|
|
Modular solar collector POLYTUB "M" is especially designed for installations on roofing.
The matter used (Polypropylene) in its manufacture, confers rigidity to him allowing a good behavior and an excellent esthetic aspect.
The originality and the quality of its design allow a fast and simplified installation.
|
|
Solar heating is an economic and ecological solution to double the season of bathe.
Jacques GIORDANO Industries developed, a kit complete of solar heating, ready to even assemble oneself, which is connected directly on filtration external of the pools Except Sol.
|
|
|
|
|
|
Solar Power
The sun is the ideal source of energy to heat water in swimming pools: comfortable, reliable and perpetual. At the same time, the sun also contributes substantially to the reduction in the costs of energy, because less gas is required to heat the water.
Various swimming pool owners have already discovered that the use of solar power gives benefits:
- Lower energy costs because the heating boiler provides no or little additional heating.
- The use of solar power is an environmentally-friendly way of heating the water in swimming pools.
- Extension of the swimming season by two months (in comparison to an unheated open-air pool).
In addition, solar-power systems require little or no maintenance. Opting for a solar-power system therefore means opting for future-orientated and cost-effective technology, without making concessions in terms of comfort.
Solar Collector: heat all of the time!
The most important part of a solar-power system is the collector, which converts sunlight into heat. Collectors can be placed either on the roof or on the ground. Even when the sky is cloudy, the collectors are still able to supply heat. They have, in fact, been built in such a way that they convert light into heat. If the sun shines in abundance, the water will heat up quickly. If it is cloudy, it will take a little longer for the water to reach the required temperature. Collectors supply sufficient heat to, for example, keep an outside pool at a pleasant temperature for almost the whole swimming season, or to contribute to heating the water in an indoor swimming pool throughout the year.
|
|
|
|
|
|
In covered swimming pools, large quantities of water evaporate into the air and if the relative humidity is not maintain artificially in certain levels, this will lead to reducing the comfort in the swimming pool and damaging of the building structure and equipment within it.
For minimizing of this negative influence a need of equipment, creating maximum comfort and related to the latest requirements for high energy efficiency is faced. These are the logical preconditions for developing the swimming pool dehumidification air-handling units type Max. E %u2013 Pool.
Produced in 5 sites:
- Airflow %u2013 3000 %u2013 15000 m3/h
- Dehumidification capacity (VDI 2089) %u2013 19-99 kg/h
- Designed to dehumidify %u2013 the air in covered swimming pools with pool areas follows:
- Private pools %u2013 90-455 m2
- Public pools - 68 %u2013 343 m2
- Additional heating working with: hot water (standart execution) or electric (optional)
- Possibility for mounting on the outside, as well as in a machinery room
- Possibility for remote control (with additional LCD display)
- Refrigerant R 407 C
|
|
|
|
|
|
Starline vinylester filters are available in a number of types: deep bed, side mount, with or without bottom nozzles, depending on legal requirements.
Starline Filters meet European standards and legislative requirements. The filters meet all applicable standards and statutory regulations including the WHVBZ, VLAREM, DIN 19643 and KOK.
The Starline filters are suitable for private use and commercial applications and available in sizes from 400mm width up to 2500mm.
Starline also offers complete filter units with a newly designed silent Starline pump. These filter units can be fitted with a Starline Poolcontrol (230Volt or 400Volt), the complete swimming pool control system. To guarantee crystal-clear water, the filter unit can be expanded with the Starline Ozonator and Ionisator, next to the (optional automatic) multiport 6-way valves.
The complete Starline filter units are available in deep bed and side mount. Their diameters range from 400 mm up to 800 mm. The filter units are supplied ready to use and are pre-plumbed on to an attractively finished stainless steel base. The complete installation is of course pressure- and water tested before leaving the factory.
|
|
Micro-filtration for macro-clarity
FNS Filters® have been designed with curved grids to maximize filtration area. More filter area means better performance and longer periods between cleanings. Our exclusive internal design has been refined to minimize flow restrictions, and therefore requires minimal pumping power to achieve a needed flow rate. That means lower utility costs.
|
|
Features
-Typical Installation – Aboveground pools
-Compact Design – Fits easily in tight installations. Sleek-looking in matte black finish.
-Safe Access – The Posi-Lok™ locking ring is safe and easy to use. Split-tank design permits rinse-in-place cleaning.
-Superior Dirt Loading – Flow-Balanced tank hydraulics direct water through each side of filter module. Uniform dirt-loading prevents clogging
-Easy Reading
–Information panels and top-mounted pressure gauge are positioned for easy reading
-Power Options
–Two pumps available – 1 to 1-1/2 HP
|
|
Clean & Clear® Plus Filters have a corrosion resistant injection molded filter tank featuring superior strength and reliability. The cartridge assembly uses four easy to clean, non-woven, polyester cartridges. Each filter is supplied with a bulkhead union set for easy installation.
An Eco Select™ Choice: Water flows very efficiently through Clean & Clear® Plus Filters filters allowing the use of smaller pumps or lower pump speeds to minimize energy use. And when consumers rinse cartridges rather than backwash, they can significantly reduce water use, too.
|
|
A package deal
The PRC Series Filter Systems Filter Systems, pairing our PRC filter and ABG pump, offers exceptional value and proven durability at an affordable price in small to medium-sized aboveground pools. The system's high-capacity filter holds more dirt than others, which extends the time between cleanings. And, it's even capable of removing suntan lotions and body oils. Plus, each component is engineered to make maintenance easier and less frequent.
|
|
Matched to perfection
For medium to large pools, the combination of our PXC filter and JWP pump features ultra-quiet operation, as well as superior performance. The PXC Series™ Filter Systems features advanced design that extends the time between cleanings. And, maintaining the system is not only fast, it's also very easy. Plus it's capable of removing lotions and body oils.
|
|
| ... products without information |
| |
|
|
Heating for swimming pools
