|
|
Specifications:
1)Paticle board(plain/melamine)
2) Dimensions: 1,220 x 2,440mm
3) Thickness: >12mm
4) Glue: E0, E1
5) We can produce according to customers' specifications
6) Widely used for different uses
|
|
The quality of Fantoni chipboard is due mainly to the exclusive use of particles of new wood, which are mixed with resins produced in the Fantoni factories and then hot-pressed.
A special process distributes large particles to the centre of the board and smaller particles on the surfaces: these give the panels an improved surface finish as well as increased performance characteristics. All products, and in particular "special" products, such as moisture-resistant chipboard, are continually subjected to performance tests.
|
|
Scope
Standard board for general use in dry conditions.
Description
Standard chipboard with unsanded, smooth and hard surface.
|
|
|
High-density board with sanded or unsanded surface, provided with a special oblique tongue profile on four sides. The tongue profile ensures high stability and easy installation and allows blind nailing or screwing of the panels.
|
|
|
Board for interior and furniture construction with sanded, fine surface and particularly screwable core, glued with melamine reinforced UF glue. The board undergoes minimal expansion and is suitable for applications in dry conditions. Naturspan 3 Star can be refined with paper, melamine, veneer or laminate. The board is easy to mill and has very low formaldehyde emission. According to Perforator EN 120, formaldehyde emission is maximum 3 mg/100 g dry board. According to JIS A 1460, formaldehyde emission is between 0.3 and 0.5 mg formaldehyde/litre (according to JIS A 1901, equivalent between 0.005 and 0.02 mg/m²h). The board is free of isocyanates and phenol glues.
|
|
|
High-density chipboard with sanded, fine surface and particularly screwable core, MUF glued. The board undergoes minimal expansion and swelling under high humidity conditions and is suitable for load-bearing applications in humid conditions. Naturspan HS can be refined with paper, melamine, veneer or laminate. The board is easy to mill and has low formaldehyde emission. Natural wood has values of < 2 mg/100 g dry substance; Naturspan HS achieves the same low emission levels. The board is free of isocyanates and phenol glues. Naturspan HS was awarded the first prize by the VBO in the category "ECO product". Naturspan HS is the new name for Naturspan-0.
|
|
|
Chipboard with sanded, fine surface and particularly screwable core. Suitable for industrial processing for interior decoration and furniture production, it can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Antivlam® withstands extreme heat and fire, does not contribute to flame spread and has a smoke development comparable to that of natural wood.
|
|
|
Highly fire retardant chipboard that complies with the most rigorous European standards. The board has a sanded, fine surface and a particularly screwable core. Suitable for industrial processing for interior decoration and furniture production, the board can be refined with, among others, paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Antivlam® Class 0 withstands extreme heat and fire, does not contribute to flame spread and has a smoke development comparable to that of natural wood.
|
|
|
High-density MDF with fine sanded surface, particularly screwable core and excellent fire retardant properties. Suitable for industrial processing for interior decoration products and furniture production. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Firax withstands extreme heat and fire and has several national and international test reports.
|
|
|
Low-density MDF with fine sanded surface, particularly screwable core and excellent fire retardant properties. Suitable for industrial processing for interior decoration and furniture production. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as hospitals, airports, rest homes, theatres, hotels, etc. Firax withstands extreme heat and fire and has several national and international test reports.
|
|
|
High-density MDF with fine sanded surface, particularly screwable core and excellent fire retardant properties. Suitable for industrial processing, more specifically products for decoration of rooms where fire safety is a premium. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class). The board is used in particular in public buildings such as stairways, reception rooms, hospitals, airports, theatres, hotels, etc.
|
|
|
High-density HDF with fine sanded surface and excellent fire retardant properties. Suitable for industrial processing for interior decoration products and laminate parquet. Can be refined with paper, melamine, laminate or veneer. The board is heat- and fire-resistant and has low formaldehyde emission (E1 class).
|
|
Product name: MDF (plain/melamine)
Made in china
Size: 1,220 x 2,440mm
Thickness: 2-30mm
Density: +/-750kg/m ³
Face and back: sanded
Grade: MR/WBP glue
Formaldehyde: E2 class
Environment protection
Widely used for package, furniture manufacture, decorative firm, and building
|
|
The medium density fibreboard (MDF) is produced from the finest raw materials mainly high quality de-barked softwood. Can be supplied in various structures, paper faced one or two sides.
Compared to many other wood based materials MDF has a higher bending strength, a higher perpendicular tensile strength and excellent screw holding properties. The mechanical load bearing capacity and resistance of MDF are higher than those of conventional chipboard.
Better values are also obtained on swell behaviour. The medium density fibreboard is characterised by mechanical, technological and physical properties that are comparable with those of solid wood.
Characteristics
Optimum density profile
Excellent physical properties
Even fibre structure
Perfect surface quality
Application
Furniture making and interior fittings
Kitchen and bath furniture
Furniture backs
Folding elements
Drawer bottoms
Door skins
|
|
|
Fantoni MDF is made of "chips" of selected woods, which are washed and then refined by special metal discs which are able to separate the fibres without breaking them up. During these operations, any extraneous material is removed n order to ensure improved workability of the panel and reduced wear of metal tools. The fibres are mixed with resins and deposited in the form of a "mat" on a long moving belt: the entire mat goes through a prepressing operation to eliminate air prior to final pressing. The heat and pressure of this operation activate the resin which "binds" the fibres together to create the MDF panel. The Fantoni group is one of the major European producers of these panels.
|
|
|
Low-density MDF with hard and smooth sanded, fine surface. Suitable for industrial processing for interior decoration and furniture production. Can be refined with paper, melamine, laminate or lacquer. Fibrabel® is made of 100% softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (E1 class).
|
|
|
Standard high-density MDF with hard and smooth sanded, fine surface. Suitable for industrial processing for interior decoration and furniture production. The board can be refined with paper, melamine, laminate or lacquer, and is also suitable for use under load conditions. MDF Standard is made of 100% softwood and has no coarse fibres in the surface. The board is also very easy to mill and has low formaldehyde emission (E1 class).
|
|
|
Low-density MDF with hard, fine sanded surface and particularly screwable core characterised by extremely low formaldehyde emission. Suitable for interior decoration where the emphasis is on the use of ecological products. Can be refined with paper, melamine, veneer, laminate or lacquer. Pure is made of 100% softwood and has no coarse fibres in the surface. The board is very easy to mill and has the same technical characteristics as Fibrabel.
|
|
|
High-density MDF with hard, fine sanded surface and particularly screwable core characterised by extremely low formaldehyde emission. Suitable for interior decoration where the emphasis is on the use of ecological products. Pure is made of 100% softwood and has no coarse fibres in the surface. Can be refined with paper, melamine, veneer, laminate or lacquer. The board is very easy to mill and has the same technical characteristics as MDF Standard.
|
|
|
|
|
|
OSB - Oriented Strand Boards - are resin-bonded wood based panels made of oriented micro-veneers (strands). The strands are compressed into 3 or 4 layers, the surface layer strands are generally laid parallel with the long edges of the panel ("oriented") while the core strands are ideally at right angles to the surface layer strands.
The extreme level of surface orientation is the result of EGGER's innovative mat-forming technology. The strands are exceptionally long and fine compared to conventional manufacturing processes and core and surface layers are processed separately from the start of the manufacturing process. This manufacturing technique lies behind the consistent and groundbreaking qualities of OSB boards.
Characteristics
Even, light-coloured surface
Long, fine strands
High strength values
High dimensional stability
Minimal swelling
Application
Wall, roof and ceiling boards
Interior design
Shop fittings and exhibition stands
Cladding
Sandwich elements
Noise proofing
Warehouse and stage construction
Shelving
Packaging
|
|
High-density chipboard, MUF glued, with special oblique tongue profile, on two or four sides. The tongue profile ensures high stability and easy installation and allows blind nailing or screwing of the panels.
The Reno Floor Hydro has high rigidity and a hard, unsanded surface. This provides Reno Floor Hydro with great impact resistance. The hard, highly closed surface greatly facilitates cleaning of the floor.
The Reno Floor Hydro is produced with a melamine glue, allowing the board to retain its basic strength and minimise swelling and linear dimensional change, also in very humid conditions.
|
|
|
High density chipboard finished with a shining flush UV lacquer which is especially designed for concrete formwork. The UV lacquer is composed of 3 layers (1 pore-filler layer and 2 finishing layers), is resistant to lye and is waterproof. The board has a particularly screwable core, is MUF glued and subject to minimal expansion and swelling in conditions of high humidity. The board is easy to saw and has low formaldehyde emission (E1 class).
|
|
|
High-density chipboard with sanded, fine surface and particularly screwable core, MUF glued. The board is subject to minimal expansion and swelling in conditions of high humidity. Suitable for load-bearing applications in humid conditions. Can be refined with paper, melamine, veneer or laminate. The board is easy to mill and has low formaldehyde emission. Natural wood has values of < 2 mg/100 g dry substance; Naturspan HS achieves the same low emission levels. The board is free of isocyanates and phenol glues. Naturspan HS was awarded the first prize by the VBO in the category "ECO product". Naturspan HS is the new name for Naturspan-0.
|
|
High-density chipboard with large chips, sanded surface and particularly screwable core glued with high quality MUF glue. Has high ridigity and bending strength.
The specific composition of coarse chips and the special MUF gluing provide SpanO-SB5® with a number of additional strengths:
- The board undergoes minimal expansion and swelling under high humidity conditions. The swelling percentage of SpanO-SB5® after immersion in water for 24 hours is considerably lower than for an OSB board. Therefore, SpanO-SB5® can, while it awaits further finishing, easily be stored unfinished in various weather conditions for a number of weeks.
- Good bending strength in both directions through the combined use of a layer of large area chips and a high quality UMF glue recipe.
- After production the surface of the board is sanded to a uniform thickness, allowing for a high-quality finish. The board is easy to saw and has low formaldehyde emission (E1 class).
|
|
|
High-density MDF with hard, fine sanded surface and particularly screwable core, MUF glued. The board is subject to minimal expansion and swelling in conditions of high humidity. Suitable for load-bearing applications in humid conditions, Umidax® can be refined with paper, melamine, veneer, laminate or lacquer. Umidax is made of 100 % softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (E1 class).
|
|
|
Low-density MDF with hard, fine sanded surface and particularly screwable core, MUF glued. The board undergoes minimal expansion and swelling under high humidity conditions and is suitable for general, non-load-bearing applications in humid conditions. Umidax® Light can be refined with paper, melamine, veneer, laminate or lacquer. The board is made of 100 % softwood and has no coarse fibres in the surface. The board is very easy to mill and has low formaldehyde emission (A class).
|
|
FunderMax Organic Fibre Standard is our range of products for universal interior applications without special strength requirements.
These panels are type HB according to standard EN 622-2.
Organic Fibre Standard is unsanded and untreated on the top surface.
Raw blanks cut to size, sanding, special formats and special thicknesses on request.
|
|
| ... products without information |
| |
|
|
Wood panels: chipboard, MDF, OSB...
