|
|
Coupled a solar panel for a true economy has.
eco' pacsolaire proposes l%u2019option to profit to you from the medical d%u2019eau production hot, jusqu%u2019à 60° C, with a great energy efficiency and without CO ² emission in l%u2019atmosphère. In addition to the ecological and economic benefit, the system has also a reliability proven by thousands of systems already installed. L%u2019entretien is practically non-existent, guaranteeing to l%u2019utilisator an absolute peace. The revolutionary principle, l%u2019application d%u2019une top-of-the-range technology and mainly its economy compared to the traditional solar systems, make the solar system thermodynamic the last solar generation in heating of l%u2019eau.
|
|
|
Connected to one of CIAT's compatible heat pumps, the SANI300L guarantees the entire production of domestic hot water. It meets the needs of the whole family and keeps its budget low. This powerful dual energy water heater has been designed to operate with a heat pump and supply a constant temperature whatever the outdoor conditions.
|
|
Warm water preparer, the UPEC is a stainless balloon of 120 liters with a powerful exchanger for the requirements out of warm water important.
It is intended to be coupled on the Murales boilers or Ground, mixed or heating alone.
|
|
|
The High Capacity offers an environmentally sound and highly efficient thermal insulation, with a unique coil design to allow a full quantity of water to be heated.
|
|
All ACV water heaters use the exclusive Tank-in-Tank technology with a stainless steel inner tank that functions as a heat exchanger. Thanks to their large heat exchange surface area, our water heaters are able to heat up large quantities of water to high temperatures very rapidly. It is the ideal choice for hotels, hospitals, sport clubs as well as all tertiary applications that require large quantities of hot water.
|
|
|
KWB also offers, alongside pellet, wood chip and log-wood heating systems, an extensive hot water storage system sortiment to be able to offer the customer solutions from one provider. KWB hot water storage tanks stand for the highest quality and are perfectly suited to fulfilling the customers’ requirements.
|
|
The Sofath domestic hot water cylinder: Low cost hot water
Domestic hot water can be produced from the space heating system by saving energy directly from the compressor. The Sofath water cylinder is equipped with an external heat exchanger. Connected to your heating installation or as independent unit, it will give you hot water when ever you want.
|
|
A range of six stainless steel unvented cylinders.
Finished with a stylish casing they are available in a range of sizes from 125 litres to 310 litres. uniSTOR can be used with any proprietary boilers. However when installed with Vaillant ecoTEC plus system boilers, a complete total heating and hot water solution is provided.
Giving the advantage of a completely harmonised installation all supplied from one manufacturer. uniSTOR features a high recovery heating coil and insulation which exceeds CHeSS Best Practice. All the seams are laser welded and the cylinder shell is backed up by a transferable 25 year warranty.
|
|
This twin coil unvented solar cylinder manufactured from stainless steel has a 25 year warranty on the shell. Each cylinder features two sensor pockets for simple straightforward connection of the control sensors and a 22kW rated coil for a rapid heat up.
Insulation exceeds CHeSS best practice and heat loss is as low as 0.08kW/h.
|
|
|
Thanks to the Tank-in-Tank technology, ACV combined water heaters are high performance water heaters that can also provide heating. These units are selected by our customers in more than 40 countries situated at all latitudes, from Siberia (outside temperatures as low as – -65°C) to Mexico and the Persian Gulf (outside temperatures over 50°C).
|
|
|
|
|
|
BSP stratification cylinder with freshwater station
-Space-saving stratification cylinder with 800 or 1000 litres capacity
-The hydraulic components such as the fresh water module, 2 mixer circuits and the solar pump/valves group can be mounted either on the tank or on the wall
-Stratification plates stabilize the temperature zones inside the tank and distinctly improve the solar heat gain
-The high performance freshwater module (30 l/min) guarantees fully hygienic hot water preparation
-Minimum heat losses thanks to single tank system
-The circulation set can be added if required
-Optionally available with two mixer circuit groups for high and low temperature circuits
-Thermal insulation is CFC free
-The thermal insulation can be completely removed for easy transport
-Ideal for combination with solar collectors and other heat generators to create a -Wolf solar heating system
-Freestanding steel cylinder SE-2
Benefits of the Wolf SE-2:
-Inspection and cleaning apertures for easy maintenance
-Highly-effective thermal insulation and low thermal losses through hard PU foam insulation below the cylinder casing
-Casing: silver foil casing
-The cylinder interior is corrosion-protected by a two-layer enamel coating and a protective magnesium anodes (SE-2-750 with impressed current anode)
-Low indirect coil, two-layer enamel coating for short heat-up times and high constant DHW output
-Connection for an electric immersion heater
-Cylinder capacity: from 150 l to 750 l
-5 year warranty on the freestanding cylinder
-2 year warranty on all electrical and moving parts
|
|
Luna - storage water heaters are more than easy to install - only cold water supplies and a simple electric socket needed. It is a perfect device if you need small amounts of hot water at a time in places like kitchens, toilets, garages.
Pressure 5 Litre water heater - POC Luna INOX
stainless steel container
connectable to any tap (POC.G or POC.D)
Non-pressure 10 Litre water heater - POW Luna
with a tap included in a set (POC.Gb or POC.Db)
- available in above and under sink versions,
- excellent thermal insulation,
- fast heating as a 2kW heating element is used,
- temperature adjustment from 23 C to 70 C,
- anti-freeze temperature setting so you can install it in a cold place.
|
|
|
|
|
|
The speciality of the OGB SLIM generation is its original elliptic design as well as smaller external dimensions. The width of the heater is only 420 mm, so installation is possible where space is at a premium. Internally, all the recognised characteristics of the GB family are retained, including the air-heating elements, inserted into a metallic protective tube inside the heating flange. Thus, heating elements are not in direct contact with water, which means less problems with sedimentation and simpler maintenance and service.
The tank is manufactured from high-quality steel sheet, protected against corrosion by enamel and by a protective magnesium anode.
The OGB SLIM heater is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
- Top Class Slim Long Life model
- new elliptic shape
- high quality insulation
- compact dimensions (space savings)
- arbitrary water temperature setting to 75°C
- additional functions:
- thermometer for displaying water temperature inside the heater
- display of electrical heating element operation
- temperature setting options:
- economical temperature and
- protection against freezing
- indirect tubular air-heating elements
- simpler maintenance and service
- 2 year general warranty, 7 year warranty for the tank
|
|
These heaters are eminently suitable for facilities where an instant need for a small quantity of hot water may arise, such as in kitchens, guest rooms, washrooms and workshops. The water is heated at the point where it is needed, therefore conduit pipes are short, and thermal losses are low.
The heaters are manufactured with dimensions that make them suitable for mounting inside fitted upper cabinets or lower cupboards. The tank is manufactured from hygienically impeccable plastic material (polypropylene).
- non-pressurised, open heater (for supply of only one outlet)
- overbasin and underbasin design
- arbitrary water temperature setting to 75°C
- 2 year general warranty, 7 year warranty for the tank
|
|
|
|
|
|
OTG SLIM is a completely new type of a water heater. Besides the original elliptic design it is distinguished also by smaller external dimensions. The width of the heater is only 420 mm which enables installation where space is at a premium.
As is the case with all Gorenje tanks, this model is manufactured from carefully enamelled high-quality steel sheet. Additional protection against corrosion is provided by means of a magnesium protective anode. The OTG SLIM heater is intended exclusively for vertical wall mounting.
The new design of the heating flange with a larger opening facilitates cleaning and maintenance. With an appropriate mixer tap, it can also be used in a non-pressurised system.
- Top Class Slim model
- new elliptic shape
- high-quality thermal insulation
- compact dimensions (space savings)
- arbitrary water temperature setting to 75°C
- additional functions:
- thermometer for displaying water temperature inside the heater
- display of electrical heating element operation
- temperature setting options:
- economical temperature and
- protection against freezing
- 2 year general warranty, 5 year warranty for the tank
|
|
These heaters are recommended in instances where at least two water outlets are to be supplied with hot water. They are particularly suitable when renovating older buildings as well as for washrooms, kitchens, laboratories, service workshops and garages. Properly connected and utilising a mixer tap, the GT can be used in a nonpressurised system to feed a single outlet.
The tank is manufactured from steel sheet coated with high-quality anti-corrosion enamel in combination with a protective magnesium anode.
The new design of the heating flange with a larger opening facilitates cleaning and maintenance.
- pressurised, closed heater (simultaneous supply of two or more outlets)
- overbasin and underbasin design
- arbitrary water temperature setting to 75°C
- display of electrical heating element operation
- when connected as pressurised, use of safety valve is mandatory
- 2 year general warranty, 3 year warranty for the tank
|
|
|
|
|
|
The GBU generation of heaters has been developed within the GB family and contains all its outstanding features; additionally %u2013 due to its universal design %u2013 it also offers the possibility of vertical and horizontal wall mounting (with connection tubes on the left side).
An air heating element is inserted into a protective metallic tube within the heating flange. It allows for the maximum degree of protection of the enamelled tank surface in combination with a magnesium anode, reduces sedimentation and facilitates maintenance. The GBU heater is intended for the supply of a single outlet or for the central supply of hot water to numerous outlets from a single heater.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
- Standard Long Life model
-vertical or horizontal wall mounting (connecting tubes are on the LEFT side)
- high quality insulation
- arbitrary water temperature setting to 75°C
- additional functions:
- thermometer for displaying water temperature inside the heater
- display of electrical heating element operation
- temperature setting options :
- economical temperature and
- protection against freezing
- indirect tubular air-heating elements
- simpler maintenance and service
- 2 year general warranty, 7 year warranty for the tank
|
|
|
OSV Slim is a wall-mounted capacity water heater. Slim storage water heater was designed especially for limited space. Thanks to reducing the width to 36 cm only, it occupies much less space than traditional storage water heaters.
|
|
These products are sold in Armenia, Azerbaijan, Bulgaria, Georgia,Germany, Kazakhstan, Lebanon, Spain.
Convenient for every house by its 3 different capacity ( 50 lt, 65 lt, 80 lt) option.
There are standart / lux / digital alternatives of prismatic model.
Has very high corrosion resistance due to enameling treatment with titanium addition, applied to water reservoir.
Ensures high energy saving by means of mono-bloc polyurethane isolation of 3 cm thickness.
Has long life due to its magnesium anode with high potential in compliance with DIN norms. Perfectly safe against negative electro-chemical effects that may come out at operational conditions.
Ensures operation without problem by means of its newly designed heaters working without any problem at different consumption water conditions and its electrical components having international VDE certificate.
|
|
TP-200 T (200 liters)
Electric cord
Round external format
Vertical installation
Resistance immersion heater out of copper
Anode Magnesium
Polyurethane insulation without CFC
Internal thermostat
Thermostat of safety
TP-200 T all currents: 230V transformable single-phase current in 230V three-phase or
400V three-phase.
Options: Tripod/Kit of legs of transfer
|
|
|
|
|
|
Gorenje has upgraded its heaters with electronic regulation for more demanding customers.
They are equiped with an accurate, intelligible and easy-to-use electronic regulator, which assures optimal energy consumption. It provides a clear display of the heating element's status, magnesium anode consumption and desired and actual water temperature in the tank.
An elegant electronic display makes it even easier to set your water heater to your own particular needs. These heaters are thus ranked among the most economical and user friendly devices on the European market.
The OGB EDD heater is characterised by the superb technical design of its heating elements. An air heating element is inserted into a protective metallic tube within the heating flange.
The tank as well as the protective tube is enamelled against corrosion. It allows for the maximum degree of protection of the enamelled surface by a magnesium anode, reduces sedimentation and facilitates maintenance.
- original angular shape
- high quality insulation for lower heat loss
- indirect air-heating elements are assuring better relaibility and lo
Digital electronic controller
- Electronic regulation with soft%u2013push buttons
- Temperature range from 35°C to 85°C (1%u02DA accuracy)
- Magnesium anode consumption measurement
- Measurement of actual water temperature in the heater
- Temperature setting with soft-push buttons
- manual mode - arbitrary temperature setting up to 85°C
- economical temperatures (55°)
- freeze protection (7°)
- electrical heater On/Off mode
|
|
|
|
|
|
The OTG generation is distinguished by its original octahedral design, endowing it %u2013 and thus any room in which it is fitted %u2013 with a completely new character that heralds the dawn of the new millennium. OTG heaters thus flirt with the future and mark a new trend in design at Gorenje.
The tank is manufactured from a high-quality steel sheet and is protected against corrosion by an enamel coating and a protective magnesium anode. The thick insulation made of hard polyurethane foam keeps thermal losses to a minimum.
The OTG heater is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
- Top Class model
- new elliptic shape
- superb thermal insulation
- arbitrary water temperature setting to 75°C
- additional functions:
- thermometer for displaying water temperature inside the heater
- display of electrical heating element operation
- temperature setting options:
- economical temperature and
- protection against freezing
- simple installation and maintenance
- 2 year general warranty, 3 year warranty for the tank
|
|
|
|
|
|
GB electrical water heaters are the result of the application of a wealth of experience utilised in conjunction with application of the most modern technical solutions.
The new and original solution of the heating element guarantees improved applicability and reliability of operation, also ensuring that the GB heater requires an absolute minimum of maintenance.
An air heating element is inserted into a protective metallic tube within the heating flange. The tank as well as the protective tube is enamelled against corrosion. It allows for a maximum degree of protection of the enamelled tank surface in combination with a magnesium anode, reduces sedimentation and facilitates maintenance.
The GB heater is intended for the supply of a single outlet or for the central supply of hot water to numerous outlets from a single heater.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
Due to its universal design, the GB heater can be wallmounted vertically or fixed horizontally on the floor.
- Standard Long Life model
- high quality insulation
- arbitrary water temperature setting to 75°C
- additional functions:
- thermometer for displaying water temperature inside the heater
- display of electrical heating element operation
- temperature setting options :
- economical temperature and
- protection against freezing
- indirect tubular air-heating elements
- simpler maintenance and service
- 2 year general warranty, 7 year warranty for the tank
|
|
The TGU heater has been developed within the TG family, nevertheless %u2013 due to its universal design %u2013 it offers also vertical and horizontal wall mounting (with connection tubes on the left side).
It is intended for the supply of a single outlet or for the central supply of hot water to numerous outlets from a single heater.
Due to its smaller external diameter, it is suitable for apartments as well as for other smaller premises. The new design of the heating flange with a larger opening facilitates cleaning and maintenance.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
- Basic model
- vertical or horizontal wall mounting (connecting tubes are on the LEFT side)
- factory setting to economical temperature
- additional functions:
- thermometer for displaying water temperature inside the heater
- display of electrical heating element operation
- simple installation and maintenance
- 2 year general warranty, 3 year warranty for the tank
|
|
|
|
|
|
OGB heaters combine the properties of the GB family and the design of the OTG family. Internally, all the recognised characteristics of the GB family are retained, including the air-heating elements inserted into a metallic protective tube inside the heating flange. Both the tank and heating tubes are enamelled and protected with a magnesium anode against corrosion.
Distinguished by its distinctive countenance, this heater too defines a completely new character for such heaters in the new millennium.
The OGB heater is intended exclusively for vertical wall mounting.
With an appropriate mixer tap, it can also be used in a non-pressurised system.
- Top Class Long Life model
- new angular shape
- arbitrary water temperature setting to 75°C
- additional functions:
- thermometer for displaying water temperature inside the heater
- display of electrical heating element operation
- temperature setting options:
- economical temperature and
- protection against freezing
- indirect tubular air-heating elements
- simpler maintenance and service
- 2 year general warranty, 7 year warranty for the tank
|
|
|
|
Hot-water heaters
