|
|
|
|
|
|
MGK Gas condesing boiler up to 300 kW
-5 sizes with modulating controlled output, output range from 23 to 294 kW
-cascade control system with up to 4 gas condensing boilers enables an output range up to 1.2 MW
-extremely low-emission combustion, average annual efficiency up to 110 %
-high capacity heat exchanger in robust aluminium-silicon alloy which requires liitle -maintenance and is very durable
-compact and space-saving design; can be installed close to a wall with no need for -space at the back or to the left
-all components easily accessible fro the front
-easy installation and pipework assembly, all connections lead upwards
-completely wired control unit
-raising return-flow temperatures not necessary
-no minimum water circulation volume required
-can be combined with solarthermal systems to create a Wolf solar heating system
-Designed in the typical Wolf look with easy, uncomplicated installation and maintenance. With this wall-standing MGK gas condensing boiler, Wolf has added another energy saving product to its gas condensing devices.
An outstanding feature of the MGK is fast and space-saving installation and maintanance. For it can be installed flush with the wall and all connections are on the top.
|
|
MK-2 without forced draught oil burner (320-1017 kW)
High normative efficiency: up to 94%
Stainless steel turbulators integrated in flue-gas passes
Boiler elements made of durable, corrosion-resistant cast-iron
Ideally proportioned combustion chamber
Cast-iron boiler door opens left/right accross entire front, easy cleaning
Amply dimensioned thermal insulation
Powder-painted casing with supreme finish, easy to assemble
Pre-wired control system, plug-in system for easy installation
Six-year guarantee on boilers, two-year guarantee on electrical parts
|
|
Long lasting cast-iron heat exchanger design
Circulating pump (cartoned inside crate)
Swing burner door design
Includes tankless coil
Barometric vent control
Cast-iron push nipples
20-year non-prorated heat exchanger warranty
|
|
Economic, quiet, environmentally-friendly: Weishaupt oil condensing systems for steel and cast iron boilers take the heat energy contained in the combustion flue gases and feed it to the heating circuit. The effect is that your heating oil requirement drops noticeably. At the same time, emissions are significantly reduced. The flue gas condenses and is drained into the waste water system. The remaining flue gas can escape via inexpensive plastic pipes.
|
|
19 kw to 70 kw for Diesel Oil
Overall efficiencies at 100% load up to 93%
Overall efficiencies at 30% load up to 94,5%
EN 303
TÜV, Efficiency Directive 92/42/EEC and Directive 89/336/EEC
Electromagnetic compatibility
Working pressure of 3 bar
Complete system including
Fan assisted oil burner
Circulation pump
Control panel
Safety instruments
Maximum reliability and longer life
High thermal stress
Flexible casting
Easy and safe operation
Automatic burner firing control
Programmable timer
|
|
The Alfa range is designed to meet the needs of people who appreciate stabilehot water supply that is simple and economical. It is particularly well-suitedto the situation when a bath and a shower are used simultaneously.
|
|
|
|
|
|
The attractively priced three-pass boiler
Vitorond 100 is an advanced cast iron three-pass boiler at an attractive price. The optimised thermal insulation of the Vitorond 100, together with the Vitotronic control unit fitted on top, further reduce the installation time.
The sectional cast iron Eutectoplex heating surface represents high operational reliability. By offering even heat distribution, stress fractures are practically a thing of the past. The wide water galleries prevent sediment and boiling noises no longer cause a nuisance. The JetFlow system specifically guides the cool heating return through the whole boiler. This prevents cold zones and condensate being created at the back of the boiler. In critical areas, too, the boiler water temperature remains above the dew point.
Easy installation and maintenance
Resilient gaskets permanently seal the individual sections on the hot gas side. Also, the horizontal layout of the hot gas flues permits thorough and easy cleaning of the boiler.
Benefits at a glance:
Cast iron low temperature oil fired boilers, 18 to 100 kW
Standard efficiency: 89 % (Hs) / 94.5 % (Hi)
Eutectoplex heating surface for high operational reliability and a long service life
Economical and environmentally friendly through lowered boiler water temperature when the outside temperature rises
Cast iron sections with a resilient seal for permanent hot gas soundness
The JetFlow system specifically channels the cool heating return through the whole boiler, thereby preventing condensation and stress fractures
Simple and complete boiler maintenance through horizontal hot gas flue layout and easily removable turbulators
|
|
|
|
|
|
Oil-fired condensing boiler for gradually reduced boiler water temperature, consisting of:
Boiler body in sectional design made of ferrite-perlite gray cast iron GG20, steel metal jacket, powder coated.
Condensing heat exchanger with plain ended pipe of high-quality corrosion resistant ceramic. Factory equipped with connection lines from boiler body tocondensing heat exchanger.
“Premio/TH“ fan-assisted oil burner type approval in accordance with DIN EN 267 for 1EL, with oil pre-heating, 2 oil hoses 1 m, factory adjusted warm.
TopOne controller. Weather-guided controller for boiler circuit and 2 mixer circuits each with its own heating and time program via 5-channel digital timer, frost-protection, automatic summer/winter mode switching,electronic hot-water storage controller with hot-water storage priority circuit, separate time program for hot-water storage charging, legionella protection; connection for circulating pump. Oil level sensor for plastic tank, boiler circuit or mixer circuit 2 convertible for solar mode.
|
|
|
Reliable, efficient, long-lasting: The body of the Weishaupt Thermo Unit G boiler is cast in one piece. House owners value the heating unit, which has been proven 100,000 times, as a long-lasting partner and as an exemplary and reliable energy-saver.
|
|
OUR STRONG POINTS:
- High efficiency generator on liquid or gas flue, with three flue passes, cooled combustion chamber, for the production of hot water for central heating, suitable for operation either connected to a traditional system or connected to a low temperature heating system, with a minimum return temperatur of 35°C.
- G20 cast-iron boiler body made up of elements to be assembled when installing the generator in the heating system.
- Steel casing painted grey by anaphoresis using epoxy powder paint.
- Modern and elegant lines.
ADVANTAGES OF THE GN4 N:
- High efficiency achieved by the combination of high technology and maximum constructional rationality.
- Special layout of the cast-iron body, and additional attachment that allows the boiler to be connected in two different ways, according to the traditional system or alternatively to a low temperature heating system.
- Fitted for two-stage burners.
- Wired for control unit.
|
|
|
|
|
|
The compact classic with biferral composite heating surface
The biferral composite heating surface of the Vitola 200 has become a benchmark for high quality and reliability. The Vitola 200 combines convenience and economy at a reasonable price, and is a milestone in the history of heating technology.
The Vitola 200 is compact in its dimensions. Balanced flue operation is now an option when the boiler is used in conjunction with a Vitoflame 200 (up to 33 kW).
Thinks for you and saves energy
Many boilers tend to be used all year round at a constant temperature. This results in huge losses, especially during the summer months when less energy is required. The Vitola 200 is different: its cast iron and steel biferral composite heating surface enables it to modulate the boiler water temperature to suit the outside temperature. When no heat is required, it shuts down completely, thus greatly reducing your heating bills.
Clean combustion
Emissions fall substantially below the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act when the Vitola 200 is used with the Vitoflame 200 oil burner. Optimum combustion chamber geometry and thorough flame burnout are the reason for these low emissions.
Benefits at a glance:
Ultra-low temperature oil fired boilers, 18 to 63 kW
Standard efficiency: 90 % (Hs) / 96 % (Hi)
Biferral composite heating surface for high operational reliability and a long service life
Clean combustion: Performs substantially better than the limits required for the "Blue Angel" certificate of environmental excellence and the Swiss Clean Air Act
|
|
For very high heat outputs of up to 19,200 kW the Buderus SB 825L condensing boiler is a premium quality choice. The boilers are simple to service and maintain with easy to access combustion chambers and heating surfaces ensuring straight-forward operation, life-long durability and overall system efficiency.
|
|
|
|
|
|
Type M233, low-pressure steam generator with a steam output of 2.6 to 4.5 t/h (1890 to 3270 kW).
Vitomax 200 is a low pressure steam boiler for a permissible operating pressure of 1 bar steam output: 2.9 to 5.0 t/h. In this output range, the Vitomax 200-LS covers the requirements of all applications demanding low pressure steam or heat, e.g. airconditioning and heating systems, commercial nurseries or other commercial applications. The Vitomax 200-LS is a three-pass boiler with low combustion chamber loading (< 1.2 MW/m³). This creates the ideal conditions for clean combustion with low nitrogen oxide emissions.
The Vitomax 200-LS benefits at a glance:
Three-pass boiler with low combustion chamber loading (< 1.2 MW/m3) - clean combustion with low nitrogen oxide emissions
Low radiation losses through 100 mm thick composite thermal insulation and fully water-cooled reversing chambers
Economical fuel consumption - boiler efficiency: 92 %
Excellent steam quality through large steam chamber, large evaporator and integral steam drier
High operational reliability through excellent natural circulation and safe heat transfer - supplied as standard with robust shipping and installation protection
Easy to service through large boiler door and easy accessibility during maintenance work
Walk-on cover on top of the steam boiler as part of the standard delivery - simplifies installation and maintenance
|
|
| ... products without information |
| |
|
|
Oil boilers
