|
|
Heat Insulation Composite System / Strip Tile
Attractive protection against atmospheric influences
Heat insulation composite systems help to considerably reduce the energy costs and are also successfully used at the renovation of old buildings. Ceramic coverings present themselves as an ideal terminal layer on outside walls. They can be laid without any problems, protect the facade against atmospheric influences and open up varied aesthetic design possibilities in addition.
Proven for thousands of years
Especially in the field of facades, ceramics, one of the oldest building materials of the world, shows its decisive advantages: the material which has proved for thousands of years is frostproof, colour- and light-fast, easy to clean, particularly durable and thus economical. Ceramics is non-combustible and does not develop toxic gases even in the case of fire at extremely high temperatures. Its superiority also becomes apparent in the facade areas exposed to impacts and soiling, because ceramics is by far more resistant than plaster and particularly easy to clean.
|
|
The alternative for connoisseurs
Developed as an economical and design alternative to the KerAion facade systems, the system KeraTwin is convincing by architectural flexibility and visual variety. The double-webbed design of the ceramic stoneware panels ensures an increased resistance to breaking in areas at risk. And the 8 mm wide joints are realized in such a way that the construction is optimally protected against driving rain. In addition, a joint profile is now available for all KeraTwin systems.
Innovation and design
With the new systems K15 and K18 (patent applied for), Agrob Buchtal once again demonstrates its innovative strength. Three types of fastening and the low own weight of 25 kg/m2 and 32 kg/m2 respectively permit a particularly economical installation even under difficult conditions. With its wide range of colours and effects, up to project-specific special solutions, KeraTwin design is ideal for creative facade design in contemporary look.
|
|
Coco
TAUTEC
M 20 x 20 / 30 x 30 / 40 x 40 / 60 x 60 / 60 x 120
M 8 x 8” / 12 x 12” / 16 x 16” / 24 x 24” / 24 x 48”
|
|
System FP of stuck facades
The facade constitutes the skin of the building. The adhesion of the ceramic pieces implies that the possible tensions that can be generated transfer finally to the tiles. Reason why the design of the same, the used system of gluing and products must offer the security and guarantee adapted to absorb these movements.
|
|
System FP of stuck facades
The facade constitutes the skin of the building. The adhesion of the ceramic pieces implies that the possible tensions that can be generated transfer finally to the tiles. Reason why the design of the same, the used system of gluing and products must offer the security and guarantee adapted to absorb these movements.
|
|
System FP of stuck facades
The facade constitutes the skin of the building. The adhesion of the ceramic pieces implies that the possible tensions that can be generated transfer finally to the tiles. Reason why the design of the same, the used system of gluing and products must offer the security and guarantee adapted to absorb these movements.
|
|
Edival building in Valencia
PHASES OF ASSEMBLY OF THE SYSTEM
1. Modulation of the facade: determining the exact position of
the pieces and of perfilería necessary according to planes and fixation of
perfilería.
2. Positioning of the heat insulation.
3. Positioning of the joined pieces of Ston-Ker by means of subjection
mechanics and chemistry.
4. Positioning of the pieces of Ston-Ker by means of mechanical subjection
and chemistry in closings of windows.
|
|
|
A solution that is especially recommended for crowning structures tht are placed on the plane of the facade, with the exclusive Frontek extruded ceramics piece adapted to each project. An innovative approach for those designs in which the uniformirty of the materials is of the utmost importance.
|
|
TERRART®-Mid provides medium-format elements, which are individually manufactured according to the clients desired dimensions.
A suspended façade construction that is ventilated at the rear offers an ideal way to implement aesthetically suitable and modern architecture.
NBK Ceramic has a comprehensive TERRART® product line, which is adapted to individual specifications and suits the special wishes of customers.
The special TERRART® Flex substructure system offers the flexible basis for almost limitless possibilities.
|
|
TERRART®-Shingle are flat ceramic elements, which are arranged in such a way, that the horizontal joint is overlapping. TERRART®-Shingle is therefore suitable for use in a so-called scaled façade.
A suspended façade construction that is ventilated at the rear offers an ideal way to implement aesthetically suitable and modern architecture.
NBK Ceramic has a comprehensive TERRART® product line, which is adapted to individual specifications and suits the special wishes of customers.
The special TERRART® Flex substructure system offers the flexible basis for almost limitless possibilities.
|
|
NBK Ceramic manufactures a huge number of individual special shapes besides the standard elements, the design of which sets no limits.
Among other things, ceramics with changing radii are possible for elliptical elements. The elements are developed according to custom made designs if required and even handmade solutions are possible.
|
|
Designs with an exclusive touch
The scope of creative facade design is considerably enlarged by our varied range of exclusive special pieces. In addition to the standard sizes, the rectangular tube and the 3D profile are also available in lengths of up to 1.20 m, which can be combined with all facade systems. They can be combined with all facade systems.
Whether strictly angular or softly rounded: both categories of forms can be realized in numerous variations. In this way, external corners, embrasures and other projections can be integrated in a visually harmonious manner and safely executed with regard to construction physics. Tensions due to extreme changes in temperature, which may occur in the case of facades made of different building materials, are avoided.
|
|
TERRART® Baguette are ceramic pipes with square, circular or oblong cross-sections, which can also be made as curved elements or as double baguettes on request.
A suspended façade construction that is ventilated at the rear offers an ideal way to implement aesthetically suitable and modern architecture.
NBK Ceramic has a comprehensive TERRART® product line, which is adapted to individual specifications and suits the special wishes of customers.
The special TERRART® Flex substructure system offers the flexible basis for almost limitless possibilities.
|
|
In addition to the largest selection of façade bricks in the world, Wienerberger also offers ArGeTon® bricks façade panels!
The ArGeTon® brick façade panels
Two individual panels of fired clay with top, bottom and drip notches are combined with connectors into a single ArGeTon® brick panel. They are available in the colours: Salmon/pastel red, Tuscan red, natural red, red-brown, light grey, platinum grey, metal grey, volcano grey, sand colours and Sahara yellow. The axis length of the panel width ranges from 300 to 450 mm, the axis length of the panel height from 150 to 250 mm with a panel thickness of 30 mm.
The advantages:
Lasting, light-resistant colour
Frost-resistant
Resistant to aggressive substance
No blooming effects
Satisfies roofing regulations
Deformation-resistant
Non-flammable
Can be combined with insulation
|
|
A timeless and state - of - the - art façade with the unique characteristics of ceramics.
Inspired by this idea, ArGeTon was developed as a rear ventilated curtain wall made from clay at the beginning of the eighties.
Enjoy the benefits offered by a modern and international partner, who will use the innovative production systems to your advantage. Rely upon us! We guarantee a proactive, modern approach, sales and distribution suited to your requirements and consequent quality assurance of a large
group. ArGeTon has its roots in the globally active company - Wienerberger, the largest manufacturer of bricks in the world.
Consequent optimisation and further development of the product features, formats and colours helps ArGeTon fulfil customer requirements and react to individual wishes in a flexible manner. For example, ArGeTon is the first manufacturer of ceramic façade panels that has passed the %u201Cballproof test%u201D in conformance with DIN 18032-3. Thus, the ArGeTon façade is particularly suitable for buildings that are subjected to high mechanical stress, e.g. schools.
The secret of our success lies in dialogue and know-how. We will ensure that in future as well you will receive consultation from the best experts only. For every project, we will find together the best solution. We look forward to new challenges and tasks.
|
|
Can one talk about a revolution with regard to a material? In the case of Cottostone, reality goes far beyond the imagination, making possible through advanced technologies what in nature is unfeasible.
Theancient tradition of “coccio pesto” (crushed terracotta), which can be found in the houses of Pompeii and many Palaeo-Christian basilicas, is adopted with exceptionally large terracotta slabs measuring a maximum of 120 x 300 cm.
On one hand we have terracotta made from clay dried in kilns at over 1000 °C and on the other, blocks of material obtained from the mountains and then cut into slabs for cladding: Sannini, in a joint-venture with Stone Italiana, patenting this new material - a blend of history and technology - has succeeded in founding two different cultures, two different methods of use, associating the qualities of one to those of the other.
The traditional limitations of dimension are nothing but a memory, while an unknown world for terracotta is opening, a world of raised floors in reinforced Cottostone, cavity walls and all the potential uses of stone known to this day.
In its basic sizes of 60 and 120 cm, Cottostone leaves the factory chamfered and gauged as well as having such a low absorption level that treatment is not required after laying.
Currently available in four variations with the best quality cotto, crushed and bound with specialresins and natural quartz, this material is an absolute novelty to the world and represents Sannini’s challenge to conquer the third millennium.
|
|
|
CURVED appeareance. For the sound-proofing of all facades.
|
|
|
FLAT TILE appearance. The beauty of facades of the past with the security of "ACCROCHE" system.
|
|
|
CERAMIC TILE appearance. Integrates perfectly with modern architecture.
|
|
|
A double PRECIBRIC combining the advantages of estetic PRECIBRIC, an economy the liteaux one and reduction of the exposure time
|
|
|
PLAIN appearance. BARDEAUDAL to your dimensions. An ideal solution for precise elevation.
|
|
|
Descriptive diagrams of the system of car-fixing-locking of the concept "HANGS it" and the small technical guide practices and simplified of installation.
|
|
The colour tones and surfaces that are portrayed here only represent a selection from our range. Any nuance is possible if requested. It is absolutely essential that an original sample is submitted, in order to establish the colour tone.
Warm, earthy nuances - terracotta's natural palette of colours range from light yellow tones to brick red.
Further colour tones are possible according to customer's wishes, besides the existing standard colours in the catalogue.
Whether it be a monotone coloured environment for a harmoniously designed façade or deliberately incorporated shading for an especially lively effect -
NBK Ceramic satisfies all possibilities.
The colour tones of glazed finishes can be specially ordered or selected according to RAL specifications.
|
|
Porcelain tiles combine durability with maximum resistance to impact In addition, they are hygienic, easy to clean and come in a wide range of highly attractive (natural or polished) finishes. Their forms and characteristics make them comparable with natural stone.
The polished finishes can offer spectacular light reflection of more than 70%, making it the ideal choice in settings where the aim is to create a sensation of greater space; whilst the matt finishes guarantee excellent resistance to high traffic and are consequently highly recommendable for use i. public and commercial spaces.
|
|
Grespani has two factories incorporating the latest technologies and most advanced manufacturing processes. One is devoted to the production of porcelain tiles and the other to the production of white-paste wall tiles.
45X90
|
|
Grespani has two factories incorporating the latest technologies and most advanced manufacturing processes. One is devoted to the production of porcelain tiles and the other to the production of white-paste wall tiles.
Format 45X90
|
|
|
|
Ceramic facade cladding
