Mechanical ventilation: exhaust fans

117 companies | 2112 products
Filters
  • What’s new?
    Submit

The Dryflow 'A' series is a range of Axial Extract Fans for use...

The Dryflow 'C' series is a range of Centrifugal Extract Fans for...

The Dryflow 'S' series is a range of Slimline Axial Extract Fans for use in kitchens, bathrooms,...

{{productDetail[70004]}}

The Camino swirl floor diffusers are designed for use in raised access floor air distribution systems, where the floor cavity is used as a pressurized supply air plenum. The low velocity swirl discharge pattern produces high room air induction rates and superior occupant comfort.

Features:

...



The Camino swirl floor diffusers with actuators are designed for use in raised access floor air distribution systems, where the floor cavity is used as a pressurized supply air plenum.
An integral modulating actuator provides variable air volume control in cooling applications for precise...

The Camino linear floor diffusers with actuators are designed for use in raised access floor air distribution systems, where the floor cavity is used as a pressurized supply air plenum.

High quality, heavy duty, aluminum linear grilles are featured providing an architectural appealing face...

The Camino linear floor diffusers with actuators are designed for use in raised access floor air distribution systems, where the floor cavity is used as a pressurized supply air plenum.

High quality, heavy duty, aluminum linear grilles are featured providing an architectural appealing face...

{{productDetail[58130]}}

Underfloor Air Distribution (UFAD) offers better inidividual comfor to occupants,...

{{productDetail[58129]}}

Circular optimized fire damper with a minimum fire resistance of 60 minutes (see the classification overview).
Its thin blade, the fusible link aligned with the blade, and the transmission located outside...

Optimized circular fire damper with a fire resistance up to 120 minutes (see the classification overview).
Its thin blade, the fusible link aligned with the blade, and the transmission located outside the tunnel guarantee...

Circular fire damper available in the largest dimensions (up to a diameter of 630 mm) with a fire resistance up to 120 minutes, depending on the wall type (see the classification overview). Its refractory tunnel...

Optimized rectangular fire damper with a fire resistance up to 120 minutes (see the classification overview).
Its thin blade, the fusible link aligned with the blade, and the transmission located outside the tunnel stand for a minimum...

Optimized rectangular wall-mounted fire damper with a fire resistance up to 120 minutes (see the classification overview). CU-LT-1s combines the energy efficiency of our range of optimized dampers (minimum pressure loss, small dimensions) with the ease and speed of a dry assembly.
Easy to mount and light in weight, CU-LT-1s is the ideal solution...

{{productDetail[85792]}}

Attic ventilation has proven to be helpful in conserving energy. With the...

{{productDetail[49479]}}

KEY FEATURES

Air volume from 100 to 7000 m³/h
Multi-purpose application
Speed controllable
Extremely silent operation

Product Description

DD/DS-centrifugal fans are double or single...

KEY FEATURES

Air volume from 350 to 4500 m³/h
Energy saving
Speed controllable
Extremely silent operation

Energy Saving

With these new generation DDEC high efficiency...

KEY FEATURES

Air volume from 1,000 to 10,000m³/h
Direct driven centrifugal fans
Motors outside the air stream
Forward and backward curved impellers
Speed controllable

Product...

KEY FEATURES

Air volume from 1.000 to 100.000m³/h
Single or double inlet
Forward and backward curved impellers
Indirect driven centrifugal fans
Speed controllable

Product Description

IMOFA, a partner of Thermo Air,...

KEY FEATURES

Air volume from 10.000 to 70.000m³/h
Direct driven fans
Axial fans
Speed controllable

Product Description

IMOFA, a partner of Thermo Air, has been designing and producing...

{{productDetail[119787]}}

Remote condenser assembled in a galvanized steel supporting frame including: condensing coil with copper pipes mechanically expanded into aluminium fins, axial fan with rotating stator blades. Refrigerant welding type connections. The standard...

{{productDetail[889]}}

Ubbink's UB30 WEP is a pre-shaped flashing unit...

UB41 is a universal service terminal for use in all tile and slate pitched roofs. The unit comprises of a streamlined...

Ubbink's UB37 terminal is an in-plane pitched roof terminal for use in small plain non-interlocking...

Ubbink's UB39 vepac terminal is an in-plane service terminal for use in slate roofs for pitches of 25o...

UB34 and UB35's are specially designed for systems requiring a low resistance terminal and for roof pitches of 25o...

{{productDetail[70319]}}

Description:
High induction swirl diffuser with a circular or square front plate, pressed air control blades and integrated fixed steel discharge diffusor, rigid design, white coated (RAL 9010).

Type of connection...

Diffuser in circular form, integrated in a square...

High induction swirl diffuser with a round or square front plate. It consists of fixed air conducting elements arranged in a...

Square swirl diffuser with adjustable air control elements in a circular arrangement. Blades form-fitted to avoid unauthorised adjustment as per DIN 1946, part 4.

Steel front plate,...

Adjustable square swirl diffuser (black or white) with galvanised sheet-steel front plate, powder-coated RAL 9010 white.

Plenum box out of galvanised sheet-steel...

{{productDetail[72918]}}

With a slim profile of only 18mm, Silhouette blends in with the wall...

The Building Regulations Approved Document F gives examples of four main methods of ventilation. System 3, Continuous mechanical extract ventilation can be achieved using a single centralised extract unit such as the Sentinel Multivent ducted to wet rooms (kitchen, bathroom, en-suite...

The Building Regulations Approved Document F gives examples of four main methods of ventilation. System 3, Continuous mechanical extract ventilation can be achieved using a single centralised extract unit such as the Sentinel Multivent ducted to wet rooms (kitchen, bathroom, en-suite and WC) or by decentralised individual fans, such as the Lo-Carbon Centra in the wet rooms....

Long Life Ventilation

The Vent-Axia Lo-Carbon HR25 range of through the-wall heat recovery units are suitable for fitting through a 152mm (6) circular hole and are designed for use in bathrooms. Available in 2 lengths, a standard version suitable for wall...

Through-The-Wall Mounted Heat Recovery Unit

The Vent-Axia Lo-Carbon HR25 Solo Plus through-the-wall heat recovery units are suitable for fitting through a 152mm (6) circular hole and are designed for use in bathrooms, toilets and utility...

{{productDetail[73609]}}

Hybrid ventilation, more energy efficient than ever

With only 35 W at 800 m3/h*, the VBP+ hybrid ventilation fan offers an exceptional energy efficiency, reducing the electrical consumption due to ventilation to the minimum.

Moreover, its hybrid working** (natural or mechanical mode) enables to automatically adapt to weather conditions to maintain...

The VCZ attic exhaust fan is available in four models, providing airflow capacities from 500 m3/h to 2.660 m3/h, for the ventilation...

The VTZ fans range offers four models with capacities going from 500 m3/h up to 2.750 m3/h for the equipment of collective dwellings,...

Discretion and comfort in sanitary installations

With its silent operation and compact construction, the V2A can...

Silent operation and efficient ventilation for the whole dwelling

The V4A fan has been designed to ventilate a complete dwelling, with up to four extract units located in the kitchen, toilet(s) and bathroom(s). Easily...

{{productDetail[69621]}}

Typical Airflow Range: 40-70 cfm
Optimally sized for the small residential home, apartment or condominium...

Typical Airflow Range: 40-110 cfm
Optimally sized for the small residential home, apartment or condominium ( up to 2000 sq. ft.)
115V...

Typical Airflow Range: 40-110 cfm
Optimally sized for the small residential home, apartment...

Typical Airflow Range: 50-140 cfm
Optimally sized for the average residential home (up to 2700 sq. ft.)
Flagship model - used in more homes, more applications...

Typical Airflow Range: 50-140 cfm
Optimally sized for the average residential home (up to 2700...

{{productDetail[10190]}}

Plastic housing with cleaning safety cover
Metal connection sockets DN75
...

Plastic cover consisting of two parts
Colour of the cover: Pure white RAL9010
...

Fresh air means more quality of life. It
ensures that people feel well in their homes.
Increased concentrations of CO2 can lead
to fatigue, headaches, lack of concentration
and decrease in performance. Vapours from
cleaning agents, building materials, carpets,
furniture, etc. contaminate the air we breathe
with additional pollutants....

Ventilation unit with heat recovery, casing made of white and shock-resistant ABS synthetic material, cross-flow aluminum heat-exchange core, electronic...

Ventilation unit with heat recovery, ten levels of air volume settings (15-100 m³/h). Casing made of white and shock-resistant ABS synthetic material, cross-flow aluminum plate heat-exchanger...

{{productDetail[73233]}}

Plastic ceiling-mounted air diffusers suitable for use as air inlets and for the distribution of fresh air in stables and other rooms requiring ventilation
Counterbalanced...

Plastic ceiling-mounted air diffusers suitable for use as air inlets and for the distribution of fresh air in stables and other rooms requiring ventilation
Counterbalanced...

Basic construction like Type QD 1 / Type QD 2
Type TQD 1, TQD 2:
Air-deflecting plate with round opening...

Basic construction like Type QD 1 / Type QD 2
Type TQD 1, TQD 2:
Air-deflecting plate with round opening...

Ceiling diffusers with a Rotomix Fan guarantee an optimal room interior climate by means of a controlled air flow and a regular air circulation without draught
Rotomix Fans mix a constant volume of warm...

{{productDetail[74211]}}

Complete roof-vent with profiled pass-through, installed directly on metal tiles.

catalogue no.: K48
sheet: metal tile
type: non-insulated
adjustable angle: 5º...

Complete roof-vent with profiled pass-through, installed directly on metal tiles. Insulated type, which prevents from condensation of water-vapour in the air-duct noticeable during winter.

catalogue no.:...

Complete roof-vent with profiled pass-through, installed directly on metal tiles. Electric fan type, which is designed for forced air exhaustion from blocks of flats (kitchens, toilets) and public utility...

Complete roof-vent with profiled pass-through, installed directly on metal tiles and profiled sheets.

catalogue no.: K25
sheet: profiled sheets
type: non-insulated
adjustable...

Complete roof-vent with profiled pass-through, installed directly on metal tiles or profiled sheets. Insulated type, which prevents from condensation of water-vapour in the air-duct during winter.

catalogue no.:...

{{productDetail[125323]}}

The Premier range of centrifugal pressure developing fans is designed for bathroom, toilet and utility room installations where longer duct runs are required. They are also suitable for many commercial applications such as hotel rooms, office toilets and commercial wet rooms.

All Premier models have a gloss white casing with...

The Safety Extra Low Voltage (SELV) versions of the Premier DX200T and CF20 pressure developing centrifugal fans are ideal for use in shower rooms, bathrooms with showers and other...

Premier Ultra DC2 fans are supplied with a separate remote mounted LV transformer, whilst the DC3 models have their own integral power supply built in the fan.

Both ranges feature long life, low energy use motors and are suitable for through the wall or ducted applications in bathrooms, toilets...

A comprehensive range of sylish, compact and easy to install 100mm (4") single speed extractor fans. Suitable for a wide range of applications including bathrooms, shower rooms and toilets, including zones 1 and 2.

All DX100 extractor fans (except the CP clamp packed model)...

A comprehensive range of sylish, compact and easy to install 100mm (4") single speed extractor fans. Suitable for a wide range of applications including bathrooms, shower rooms and toilets, including zones 1 and 2.

All DX100 extractor fans (except the CP clamp packed model)...

{{productDetail[9806]}}

The ZT swirl floor diffuser is designed for use in raised access floor air distribution
systems, where the floor cavity is...

{{productDetail[58399]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation