|
|
|
Horizontal rinconero module with guillotine door. With a partition-wall and a frame to 4 faces of seen series, we have transformed this simple corner into the center of the living room.
|
|
|
Introducing EcoSmart’s new range of fireboxes – exciting additions to the Renovator Range. These lightweight stainless steel, "see-through", zero-clearance fireboxes have been created in response to demand for longer and slimmer models, and enable designers, architects and builders to use them in a greater variety of bespoke settings. And in line with the call for longer burners, the 1800 models come with three burners.
|
|
Grate Range
The Grate Range provides a selection of fireplace inserts that incorporate the EcoSmart™ Burner in a simple, traditional manner. A great way of rekindling a closed off open fire, or perhaps creating a unique fireplace feature - without the fuss.
|
|
700 Great Turbo Vision
Approved Standard INTO 13229
characteristics
Power: 14 kw
Output: 70,30%
Length of logs: 55 cm
Diameter of tube: 200 mm
Dimensions: H: 615 mm lg: 692 mm teacher: 445 mm
Guarantee: 5 years
Continuous fire
Weight: 142 kg
Other models:
- On the right-hand side glazed réf: 6675-44
- On the left-hand side glazed réf: 6677-44
- 3 panes réf: 6679-44
- without turbines réf: 6470-44
Equipment:
- Register of pulling
- 2 exits of hot air Ø 125 on the top
- 2 axial flow turbines flow 160 m3/h
- 2 speeds
- thermal Switch of safety
|
|
Superclima F80
Front insert in steel with forced hot air circulation, solid Alutec® fire box and cast iron fire bed. This insert is suitable for use in large fireplaces. It is able to heat up to 190 m3 with insulation in accordance to the law and in keeping with the manufacturer's instructions. Available doors: black (photo), nickel plated.
Overall thermal power (kW/Kcal) 9/7740
Fuel legna/tronchetti - wood/logs
Hourly consumption (kg) 3/2,4
Heatable volume 190
Minimum room volume (m³) 38
Diameter of smoke outlet pipe (cm) 16
Weight (kg) 150
External air intake (cm²) 150
Flue pipe section (H= 3 m min.) (cm) 20x20 o ø 20
Fan capacity (m³/h) 300
Power consumption (W) -
Noise production (dB) 45
|
|
The RAIS 60 Insert is a beautiful and elegant replacement for any open fireplace. An open fireplace replaces the air four times an hour and has an efficiency of only 10%. A RAIS insert can achieve efficiencies up to 70% and better.
RAIS 60 Insert is designed to fit into an existing open fireplace or as an insert in a new setting. The RAIS 60 Insert fits into most masonry fireplaces and requires a zero clearance firebox for new construction.
Produced in a timeless design that incorporates the highest standards of wood-burning technology, the RAIS 60 Insert efficiently utilizes the latest in combustion technology like all RAIS free-standing stoves and allows for a view of the fire and the flames through a large glass door. The door is hinged on the right or the left side as specified.
RAIS 60 Insert is equipped with the patented RAIS air-cooled hollow handle that allows for use without a mitten, and has a bolt-locking mechanism made in solid brass that ensures an air-tight lock for efficient wood burning.
|
|
|
The Stûv 16 are very compact stoves designed to be inserted with no major work into existing hearths, and produce efficient and economical heating. They are nowadays used more and more in new buildings, as well as in renovations.
|
|
Somerset - a traditional English hob-grate for burning wood or gas.
Handmade from polished steel with authentic mouldings and features.
(Shown here with a Springfield surround in limestone).
The Acquisitions range of traditional fireplaces is one of the finest and most comprehensive in the world, encompassing every material from Imperial White marble to the finest limestone and every style from Regency, through Georgian to Victorian. Let us guide you through the stunning range of options for your home and help you choose the perfect centrepiece for any room.
|
|
See the full range of steel and cast-iron tradional or contemporary fireplace inserts by clicking the link to our site.
Our unique inserts are made to the same exacting standards as the orginals produced in the Eighteenth and Nineteenth centuries.
The steel inserts are hand-made from solid steel, and using finishing and polishing techniques developed over decades, these are the finest products of their type that you can buy.
Our cast iron inserts - many of which are made using the original Victorian patterns offering fantastic definition - are finished to the highest standard in 9mm thick iron.
Each design is compatible with our range of stone and marble mantels and are suitable for real fires, our gas fires and also our electric fire conversions.
|
|
|
Monobloc insert fire made from an internal casing of (4mm thick) steel and an external casing. The structure is designed to offer thermal efficiency and substantial heat recovery due to the thermal exchange which occurs between the walls of the fire and the steel air channels which surround it, allowing the circulation and reheating of the air without it coming into contact with the flames. The firebox in Aluker® has a large capacity for heat storage. The removable Aluker® plates can be easily replaced. Grate with log retainer and upper baffles in cast iron. Ash panel removable even when fire is lit. Pre-regulated flue damper. The glass door remains clean due to a secondary air wash system. Combustion is regulated by a flow of primary and secondary air. Standard with ventilation kit.
|
|
IS 85 is characterised by its large dimensions.
Characteristics
- Monobloc: in varnished steel
- Heart: in steel, with removable cast iron panels
- Door: steel with ceramic glass resistant to temperatures up to 750 °C
- Handle: in steel
- Primary and secondary air: adjustable manually
- Ash box: can be removed when the hearth is switched on
- Fire level: with cast iron grill and grill shaker control
- Smoke exhaust: top
- Heating: natural or forced convection
- Ventilation:
standard ventilation kit with authomatic on/off switch and 4 speed control
|
|
Perfect symmetry and a full view of the fire for IS 75 Q.
Characteristics
- Monobloc: in varnished steel
- Heart: in steel, with removable cast iron panels
- Door: steel with ceramic glass resistant to temperatures up to 750 °C
- Handle: in steel
- Primary and secondary air: adjustable manually
- Ash box: can be removed when the hearth is switched on
- Fire level: with cast iron grill and grill shaker control
- Smoke exhaust: top
- Heating: natural or forced convection
- Ventilation:
on request ventilation kit with manual on/off switch and speed control
|
|
Mérapi
CHARACTERISTICS
Radiator out of enamelled steel. Cast iron bottom.
Operation all, little or nothing (electronic regulation with 2 paces).
Startup thermostatic of ventilation.
Electronic ignition without permanent pilot.
Control flame by ionization.
Very high output.
Connection chimney or suction cup on the top of the apparatus.
Nose of suction cup enamelled your stone.
Radiator guaranteed 3 years, guaranteed parts 1 year.
Operate by remote control with communication radio frequency with operating range of 10 Mr. CE:
- Stop/Forced march.
- Forced march:
Adjustment of the intensity of the flame
Speed regulation of ventilation
- Regulation of the room temperature (5 to 35°C).
- Programming personalized of the heating at the minute near over a week:
Intensity of the flame
Speed of ventilation
Room temperature
|
|
The decorative fireplace to gas IG70 is an apparatus to watertight room, natural draft (balanced flow) working to gas methane or GPL. The classification acronym is - C11 type - used term in order to describe an apparatus whose circuit of cumbustione to is held regarding the premises in which it is installed: the withdrawal of money of the comburente air and the drainage of the products of the combustion happen directly outside of the premises by means of a coaxial pipe.
The apperecchio CE is accredited second the enforced norms in Italy. The homologous one comprises or the fireplace that the relative drainage smoke (pipes and finishes them of drainage) that they must be obligatorily supplied from the constructor. Construction, installation, participations, modifications and maintenance of the systems to gas must be carried out exclusively from operating ablilitati to the law 46/90 and in compliance with the norms ONES 7131 and ONES 7129.
|
|
| ... products without information |
| |
|
|
Fireplace inserts
