roofing membrane, Stamisol® ABS forms part of an excellent system for creating warm and healthy interior environnements.
|
|
The professionals know the "instructions for the realization of sealing per coating and coating on tile and paving in
interior and outside" * (edition of valid January 2005 as from January 2006). These craftsmen appreciate the strength to the moisture of the panels wedi. One often uses the panels of 50 mm for the shower screens. The 12,5 mm thickness is largely used in the place of
panels of plasterboard or second layer on panels of plasterboard.
|
|
Modern society is characterised by increased mobility and demand for new solutions for contemporary design. EGGER Lightweight boards is a brand new wood based panel that opens up a new dimension for furniture construction and interior fittings.
A modern wood board material low in weight, with increased stability which allows creative freedom in design is increasingly required. The aim to reduce the maximum weight possible without losses in load capacity and other technical aspects is only possible with a sandwich board.
|
|
| ... products without information |
| |
|
|
Various panels
