Other facade cladding

61 companies | 264 products

Euroclad's Smart Fixing Systems simplify the complexity of façade design. The optimal fixing solution can be determined based on the substrate, panel type and materials used.Our bespoke static calculation programme ensures compliance with safety requirements...

{{productDetail[83254]}}
{{productDetail[66455]}}

PALDOOR flat extruded rigid PVC sheet was developed specifically for the door skins thermoforming...

{{productDetail[3682]}}

HPL panels (high pressure laminate) are starch to clean and durable eco-friendly...

PVC panels are compose by PVC sheet (which has standard dimension...

{{productDetail[62511]}}

Sub-structure, free of thermal bridges, for the assembly of large-scale facade panels with visible mounting e.g. fibre cement, aluminium boards and HPL sheets.

Beta Universal consists of stainless steel rods,...

Thermal-bridge-free substructure for assembling large-format façade panels with visible and concealed fasteners, such as fibre cement, aluminium panels, or HPL panels.

ALWI is made of vertical support profiles and TEKOFIX wall brackets. The support profiles hold the sheathing elements. They are fastened to the wall brackets with rivets...

Holding tracks for installation of large-size cladding panels with visible fixing, e.g. gypsum board, aluminium panels, HPL panels.

ALWI consists of vertical holding tracks and brackets. The holding tracks bear the cladding panels. They are connected to the brackets with rivets or screws.

The...

Holding tracks for installation of large-size cladding panels with visible fixing, e.g. gypsum board, aluminium panels, HPL panels.

ALKAPO holding tracks are an addition to the ALWI system and can generally be compared with these. However,...

Holding tracks for installation of large- and small-size cladding panels with visible clip-on fixing, e.g. ceramics 40/40, 60/60.

It consists of vertical holding tracks and brackets. The holding tracks bear the cladding panels by way of holding clips. The holding tracks are located so that they are behind each vertical panel joint....

{{productDetail[71666]}}

Original, effective and economical facades

There are many reasons for using canvas cladding or plain canvas dressing on new or renovated buildings. This is a fully-fledged construction material that enables buildings...

{{productDetail[51019]}}


DecorP06801-60Glitter Aubergine
Made...

DecorP04091-60Amazon Mahogany
Made...

DecorP10778-60Texas Pear
Made...


DecorP04397-60Macassar
Made...


DecorP04425-60Sun Teak
Made...

{{productDetail[49860]}}

cladding/façade support system which features a unique cladding rail support bracket (CRSB), which has been engineered to provide a universal solution to façades, whatever the building structure, the carrier rails, and whether for fixed or floating-point rail support.

The simplicity of the CladFrame system allows it to be used safely with any RigiSystems...

Corogrid is RigiSystems' unique spacer support system, which has been designed for use with double skin metal cladding systems.

Suitable for both newbuild and refurbishment applications, Corogrid offers an innovative and cost effective alternative to the traditional bar and bracket spacer.

The system also provides a more stable method...

{{productDetail[132981]}}

Boral TruExterior Trim is creating an entirely new category of decorative exterior trim that offers phenomenal performance, remarkable workability and a lasting look without the limitations that plague other exterior...

{{productDetail[65236]}}

This is one of our Grapamar multipurpose systems for porcelanic tiles, entirely made in Aluminum...

This is one of our succesfull Grapamar multiporpouse systems for porcelanic tiles. It has (DIT)...

Its one of our most multipurpose systems for stone. It has the DIT, Technical Approval Document which supports...

It's a DIT profile system in 6063T6 aluminium suitable for stone with...

Its a profile system for natural stone. It consists...

{{productDetail[62124]}}

Fixed anchoring of a great capacity and resistance, specificly to be mounted on a PF-ALU aluminium profile. The technique used in this anchoring is a stainless steel stamped and machined on a variable base flat bars, and machined with adjustment bushings which are placed in slotting in the axis of the claddings to...

Solid Anchoring to PF-ALU profile consisting of two machined superimposed flat plates and specifically designed for porcelain cladding or with thinner materials, from 8 to 20 mm thick. The fastening of the plates is carried out by means...

With this new profile-clip, Sistema Masa has excelled itself any other product existing on the market given its great versatility and speed when being mounted, allowing the laying out of the vertical profiles at random, regardless of the position of the vertical joints of the cladding. It is a system that gives an exceptional performance during assembly as it...

Completely hidden solid to vertical mountings and especially designed for thinner types of cladding such as gres porcelain, fibre cement, agglomerates, composites, glass, and high pressure laminates (HPL), etc. The system works together with a high...

The Masa Integral System has been designed in order to meet a technical requirement in the evolution of the fastening systems for ventilated façades: the inclusion of a closure as part of the fastening system as a light façade. This inclusion provides a great construction advantage, as it allows the direct fastening to the building structure efficiently resolving the...

{{productDetail[72555]}}
{{productDetail[61372]}}

For this project a tear resistant, specially created PVC tarpaulin material has been used....

{{productDetail[129909]}}
{{productDetail[124063]}}

A simple cladding support system typically consists of ‘helping hand’ brackets which are fixed to the substrate at set vertical...

A simple cladding support system typically consists of ‘helping hand’ brackets which are fixed to the substrate at set vertical and horizontal separations.

There are vertical brackets (these will be used in the majority...

NV1 is the NVELOPE back frame – vertical cladding applications.

NVELOPE ‘T’ and ‘L’ profiles are fixed...

NV2 is the NVELOPE system for concealed fix / structural bonding applications – vertical cladding applications.

NVELOPE ‘T’...

NV3 is the NVELOPE system for concealed fix/mechanically fixed applications – vertical cladding applications.

Secured using hangers and undercut stud anchors or screws to provide a concealed fixing.

Horizontal...

{{productDetail[119045]}}

The substructure precisely follows the buildings contours and accommodates tolerance in the as-built load-bearing structure. Whats more, it enables spot-on positioning of the halters, and can be installed quickly and efficiently....

BEMO-DOME VK, a rectangular tube curved to your specifications, is ideal for cladding cylindrical buildings with trapezoidal...

The BEMO-DOME RQ substructure, comprising the versatile Pi bracket and a custom-curved...

The BEMO-DOME RR substructure is ideal for projects...

{{productDetail[1842]}}

Sheet Stock is a cost-effective custom solution.
For renovation projects that require extensive moulding with various widths, Royal Trimboard® sheet stock is an affordable option that provides great flexibility for creating unique sizes and...

Resists hail, fading and dull home syndrome. Crown Select siding is hurricane-force wind tested, durable and beautiful. That leaves you very little to think about except which time of day to admire it. Choose from virtually...

Insulates against everything but jealous neighbors. Haven® insulated siding combines the looks of real wood and the energy efficiency of industry-leading insulation technology. Let’s call it very high tech. Our graphite-enhanced EPS insulation is made with Neopor®...

Stands up to distant foul balls and close beauty inspections. Your home investment is worth wrapping in an exterior that will look amazing for many seasons to come—baseball or otherwise. Our Journeymen® Select siding won’t warp, buckle, sag, peel,...

High standards and low maintenance live here. Our Residential® siding has been tested. Low-gloss wood grain that looks like natural wood? Check. Refusal to warp, buckle or sag? Yup. Roll-top nail hem fit that...

{{productDetail[49479]}}
{{productDetail[78986]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation