Ground source heat pumps (GSHP)

74 companies | 272 products
Filters
  • What’s new?
    Submit

PROHEAT heat pump air/water is suitable for outdoor pools....

{{productDetail[10970]}}

Having an evaporator coil matched to your outdoor unit is critical to getting the most out of your...

Having an evaporator coil matched to your outdoor unit is critical to getting the most out of your...

GT-PX is our highest rated geothermal series designed to deliver total-home comfort all year round.

This...

GT-PX is our highest rated geothermal series designed to deliver total-home comfort all year round.
This...

GT-PX is our highest rated geothermal series designed to deliver total-home comfort all year round....

{{productDetail[372]}}

Water-Cooled Heat Pump
Modular Indoor Self-Contained Units
Constant Volume
30 to 60 Nominal Tons

The 50BVV indoor water-cooled packaged heat pumps are designed for vertical installation, a variety of airflow configurations, and heating/cooling operation. The modularity...

Indoor, Water-Cooled
Two-Stage Water Source Heat Pump
with Puron® Refrigerant (R-410A)

2 to 5½ Tons

50PTH - Horizontal
50PTV - Vertical
50PTD - Downflow

The 50PT indoor water-cooled heat pump unit is designed for vertical, horizontal,...

Constant Volume
Water-Cooled, Compact Water Source Heat Pump
with Puron® Refrigerant (R-410A)
1¼ to 5 Nominal Tons

50PCH - Horizontal
50PCV - Vertical



The 50PC indoor water-cooled heat pump unit with Puron refrigerant is designed for vertical or...

Indoor, Water-Cooled
Horizontal Large Capacity
Water Source Heat Pump
with Puron® Refrigerant (R-410A)

6 to 10 Nominal Tons

The 50HQP large capacity, indoor water-cooled heat pump units are designed for horizontal installation with a variety of airflow configurations....

Indoor, Water-Cooled
Two-Stage Water Source Heat Pump
with Puron® Refrigerant (R-410A)

2 to 5½ Tons

50PTH - Horizontal
50PTV - Vertical
50PTD - Downflow



The 50PT indoor water-cooled heat pump unit is designed for vertical, horizontal, or downflow installation with a variety of airflow configuations. These units...

{{productDetail[49317]}}

Floor standing air to water heat pump for heating, cooling and hot water with thermal solar support

Integrated...

Integrated indoor unit: all-in-one floor standing unit including the domestic hot water tank
Energy...

Ground source heat pump technology uses stable geothermal energy, unaffected by the outside temperature
Highest seasonal efficiency...

Single phase floor standing indoor unit up to 16kW
Low energy bills and low CO2 emissions
Energy...

{{productDetail[423]}}

The DHP-H Opti has speed control, which means that its performance can be continuously adjusted to the prevailing requirements and conditions....

The DHP-H Opti has speed control, which means that its performance can be continuously adjusted to the prevailing requirements and conditions....

Danfoss DHP-H is a very high performance heat pump, because it is extremely...

Heating in the winter, cooling in the summer and hot water all...

The DHP-L Opti Pro+ has speed control, which means that its performance can be continuously adjusted...

{{productDetail[426]}}

Installation location: Indoors
Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). Integrated brine components enable direct connection...

Installation location: Indoors
Heating heat pump in compact design for indoor installation with 170 litres stainless steel domestic hot water cylinder and control WPM Econ5Plus. Variable connection options for brine and heating connections on the back board of the casing. Integrated solid-borne sound insulation for direct connection to the heating system. Removable heat pump module...

Installation location: Indoors
Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set...

Installation location: Indoors
Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). Variable connection options for brine and heating connections...

Installation location: Indoors
Heat pump for heating purposes for indoor installation with integrated WPM 2007 plus controller. The control panel is integrated into a brown-red design screen and can also be used as wired remote control using the wall mounting set (special accessories MS PGD). Variable connection options for brine...

{{productDetail[53187]}}

A traditional central-air system made better with Daikin Constant Comfort inverter technology.
The Daikin Inverter Ducted line is a cost-effective alternative to traditional gas furnace/AC systems. The Inverter Ducted can be used in place of your old furnace, utilizing existing ductwork, or in new construction where individual...

Daikin Altherma is the home heating solution that connects to underfloor heating, low temperature radiators and fan coil units. Daikin has more than 50 years of experience in the production of air source heat pump systems, manufacturing over a million units a year for residential...

Daikin's Heat Pump SkyAir system provides comfortable heating and cooling in a one-to-one application. With the ability to...

Daikin's current VRV system is the 7th iteration of the first VRV launched in 1982. Completely re-engineered to realize opportunities for VRV in taller / larger buildings, it utilizes the latest advances in refrigeration and air-conditioning technology. The totally new Daikin Inverter compressor system delivers improved efficiency and performance, while ensuring satisfaction of demands throughout...

{{productDetail[81620]}}

Your initial investment is quickly recouped in the form of minimal running costs.
Installing a JD Pac heat pump ensures your comfort and wellness using technology...

{{productDetail[9229]}}

Ideal for detached houses and apartment building

The new single stage Vitocal 350-G heat pump reaches a high flow temperature of 72°C. This makes it particularly suitable for convenient DHW heating in both modern buildings and retrofits.
The Vitocal 350-G is available as either a brine/ water or water/water heat pump. For higher heat demands in two-stage...

Powerful, quiet and reliable

The heart of the Vitocal 300-G is its powerful Compliant scroll compressor. It proves its worth through excellent reliability, safety and particularly quiet operation, thanks, in part, to the hermetic seal and dual anti-vibration mounts. At the same time, the Compliant scroll compressor ensures the highest performance...

Are you looking to install an environmentally friendly heating system?

The Vitocal 200-G makes the utilisation of renewables very attractive - particularly for family housing, as its output can be matched to the respective demand.

Reduce your heating bills

An investment in a Viessmann heat pump such as the Vitocal 200-G...

Natural heat for modern family homes

The Vitocal 242-G and Vitocal 222-G compact heat pumps are specifically designed for family homes. With their modest dimensions of around 0.4 m2 they take up hardly any space. With integral DHW cylinder, brine and heating circuit pumps plus a three-way diverter valve, these compact appliances are quick...

Lower output now two-stage
The previous lower output sizes that were single stage are now available as two-stage versions. The improved characteristics under partial load conditions and higher efficiency are also safeguarded in the output category up to 145 kW.

Higher output as cascade

The...

{{productDetail[789]}}

The compact energy centre Zehnder ComfoBox combines the complex building services (heating, cooling, ventilation, hot water generation) in one unit. The Zehnder...

{{productDetail[60528]}}
{{productDetail[51856]}}

Kita S is the most compact and suitable version to meet needs of residential and tertiary sectors.Equipped with an inverter Twin Rotary compressor, heating, cooling and domestic hot water until 60°C.

Standard equipment

Power supply monophase 230V-50Hz​
Twin Rotary compressor
Hydronic group...

Air-to-water reversible heat pump KITA SPLIT.

The air-to-water split version KITA heat pump is the best solution for heating, cooling and DHW production thanks to the natural energy of the air.
Equipped with full inverter BLDC motors, KITA heat pump meets the thermal power request in every moment and ensures the best performances.


KITA...

Kita M is the most compact and suitable version to meet needs of residential and tertiary sectors.Equipped with an inverter Twin Rotary compressor, heating, cooling and domestic hot water until 60°C.

Standard equipment
Power supply monophase 230V-50Hz​
Twin Rotary compressor
Hydronic...

Kita L represents the intermediate version ad its useful for the residential market and the industrial one with low needs.

This unit has a 3-phase supply and a BLDC scroll compressor with vapor injection that ensures Kita to work to -30°C of the external temperature.

Kita L works in heating, cooling and produces domestic hot water with a maximum temperature...

Kita L42 represents the intermediate version ad its useful for the residential market and the industrial one with low needs.

This unit has a 3-phase supply and a BLDC scroll compressor with vapor injection that ensures Kita to work to -30°C of the external temperature.

Kita L42 works in heating, cooling and produces domestic hot water with a maximum...

{{productDetail[125673]}}

The MTD2 water-cooled heat pumps are reversible units for heating, cooling and domestic hot water by external three-way valve (accessory). Both the MTD2 heat pumps are suitable for traditional heating systems and radiant panels. The reversible heat pumps, working with water at lower temperatures, ensure a higher yield and are particularly suitable in new buildings with low energy consumption that...

Water-cooled indoor unit for the production of chilled water with hermetic rotary Scroll compressors, braze-welded plate-type exchanger and thermal expansion valve. External panels in pre-clad sheet steel (simil-Peraluman) and structure in galvanised steel with paint finish. The range includes the single-circuit two-compressor versions and the dual circuit four-compressor...

Indoor unit for the production of chilled water with semi-hermetic screw compressors optimized for R134a, thermostatic expansion valve, shell and tube condenser and evaporator. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness....

Indoor unit for the production of chilled water featuring centrifugal compressors oil-free, with R134a, electronic regulation valve, shell and tube condenser and shell and tube flooded evaporator. Base and supporting structure and panels are of galvanized epoxy powder coated steel with increased thickness. Flexible and reliable unit; it easily adapts itself to different thermal load conditions thanks...

Unit for indoor installation for chilled water production. Semihermetic screw compressors optimized to operate with low compression ratio and R134a; shell and tubes condenser and direct expansion evaporator; electronic expansion valve. Frame in polyester-painted galvanized...

{{productDetail[59392]}}

Reversible heat pump
Water cooled
Indoor installation
Capacity from 3,0 to 15,6 kW
GAIA Acqua is the innovative annual cycle heat pump, which generates
comfort and uses from 75% to 100% renewable energy, recovering it from the water or ground depending on the system adopted.
Its main features are:
-SYSTEM MACHINE - it can be used with radiant panel systems,...

WSHN-EE: reversible heat pump
WSH-EE: cooling only
Water cooled
Indoor installation
Capacity from 7,05 to 41,6 kW

Geothermal energy from the ground or ground...

Monobloc unit
Simultaneous and independent heating and cooling
Water cooled
Indoor installation
Capacity from 173 to 500 kW
SPINSAVER is a new concept of unit for simultaneous and independent production of heating and cooling energy for application with "4-pipes" systems. Below the main features:
- High efficiency, especially at part load, obtained by SPINCHILLER...

High efficiency heat pump
Water cooled
Indoor installation
Capacity from 34 to 280 kW
ELFOEnergy Ground Medium is a water cooled heat pump for indoor installation, ideal for multi-family and commercial buildings.
The main features are:

•HIGH SEASONALEFFICIENCY - The combination of different size compressors...

{{productDetail[51494]}}

On an installation made of radiators and / or heating and the additional costs incurred floor TEAMO offers a complete effective and sustainable solution to 4 COP specifically...

{{productDetail[501]}}
{{productDetail[53034]}}

Following the strategy to get more eco-friendly and energy-saving products, Pentairs R&D...

{{productDetail[105439]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation