|
|
Pole 16
16" Diameter Reflector available in Compact Fluorescent, Metal Halide & Incandescent.
-Aluminium 4.35"OD Pole
-9 ft Standard Pole Height( Optional up to 18' Max for Surface Mount & 14' Max for Burial Mount)
-Available in CF42w, MH100w or INC150w( CF & MH units include Ballast & Lamp)
- Includes Glass Globe
-UL Wet Location listed and EPA rated
-10 Premium Finishes
-Optional Decorative Swirl, Wire Guards & Globes
Single Pole Top with 16" Dia. Reflector
%u25A0 9ft Pole Height Standard
(18ft Max for Surface Mounts 14ft Max for Burial Mount)
%u2022 Aluminum 4.5"OD
%u25A0 CF42w,MH70worlNC150w
%u2022 CF & MH units include Lamps
%u25A0 G3 Clear Prismatic Elongated Globe included
%u25A0 Decorative Swirl, Wire Guards & Globes optional
%u25A0 TMS Standard Finishes
|
|
- Available with T4 halogen lamps.
- Precision machined from aluminum, brass, or stainless steel with all stainless steel hardware.
- Frosted tempered glass radial lens creates a smooth, even distribution of light.
- High temperature silicon O-rings used to create a water tight fixture.
- Standard fixed stem lengths from 6" to 48", in increments of 6", covers most applications, while the adjustable stem options give infinite control of fixture height.
- Standard surface mounts, stake and junction mounts, and integral transformer mounts allow for use in virtually any installation.
Available in 14 standard colors as well as several aluminum and bronze metal finishes.
CSA tested & certified to US & Canadian safety standards for wet location landscape use.
|
|
iFace is a fitting that was born to light and enhance surfaces, details, and residential areas.
A ceiling-mounting system in three different sizes %u2013 small, medium, and large %u2013 and a halogen version for decorative lighting effects. Available for pole application, in two different heights with the possibility of single installation of the lighting bodies.
|
|
design Mario Cucinella
Minimal design makes Iteka able to satisfy a wide array of lighting needs in parks, gardens, and avenues. The many applications, be the wall-mountings, ground, or pole-mountings with single or double light body installations, make Iteka ideal for every residential area.
|
|
Bdlove Lamp -2003-
Ross Lovegrove
Base made of Polyethylene (MDPE), of medium density, mass pigmented in different colours; fluorescent red (P-805 U 2X), beige (P-467 U), white (WARMGREY 1U), blue (P-303 U), green (P-373 U), sandstone -sand granite structured-, millstone -dark grey granite structured-, red bermellón (P-200 C), or in costumer colour (minimum 22u.)
Indoors and outdoors use with exception of the red fluorescent.
The part processing system is rotational moulding.
The piece has a seating capacity for three people.
Diffusing panel made of natural Polyethylene (MDPE), with an additive against UV rays.
Electrical equipment, it includes a Halogen High Voltage 100W 230V bulb, 30° opening, E-27 tip. 4 metres of tubing are supplied for connection to the mains supply with SCHUKO European-sized rubber plug of 10 to 16A.
Characteristics:
EUROPE 230V 50Hz
USA / JAPAN 120/125V 60Hz
IP 65
Non-slip stoppers in EPDM (rubber).
The base only can be ballasted with washed sand.
The bases can be stacked, maximum 2 bases.
Bdlove lamp: 141 x 120 x H.300cm.
|
|
Bulk inquiries Only from Architects, Developers and Contractors
Constructed of cast aluminium
Cover of PMMA, satiné
Elec.equip.: 1xE27, HIE-CE 70W
Enclosure class IP65, rate of protection I
Without lamp
Bracket made of aluminium
Overhanging: 300 mm
Colour: your choice in RAL standard or HESS Glimmer
Weight: approx.12 kgs
|
|
PUNT VERD ILLUMINACIO is a family company whose main business activities are concentrated exclusively in articles for garden lighting.
On our catalogue you will find only standard dimensions, but as manufacturers we can offer you the dimensions that your customer requires. We only use national first-quality materials, such as aluminium and stainless steel for our products. Our articles are painted with polyester paint in various colours and they are oven-baked.
The guarantee of our articles is confirmed and ensured by the reputable shops that have put their trust in the brand ALART on the national market during 15 years.
We would also like to draw your attention to the fact that our products are developed and designed by our technical office and that they are entirely manufactured in our factory. Also, before they are brought onto the market, our products are certified to the latest standards and approved by the homologation laboratory, so that we can offer you full guarantees.
|
|
|
Wall-ceiling (only for indoors use). Varnished body and ring in die-cast polished aluminium. Screws in stainless steel and sealed with silicone rubber. The diffuser, available either in moulded sand-glass or shock resistant opaline polycarbonate, is hinged to the body for easier maintenance. Available in three sizes. Diffused light emission. Colour: aluminium grey
|
|
|
The streets of Florence, Tuscany countryside create with the "Lampade da Esterno" Emporio San Firenze, an harmonic blending of lines and materials. The objects are handled with modernity for the best protection fro atmospheric agents, maintaining the aesthetic quality of our products unchanged in time.
|
|
BELPA
Reference: 228632
Category: Outside
Site: Wall
Family: Terminals and brackets
Range: ALPA - BELPA-MYRA
Source: Fluo
Power: 25w
Test with the incandescent wire: 850° IP: 55 Class: 1
Colors available: Gray money
Description: DIFFUSER NOT INCLUDED
|
|
Apollo wall mount
-Wet Location Rated
-Aluminium and Copper Construction
-Includes CF/MH Electronic Ballast 120/277v
-Includes CF/MH Lamp(Incadescent Fixture Lamp not included)
-Also available in Stainless Steel
%u2022CF42w, MH70worlNC150w
%u2022 CF / MH Electronic Ballast 120-277V
%u2022 CF/MH Lamp included
%u2022 Black Accents & Body (F16) Standard
%u2022 TMS Standard Finishes
|
|
Lamp: QR-CB51 20-35-50W
Lamp type : halogen
Lamp base : GU5,3
Light distribution: down
Power supply : 12V
Degree of protection: III
Ip rating : IP43
Material: Aluminium
Glowtest: no
Standard: EN60598-1
Fixation: floor-wall
Mounting: surface mounted
Weight: 0,44 kg
|
|
LED: Type 3 Luxeon High Output LED with Vista exclusive smart-driver, powered to operate for 50,000 hours.
OPTICS: Integral high-efficiency optics available in spot through flood beam spreads.
ELECTRICAL: Input voltage range 6–15V AC, regulated to achieve uniform
illumination throughout the cable run of fixtures. Integral surge and reverse polarity protection.
|
|
Other than for fireplaces,
stone, wood and metal are excellent for bathroom, kitchen, bar, etc...
Waco & C° realises any application you can imagine:
washstand, showercabine, furniture, garden ornaments, tables ...
|
|
WHEN IT GETS DARK, TURN ON THE CHARM
Now you can have romantic, flickering ambience at the flip of a switch. The Fire Stone Patio Lantern sets up in minutes because there's no expensive gas piping to install. A one-pound LP gas tank hidden in the base gives you the beauty and charm of real gaslight for up to 20 hours. Innovative elegance - just what you'd expect from Fire Stone. Specifications
French Colonial Lantern
Turn on the charm with the flip of a switch.
Romantic ambience meets state-of-the-art electronics. The Fire Stone French Colonial Gas Lantern sets up in minutes because there's no expensive gas piping to install.
|
|
|
Made in white polyethynlene. 1 low-energy consump (MAX 1x24W) E27 bulbs. Size 50x40x40 cm. In & out use.
|
|
ABC policy : A
lamptype : compact fluorescent
sockettype : E27
ILCOS code : FBT E27
ZVEI code : TC-TSE
number of lamps : 1
wattage (W) : 23
light diffusion : direct
input voltage : 230V
installment : surface
mounting : floor
dimensions (mm) : L300/B300/H410
weight (kg) : 15 7
class : I
application : Exterior lighting
standard : CE
protection level : IP55
F-standard : yes
safety distance : 0.5 m
|
|
|
Stone (Design by Josep Puig + Josep Novell) is an outside portable lamp with a diffuser produced in rotomoulded polyethilene and housing a T5 tube of high performance (55W). It's great dimensions (80x55cm) and organic shape makes it perfect to use in big and not so big spaces, giving a very smooth and shadow free light. It can be combined making groups of rolling stones ,,, or just standing alone in the middel of a garden. It's supplied with 4m on neoprene black cable.
|
|
Description:
Recessed fixtures with an elegant design, ideal for lighting environments to create suggestive settings with light. Thanks to its high protection level (IP67) this fixture can be used both indoors and outdoors. The whole range of products can be used in shops, cinemas and places of recreation/entertainment in general, leaving the designer free to play with the light, to blend in perfectly with the architecture.
Emissions:Direct
Power supply:
The light used inside it is the fluorescent type and the whole electromagnetic control gear circuit is housed inside.
Body:
This fixture is designed to be installed on architectural walls, characterised by the fact it is exactly the same size as an ordinary brick. Body in die-cast aluminium with antioxidant electroplating treatment, the bottom sealing glass is in sanded or transparent Pyrex® while the top glass is tempered with a partly sanded finish, 10 mm thick. The visible bezel is made in sandblasted stainless steel with a silicone seal. To guarantee the IP67 protection level, Walkie Talkie utilises a neoprene power cable (preassembled, 30 cm long) locked by a PG11 fairlead with resin finish inside; the sealed connecting system is supplied.
Colours:
Sanded glass.
|
|
- Available with an LED or MR16 halogen lamp. 1 Lamp info: LED, MR16.
- Heavy walled cast aluminum or bronze faceplate with all stainless steel hardware.
- Faceplate holds up to two lens accessories.
- For round junction box mount applications in non-combustible materials.
- Requires remote transformer.
Available in 14 standard colors as well as several aluminum and brass metal finishes.
CSA tested & certified to US & Canadian safety standards for wet location wall mount use.
|
|
|
Beautiful merging of historical genius and contemporary expression; their pyramidal shape, carved in a pure material such as glass, makes these 3D lamps stunningly original. Carved out and milled manually by glass masters, these built-in lamps expand in three dimensions like a diamond in its caset.
|
|
|
Beautiful merging of historical genius and contemporary expression; their pyramidal shape, carved in a pure material such as glass, makes these 3D lamps stunningly original. Carved out and milled manually by glass masters, these built-in lamps expand in three dimensions like a diamond in its caset.
|
|
Beautiful merging of historical genius and contemporary expression; their pyramidal shape, carved in a pure material such as glass, makes these 3D lamps stunningly original. Carved out and milled manually by glass masters, these built-in lamps expand in three dimensions like a diamond in its caset.
'
|
|
ADJUST SQUARES GU10
Reference: 228214
Category: Outside
Site: Ground, Wall
Family: Embedded
Source: GU10
Power: 35w
Test with the incandescent wire: 850° IP: 67 Class: 1
Colors available: Stainless, clear Glass
Description: LID STAINLESS DELIVERS WITH POT EMBEDDING TEMPERATURE SURFACES 133°POUR GU10 35W RESISTANCE TO the LOAD 5 TONS
|
|
HOUSING: Compression-molded, fiber-reinforced polymer, specially formulated to add strength and exceptional UV stability %u2013 warranted for ten years against corrosion.
LENS COVER: Injection-molded, fiber-reinforced polymer fitted to the housing with a C-curved crosssection gasket %u2014 surrounding the edge of the lens to provide a superior dual weather-tight seal. The lens cover is also available in precision CNC-machined solid brass or stainless steel.
CONSTRUCTION: Fixtures are ruggedly constructed and have an International Protection rating of IP67, for protection against detrimental dust intrusion as well as penetration of water under submersion. Additionally, models 1103 and 1105 are drive-over rated for 3,000 lbs., allowing for drive-over strength in excess of normal vehicle weight requirements.
FINISH: Polyester powder-coated finish available in Black, Verde, Architectural Brick, Architectural Bronze, Granite, Pewter, Terracotta, Rust, Hunter Green, Mocha, Weathered Bronze, Weathered Iron, and White. Natural Brass or Stainless Steel lens cover also available. Housing available in black only.
|
|
|
Set of lamps stick from outside. Ideal in order to evidence the more evocative spaces of your garden or in order to trace covered of light. LED has cold light, in steel and glass
|
|
|
Lamp LED from garden with stake in plastic to bury. Ideal in order to create evocative distances in garden, edge road.
|
|
|
It is gone luminous fortified of LED RGB with the possibility to have 3 tipologie of luminous shows thanks to the remote control supplied with the vase.
|
|
|
|
Garden lighting
