|
|
Overview
Pilkington Optilam™ is the brand name for our laminated glass range an alternative solution for impact safety. The glass will break following impact but will remain in place thus preventing injury.
Pilkington Optilam™ is produced by combining two or more sheets of glass with one or more plastic interlayers. Two types of interlayer are used, which have differing properties. The most common is a polyvinylbutyral (PVB) interlayer, which is applied with heat and pressure in factory controlled conditions.
Laminated glass can also be produced by a cast-in-place (CIP) process, in which a resin is poured between two panes of glass held apart by a spacer at the edges. The resin is subsequently cured and the product is known as Pilkington Laminated Glass.
The performance of Pilkington Optilam™ and Pilkington Laminated Glass can be varied by changing the number and thickness of each of the panes of glass, and the PVB or CIP interlayers. This provides the specifier with a wide choice of products depending on application, whether it be for safety or security, noise control, solar control, UV screening, blast resistance or privacy and decoration. See also Pilkington Optilam™ I and Pilkington Optilam™ Phon.
|
|
Laminated glass is made by bonding two or more simple lights of glass to PVB (polyvinyl butyral) sheets, a plastic substance with excellent adhesion, elasticity, transparency and resistance.
It is also possible to temper glass before laminating (Stralami Temper).
|
|
Laminated glass: two layers of 12mm (1/2") clear tempered glas with an interlayer of 0.090"
|
|
Overview
This laminated glass incorporates a choice of eight standard coloured interlayers, offering a wide choice of colours.
Benefits
Remains intact or breaks safely on impact reducing the risk of serious injury.
Resists attack for longer as it remains bonded to the interlayer - specialist high performance security glass also available.
Can be used in Insulating Glazing Units, for different combinations of benefits.
Up to Class A impact performance to BS 6206.
Up to Class 1(B)1 to BS EN 12600: 2002.
Wide range of colours available.
Reduced colour fading.
Interlayer colour is independent of glass thickness, allowing more design options.
|
|
|
Laminated glass consists of two or more lites that are permanently bonded by heat and pressure with one or more plastic interlayers of polyvinyl butyral (PVB). Both the glass and the interlayers can be supplied in a variety of colors and thicknesses to provide the desired appearance.
|
|
Overview
The Pilkington Oriel Collection is our premium range of decorative glass. It comes in a choice of four designs offering charm through to sophistication enabling the interior of your home to benefit from the natural light-enhancing properties of glass.
Each of the 4 designs is availabe on a clear or patterned glass substrate.
Pilkington Oriel Collection generally offers a relatively low level of obscuration so, if privacy is an important consideration, it is important to view a sample of the glass before making a final choice.
Each design can be toughened or laminated for safety or security and can be incorporated into Insulating Glass Units for thermal insulation or noise control.
|
|
Overview
For privacy, pure style or to allow more light into internal rooms, decorative glass gives you a whole range of attractive options. In fact, Pilkington gives you no fewer than 18 different patterned glass designs - from classic to contemporary, no one offers a bigger choice.
Benefits
Pilkington Texture (Patterned) Glass offers privacy and style throughout the home.
Five levels of privacy are available, graded from 1 (least obscuration) to 5 (greatest obscuration).
There are 12 original patterns in the main range and 6 in the replacement range.
Toughened or laminated versions are available for safety and/or security.
All are suitable for double glazing.
The range is widely available from your local glass merchant or glazier.
|
|
|
Bring the mysterious, pearlescence of the ocean into your home with this colorless, playful panel infused with capiz shells.
|
|
Innovative 3D textile to create innovative space, horizontal/vertical for commercial and residential applications.
100 % polyester
Anti microbic
Anti static
UV treatment
Available in white. Colours upon request.
|
|
Playing with transparencies
SatenDecor® artistic designs create harmonies or contrasts through a seductive game of transparencies. Here we present different styles which highlight the glass when creating atmospheres and decorating. Designs that communicate with us through their shapes and the smoothness of their texture. We also create customized designs for our clients. Consult with us your idea.
CHARACTERISTICS
Colours: extraclear, white, bronze, grey, green and pink.
Thickness: 3, 4, 5, 6, 8, 10 and 12 mm.
Size: Standard 225 x 321 cm / Optional: 180 x 321 cm.
(Consult for other colours. Also available: laminated and mirror).
APPLICATIONS
Especially recommended for doors, partition screens and walls, furniture in general, shower cabins and also exterior architecture.
Offices, homes, public areas (museums, hotels, schools...), industrial premises...
ATTRIBUTES AND QUALITY
> Base: float glass norm UNE-EN 572-2
> High resistance to stains and fingerprints.
> Can be cut, bevelled, curved, drilled, tempered and laminated.
> Awarded the ISO 9001 (quality control) and ISO 14001 (Environmental safety) Standard Certificates.
|
|
|
LX-57B X-Ray shielding lead glass offers excellent radiation protection and superb visual clarity. The polished surfaces are scratch resistant, and LX-57B does not discolor due to radiation. LX-57B is high quality optical grade, lead barium type, X-Ray Shielding Lead Glass that consists of over 60% heavy metal oxide that includes a minimum of 55% Pbo. LX-57B comes in three thicknesses: LX8 (8 mm) is used in most X-ray radiation applications. LX11 (11 mm) and LX14 (14 mm) are used when greater protection is required, for example, in cancer/flouroscopic treatment facilities.
|
|
Low-emissivity ARIPLAK Low E is a high performance glass.
In the manufacturing process, one or more layers of metal and metallic oxide are deposited on one of the glass surfaces by a process of high vacuum cathodic pulverisation.
This treatment is carried out at a low temperature, not affecting the flatness of the glass.
|
|
ARIPLAK Solar Control Glass is produced by depositing one or more metallic layers onto the glass surface by means of high vacuum cathodic pulverisation.
This treatment is carried out at a low temperature, not affecting the flatness of the glass.
The sun has a surface temperature of 5,700 K. At this temperature it emits radiation whose peak can be found on a wavelength of 500 nanometres (central zone of visible radiation); this radiation is partially absorbed by the earth’s atmosphere.
The distribution of the remaining energy on the earth’s surface Ariplak Solar Control Glass allows greater control over light and energy transmission, and offers a wide range of aesthetic options.
In climate-controlled spaces, where air-conditioning is essential, it is advantageous to eliminate as much of the sun’s radiant energy as possible.
This multi-layered metallic coated glass provides the solution, along with subsequent energy savings.
When the coatings are combined with tinted glass, many different reflected hues can be created, making available a full range of colours and solar protection properties
|
|
Solar-control glazing with thermal insulation
The solar control function is achieved by applying a selective metal coating.
High light transmission, low solar heat throughput
Stopray solar-control glazing with thermal insulation is ideal for all climates: combines solar control in summer with thermal insulation in winter
Various colours, including an extraordinary neutral, low light-reflection range
Application: always in double glazed units. Monolithic glass available to processors
|
|
|
Performances in terms of insulation, management of the solar contributions, and optimized transparency. By the research task carried out in the field of the ultra-selective layers, INTERPANE developed a generation of glazings which can from now on circumvent the difficulty in building frontages of glass without the interior of the building being penalized by temperatures as much excessive than unverifiable
|
|
OKASOLAR Glazing with integral sun control Louvres
OKASOLAR insulating glass is a daylight system which contains an element made form specially developed, fixed reflector profiles in the inter- pane cavity. These elements can be used for various applications:
seasonal and daylight controlled sun protection
permanent sun protection
light control
passive solar elements
|
|
Overview
The cool blue glass creates a comfortable interior without sacrificing natural light.
Richer than pale blue, softer than deep blue, Pilkington Arctic Blue™ is a body tinted float glass providing high daylight transmittance, good solar control and attractive cool colour.
For optimum solar and thermal performance, combine Pilkington Arctic Blue™ with Pilkington K Glass™ or Pilkington Optitherm™SN in an insulating glass unit.
Pilkington Arctic Blue™ is available in 4mm, 6mm, 8 mm and 10mm thicknesses offering increased strength and intensity of colour.
Benefits
The rich blue colour is cool and distinctive, offering unique aesthetics and innovative design properties:
Excellent solar characteristics without sacrificing daylight transmittance when compared to traditional body tinted float glass.
High visibility means Pilkington Arctic Blue™ provides a crisp, natural view from the interior.
Low exterior reflectance makes Pilkington Arctic Blue™ ideal for use when low glare is a priority.
Easily fabricated into Insulating Glass Units in annealed and toughened forms.
Available in 4mm, 6mm and 10mm thicknesses.
Available with Pilkington Activ™ coating for self-cleaning.
|
|
Overview
Pilkington Suncool™ is a range of superior solar control products with high visible light transmittance and low emissivity in one off-line product.
Benefits
Range of solar control colour and light transmittance options.
Offers the highest level of thermal insulation.
Cost effective solution for reducing energy consumption.
Available in Brilliant, Neutral and Clear for high neutrality.
Available in Silver, Blue, Brilliant Blue, Bronze, Grey and Green for varying performance and colour options.
External reflections ranging from a low 6% (Blue) to 46% (Silver).
Light transmittance from 70% (Neutral) to 24% (Grey) giving excellent light/heat ratios.
Ideal for large areas of glazing to control solar gain whilst providing high light levels.
Pilkington Spandrel Glass available for opaque panel requirements.
|
|
Facade systems
Creating open spaces. Realising creative concepts. Understanding architecture as an idea. This is the challenge we face.
For public and commercial buildings, as well as for industrial and administrative buildings. Whether classical mullion-transom façades, element façades, window façades, structural glazing or even three-dimensional objects, such as pyramids, polygons or cradle vaults.
With WICTEC façade systems, all conceivable variants are possible. Design diversity combined with technical variability are what we do best. Sight lines of 50 to 90 mm give rise to completely new creative freedoms. The possibilities for combining the different elements, as well as the compatibility of the systems, enable customised solutions.
However, there is more to façades than technical functionality and creativity; "intelligent façades" are becoming increasingly important. Energy savings, lower costs and greater quality of life are the keywords. Today, the focus is on the development of photovoltaic-, PSW- (passive solar wall) and DuoWall-façade systems. Here, too, WICONA offers a comprehensive range that is being extended and developed on an ongoing basis.
|
|
Float glass varnished on one side.
A special surface treatment ensures optimum adherence of varnish to glass, and enhances the brilliance and intensity of the colour.
Product range:
Lacobel, opaque varnished glasses;
Lacomat, translucent varnished glasses;
Matelac, Satin painted glasses - opaque glazing
|
|
A new technology has been developed to increase the performance of traditional double-glazing, where the traditional aluminium spacer is replaced for a thermo-plastic material (TPS).
This unique system allows the use of a high molecular weight gas filling, together with a structural silicone sealant.
The TPS formulation is based on polyisobutylene, desiccants and ultra-violet inhibitors.
|
|
The noise constitutes today one of the independent sources of pollution to be fought, and particularly in urban environment. Where glass can play a paramount part of heat insulator, it will be able to also fulfill an important role with the level of acoustic comfort. ipaphon is an asymmetrical glazing whose filling of the embedded blank is ensured by a specific gas.
Partially, an acoustic insulation sheet or a layer of resin will supplement the effectiveness of the unit. As the thermo isolation remains a concern impossible to circumvent, ipaphon uses the resources of layer iplus glass neutral E. Two reasons to answer the schedule of conditions with a single product
|
|
SGG PLANITHERM®
High performance low-emissivity glass
Marie-Elisabeth-Lüders-Haus
Your area : Germany - Berlin
By project type : Congress center, auditorium
Applications : Entrance Facade
Architect : Braunfels
Entrepreneur : Fenster Keller Neuenstein%0D%0ALindhorst Metallbau GmbH%0D%0ARadeburger Fensterbau
Date : 9/7/2004
|
|
|
|
Laminated glass, Solar control glass...
