|
|
| Products 571 to 600 of 819 |
Interiors
Seating : Foam HR tri-density 50/36 and 18 kg/m3
Frame
Cross bar in solid beech wood with beech multiply side panels
Suspension
SBD 130 suspension*
Finishes
Frame : Simple saddle-stitching laid and double saddle-stitching open
Cushions : Simple saddle-stitching laid and double saddle-stitching open
Feet : PMMA Metal feet stainless finishing
|
|
Interiors
Seating : Foam HR density 50 kg/m3 and Fibre/feather
Back : Foam HR bi-density 30 / 26 kg/m3 and Fibre/feather
Frame
Cross bar in solid beech wood with beech multiply side panels
Suspension
SBD 130 suspension
Finishes
Frame : Double saddle-stitching open
Cushions : Saddle-stitching simple laid
Feet : Metal feet stainless steel finishing
|
|
Interiors
Seating : Foam HR bi-density 28 / 40 kg/m3 and Fibre/feather
Back : Foam HR density 30 kg/m3
Armrest : Fibre/feather
Frame
Cross bar in solid beech wood with beech multiply side panels
Suspension
SBD 130 suspension*
|
|
Interiors
Seating : Foam HR density 35 kg/m3
Back : Foam HR density 30 kg/m3
Cushions : Fibre/feather
Frame
Cross bar in solid beech wood with beech multiply side panels
Suspension
SBD 130 suspension*
|
|
Interiors
Seating : Foam HR density 36 kg/m3 and Fibre/feather
Back : Foam HR bi-density 30 / 26 kg/m3 and Fibre/feather
Armrest : Fibre/feather
Frame
Cross bar in solid beech wood with beech multiply side panels
Suspension
SBD 130 suspension*
Finishes
Frame : Double saddle-stitching open
Cushions : Saddle-stitching simple laid
Feet : Skid Skates Chromed steel (Ref. 9)
Other : * Specific fore-part for the convertible
Mechanism
* 2 fold slats/straps BULTEX mattress 35 kg/m3 thickness. 8 cm
|
|
|
Perfect combination of technology and art of living... WWW naturally fuses all your contours In the greatest comfort, Aerial, an infinite perspective at one glance, all in smoothness and lightness...
|
|
LOOP Attitude!
Slip, slide, exchange, turn around, add... LOOP is a module to be built as you wish, it frees itse" from space in order to adapt to all the situations. These sliding and removable cushions draft the broad
|
|
Sofa FLAIR by PATRICK MALETERRE
L221 X l 98 X h 83
available in 4 sizes /base made in métal inox
|
|
L260 X l 99 X h 74
available in 5 sizes /base in beechwood available in 10 colours
|
|
|
Pure, straight lines, forms of one pretend simplicity which it hides a complex structure and meticulous investigation as far as the design. Piece that transmits serenity, equipped with an extraordinary balance and an austere elegance. Minimalist model that expresses much with a great subtility.
|
|
Stained beech structure and wicker sticks
- removable seat and back cushions
- polyurethane foam
L180 x P100 x H 80
Gross Weight Kg 69 Fabric cm 700
Volume mc 1,21 H. cm 140
Seduta-Seat: H 45 � Bracc.-Arm: H 58
|
|
|
Sofa in handwoven black pulut, wooden frame, solid teak feet; woven seat, upholstery with polyurethane foams, dacron and down.
|
|
|
|
|
|
FRAME
Metallic anticorrosion painted covered by polyether. Arms: Solid wood frame covered by polyether.
Knock down structure.
A metallic embroidery frame with bayonets for an easy assembly.
SUSPENSION
Spring system “Intelligent System” with three options to choose: soft, middle or firm.
Suspension with a metallic embroidery frame for an easy cleaning under the sofa. Double inclination: 2 option, flat or inclined.
SEAT
2 option:
VISCOELASTIC 55 Kg. cushions + 35 Kg. Polyether.
Or FIBER cushions: combination of 33% polyether, 33% antiallergic hollow fiber, 33% down feather.
With wrinkle control.
BACK
Back cushion Combination of 33% polyether, 33% 100% antiallergic hollow fiber, 33% down feather.
Loose cushion TRD 30 combination of 70% down feather and 30% antiallergic hollow fiber.
There is no supplement for these cushions TRD 30 in case you choose the same fabric but different
FEET
Chromed metallic.
FOOTSTOOL
Solid wood frame covered by polyether.
COVER
Completely removable cover.
Loose covers separated into parts for its easy washing.
When it is upholstered in leather it is fixed.
OPTION
Sofas bigger than 238 cm. are modular. If you wish to, the 176, 196, 218 and 238 sofas could be also made as moduls.
|
|
Frame:
Metallic anticorrosion painted, arms of massive wood covered with polyether. Beechwood upon the arm varnished in wengé to match the feet .
Suspension:
"Intelligent System" with three options to choose: soft, middle or firm.
Seat:
35 Kg. polyether (cfc. free). With wrinkle control.
Back:
30 Kg. polyether. (cfc. free)
Feet and arms:
Beechwood varnished in wengé.
Fixed upholstered.
|
|
Frame:
Metallic anticorrosion painted; arms, front and back in wood covered by polether.
Metallic embroidery frame removable with bayonets for an easy assembly.
Suspension:
„Intelligent System“ with three options to choose: soft, middle or firm. Suspension with a metallic embroidery frame for an easy cleaning under the sofa. Double inclination: flat or inclined which allow an individual comfort in each seat.
Seat:
100% down feather with interior of 55 kg. double VISCOELASTIC inserted (cfc. free). „Memory foam effect“ cushions.
Back:
25 kg. polyether (cfc. Free), without raising cushion.
Kidney cushions:
TRD 30 in a combination of 70% antiallergic hollow fibre and 30% down feather.
There is no supplement for these TRD 30 cushions in case you choose the same fabric but different colour than the rest of the sofa.
Feet:
Beechwood varnished in wengé.
Completely removable cover. Loose covers separated into parts for an easy washing.
This model will not be upholstered in leather.
|
|
FRAME
Metallic anticorrosion painted combinated with solid wood on the back covered by polyether. Arms:
Solid wood frame covered by polyether.
BASE: Inoxidable steel silver metallized finishing. Knock down structure.
SUSPENSION “Nosag” metallic springs.
SEAT
35 Kg. Polyether (cfc free).
BACK
30/40 Kg. Polyether(cfc free).
FEET
Cast aluminium. Incorporating an antisiding rubber cap. Removable feet.
COVER
Fix upholstered.
OPTION
Metallic arm or corner arm.
The metallic arm can be placed on any side, except when using the corner arm as for arm function.
REMARKS
Low squared or rectangular table, beechwood varnished in maple, cherrywood or wenge.
Shelf squared or rectangular table, beechwood varnished in maple, cherrywood or wenge.
Occasional table 120x83 cm., beechwood varnished in maple, cherrywood or wenge.
|
|
7110 Gelderland
Designer Jan des Bouvrie
Extensive series. Armrests as you wish small of large.
|
|
Sofa with solid pinewood and multilevel wooden structure. Removable coverings in leather “marca-punto” sewed and in all our range fabrics.
Cushions: Mod.1 Relax, dim. 65x45x12
Mod.2 Relax, dim. 60x60x8
Mod.3 decorative Square, dim. 45x45x4
design Ennio Arosio
|
|
CUBES DOBIE is the ampliation of Cubes armchair to two places. It otters the same options than the single version and allows more possibilities. Design by Studio Bermell
|
|
|
Models of Mistral serie have modern and functional lines, that make them very suitable in any place, not only at home but also in restaurant.
|
|
|
Every Jon Edwards sofa possesses its very own expression of an individual feeling for life. With its versatile furnishing possibilities, Jon Edwards becomes a piece of personal lifestyle. Representative, comfortable, inviting: Jon Edwards box-style. Classically elegant, with permanent cover or informal, free-flowing valance, for example, in a light world in country-house style. Single sofas, corner combinations, long chair, meticulously selected materials, Alcantara and the outstanding Interprofil quality leathers complement the range of furnishing possibilities. Jon Edwards is a congenial invitation to guests and owners alike to make themselves comfortable. And what could be more beautiful than relaxing on your sofa at home?
|
|
|
A functional sofa of exquisite design - broad, expansive armrests and an overall appearance of lightness give an impression of a large bird with wings spread out - hence the name “eagle“. A great deal of importance has been attached to the imposing outline of this solitary sofa - an outline which makes this furniture almost appear to float - all the while offering excellent seating comfort. The level of craftsmanship also stands out in this range - chromed metallic frames bear the weight of the cushioned body, which can be crafted to order in exquisite leather or fabric covers.
|
|
Model 2041 Campus
The highlight: a three-stage folding
armrest. In moments, this
elegant 2-seater sofa turns into a
comfortable day bed. Light, airy
construction is made even more
attractive by harmonious proportions
and carefully selected
materials. As a standalone sofa
or part of a suite, this model
satisfies the highest aesthetic and
craftsmanship demands. And for
even greater comfort, it also
comes with a contemporary ottoman
as well as an add-on head
support.
|
|
|
Modular soa with wood structure, upholstered in different density polyurethane foam. Seat cushions in non-deformable polyurethane foam. Completely removable fabric covers. Wood feet finishes: cherry, dark aok, bleached oak, ovengkol or walnut. Available also as sofa-bed with highly resistant steel net and spring mattress 13m H.
|
|
|
Wooden frame padded with stress-resistant polyurethane foam, pre-upholstered with laminated fabric. Suspension by elastics belts. Seat base made with two different polyurethane foam densities, 30kg and 35kg, composed to the wood structure and covered with Dacron fibre.Arms and back in ZMB-25KG polyurethane foam. Back cushions filled 70% goose down and 30% minced fibre, cover in 100% down - proof whitened cotton fabric. Interior covers in cotton fabric. Metal Legs
|
|
|
Created sofa to contribute the maximum comfort, by means of different configurations from the arms, different positions from endorsement and great quality in the materials. Also it provides the maximum functionality, because the back can have a furniture of shelves or a container upholstered with covers. Totally detachable. Pillows of desenfundables seat and endorsement. Hidden mechanism in endorsement pillow that allows four positions in the inclination of the pillow.
|
|
A suite is the focal point of a room. Its charm spreads to its surroundings. Heavy or filigree, bright or discreet colours, the final decision is not easy even for the designer: For this reason Metamorphose was created. The objective was to achieve a degree of practical adaptability, enabling the owner to decice on the final form.His solution was combinable elements and a whole range of individual covers. They can stand individually or in a group, as single pieces or an infinitely expandable seating arrangement. Its clear-cut lines exude a feeling of peace and harmony. Straight, high backs and armrests and firm upholstery give it form and stability. Coushions and bolsters ensure the right levelof comfort. Metamorphose is not classical seating for collective lounging - it is more a stay-awake type of furniture, for holding discussions and reading books.
dimensions: 210 x 80 x 80 cm
|
|
|
|
Contemporary sofas
