|
|
Floor lamp, column, providing diffused light. Metal frame with flower decoration, laser cut. Inside: white methacrylate
colour:
white
black
on request: other RAL colours (min 5 pcs.)
light source:
incandescent
bulbs:
5x60W E27
dimensions:
height: cm 188
diameter: cm 26
basis diameter: cm 30
|
|
Standing cylinder lamp (decorated metal mesh)
A decorated screen ´stands´ on the floor or some cupboard etc. Preferably placed the way that you can walk around it to realize well the play of light, reflection and shadow, changing with your position. A shaped pin holds together the ends of the screen and at the same time keeps the light bulb on the right spot.
Different designs/ lay outs possible.
(Material: galvanized metal mesh and soldering tin with silver. Size: 40x40x95 cm)
Another standard light object available (see brochure for image): Rolling lamp.
Inspired by an embroidery hoop this lamp contains two layers of decorated metal mesh. The light is placed inbetween - as a result you will notice a reflection and a shadow side (see picture detail). Preferably used as floor lamp but of course the light can be placed on a table or cupboard as well.
(Material: stainless steel hoop, galvanized metal mesh and soldering tin with silver. Size diameter: 30 or 100 cm)
|
|
ONA 6198
Floor lamp with polyethylene rotomoulded diffusing shade. Incorporates two T5 80 W fluorescent lamps with G5 bulb holder and includes electronic ballast. Dust- and water-proofing are IP65 rated, allowing both indoor and outdoor use. Two types of base are available: 400 mm diameter and 250 mm diameter. (The latter must be screwed to the floor.)
The height of this model is 1994 mm and the shade diameter is 297 mm.
T5 lamps are available in white (830 K) and in red, blue or green.
|
|
Lamp made of a steel leaf, lasercut, white lacquered.
Exists in two sizes : height : 127 cm and 65 cm, diameter 33 cm and 16cm
|
|
|
Cylindrical lamp made of a Plexiglas outer structure of a thickness of 4 mm and a core made of Murano glass receiving the light.
|
|
|
Made in silicone, available in blue, orange, white or black color. 5 Incandescent (MAX 5x100W) or low-energy consump (MAX 5x20W) E27 bulbs. Size 180x28x22cm. GOOD DESIGN 2008 Award, awarded by The Chicago Athenaeum: Museum of Architecture and Design
|
|
LUMINESCENT COLUMN THREE-COLOR PROCESS
Height at the request of 800 mm to 2500 mm
Automatic change of the colors
Change of the colors synchronized on request
(according to calendar, time rates/rhythms or temperatures etc)
Structure:
- Foot stainless microball 316L
Æ 220 mm Hteur: 595 mm, ép. 4mm
- Tube opaline white polyethylene glossed completion,
Æ 210mm, ép. 3 mm, luminous part from 200 to 1900 mm
- Source of light: Stud 18 power diodes ref. 90171003
IP67
- Food: by source with controlled current
- IK 10
- Anti-UV
- Anti vandal
- Temperatures - 20°C +40°C
|
|
Lamp rolls balls money - out of metal - Dimensions: L. 26 X L. 26 X H. 75 cm
Lamp rolls balls money - out of metal - Dimensions: L. 26 X L. 26 X H. 75 cm
|
|
Volga Tribal is a lighting totem ready to evoke far civilizations and unknown lands, it furnishes with sober elegance modern houses, for which it seems particularly suitable, even in the most fanciful placing-solutions.
The lamp is obtained by the conjunction of 12 or 18 polypropylene modules, connected by 9 or 12 stainless steel pawls.
Volga Tribal is available in floor standing and ceiling versions.
|
|
|
Honey is a family of modular lamps, which were designed as luminous sculptures that grow vertically, like Brancusi's "Infinite Column". The lamps are composed of three polycarbonate moulded elements: a triangle/ diffuser, a ribbed frame, a topping element. Honey is fitted with spring-locks and requires no further tools for assembly. By overlapping these various elements it is possible to create a lamp of any desired dimensions, from one to nine modules. The multi-lenticular texture provides the same type of light, only softer, of retro - reflecting accessories; it distributes the luminous flow emitted by the source placed at the base of the lamp inside the device, and captures natural light, making the surfaces of the lamp iridescent when switched off.
|
|
Ceiling-to-floor tutular lamp in extensible, removable and washable lycra.
This lamp work on by strech of the lycra and the base-support is movable.
|
|
Battista
Designer: Donato D'Urbino e Paolo Lomazzi
Iit is a light source and, at the same time, a sculptural presence.
Stem: white polyethylene with an inner neon light.
Reinforced base, also in polyethylene.
Upper part: chrome-plated steel.
|
|
|
Florr lamp available in iridescent metacrilate white or brown, or in transparent grey metacrilate. Offers a direct, diffuse light directed upwards
|
|
Materiale: Feet: chrome / shade: cream coloured cotton
Light source: E27 max 60W
Height: 150 cm
Diameter: 28 cm
|
|
Designer Josep Aregall
Materials and finishes
Metal structure. Black lacquer. Translucent
shade.
|
|
Elegance as a mix of materials: From blown glass following the ancient art of Murano to wrought iron expertly worked by master craftsmen, from the gold that lines the most prestigious products to the Swarovski crystal in our most exclusive pieces. Each detail is a symbol of beauty and luxury, binding our products to our land and tradition.
6700/LT3
Hand cast structure, decorated with rust and gold leaf.
|
|
ondalina P
christophe mathieu 2002
As if it were a light sculpture, Ondalina is built between sinuous,
organic and fluid forms to show that the objects may transcend its mere function and convert into magic elements that awake feelings and brighten up rooms. This lamp, made of glossy acrylic, calls ones attention: switched
on, it creates a suggestive and delicate atmosphere; switched off, it sets up as a constant presence that strongly personalizes any room.
The waves of the lampshade provide the source of light sieve needed to light gently, and extensively. There are two versions: the standing Ondalina, resting in a metal base, and the hanging Ondalina, which floats bound to the ceiling.
|
|
Valzer
Design Pamio Design 2003
Produzione 2003
Valzer is a floor lamp consisting of a central steel stem which supports the lamp, covered by a cylinder with fabric which is rotated through 90 degrees round the central axis.
In this way, the fabric becomes animated and the whole unit becomes dynamic, with a rotation that resembles a gentle dancing motion. The structure is in steel with white epoxy powder paint finish and the cylindrical shade is covered in white flame retardant TREVIRA CS' fabric, which is fully removable for washing. Available in two heights: 1800 mm and 2100 mm.
The lamp is supplied with six 75 Watt incandescent bulbs E27 socket for 230 Volt or E26 socket for 110 Volt. Fused dimmer.
|
|
Lamps with base in wood stained wengè or honey colour.
Shade in opal white blown glass.
Pendant available only in transparent blown glass with inside pyrex.
Electric cable lenght cm 200;
net weight kg 17,5.
Bulb:
sup. 1x max 150W E27 alogena;
dimmer. Inf. 2 x max 30W G13 fluorescente.
|
|
|
CLEAR is a collection made of a central transparent glass tube that is used to hold and slip several mouth blown borosilicate glasees in a rasin form. The electrical part is so light that is difficult to see, made of chromed steel. This collection is composed by a 4, 5, and 6 light combination, 12V-20W including dimmer. The input cord is at the bottom, therefore can be plugged in any plug without specific installation.
|
|
Design by The Unnatural Light Company
Polycarbonate Fresnel lenses housed inside an acrylic tower with a polished glass base.
Materials: Acrylic, Aluminium and Glass
|
|
|
Basic. A cube, a simple shape, the synthesis of the Pd3 collection, which thanks to the particular qualities of Starlight enhanced by internal light becomes an object of design.
|
|
The Remake Light classic is a modular lighting system
to compose and vary shapes of light.
Thanks to its unique rotating plug system, the modules connect wirelessly to one another
vertically or horizontally. .
Dimensions of one module: 24x17x17cm
The module is made of injected coloured SAN with a glossy finish.
|
|
The Remake Light classic is a modular lighting system
to compose and vary shapes of light.
Thanks to its unique rotating plug system, the modules connect wirelessly to one another vertically or horizontally.
Dimensions of one module: 24x17x17cm
The module is made of injected coloured SAN with a glossy finish.
|
|
|
Made in white silicone. 4 fluorescent (MAX 4x24W) G5 bulbs. Size 96x82x20cm. Linkage up to 5 units. Options bulbs white, blue, red or green.
|
|
lamp sleepless from earth.
it is a bed-side table, a side table, an luminous storage.
230 V MAX 8 W G5
|
|
| ... products without information |
| |
|
|
Designer light columns
