|
|
Electromechanical locks deliver an added value to hotel guests and staff. Ease of administration, increased security and convenience are just a few of the obvious benefits.
With solutions over in 5 million hotel rooms, ASSA ABLOY Hospitality is clearly the world's largest provider of hotel locking systems. We provide customer-focused, turnkey solutions in over 155 countries around the world
|
|
|
The GE Model 430 and 435 Magnetic Stripe readers are rugged, reliable, and easy to install. Model 430 is a magnetic stripe technology reader that can emulate the operation of an IBM 5029 reader, allowing for communication with older IBM microcontrollers. Simply set a jumper to select 5029 emulation mode.
|
|
Our parking management option enables efficient and secure use of parking lots. A barrier is normally insufficient for this task. You can control access to the parking area and evaluate data individually for each person and also reserve parking facilities for visitors. The Kaba exos parking management feature is an element of our integrated overall system for access control and time & attendance.
Your advantages at a glance
Individual assignment of parking lots
Automate management
Reserving visitor parking lots
Originator accounting
|
|
The card reader integrates access
control into the integral appearance of
the sytem design, including card
guidance and pilot LEDs. The security
technology of all leading card reader
suppliers fits neatly behind the Siedle
front.
|
|
|
BC43 is a card and PIN reader for SiPass Entro or SiPass Entro Lite. Two units can be installed for indoor/outdoor use. The keypad is equipped with background illumination. For flush mounting, use the BB4 flush mounting unit.
|
|
12-digit membrane keypad keys
- 5-digit programmable master code
- Audible & Visual feedback (buzzer & LED)
- 1000 programmable proximity badges and
1000 programmable user codes
- 1000 event memory
- 3V CR1225 battery
- 5 time zones
- 16 holiday schedules
- Removable EPROM memory
- Real-time event printing
- Capability to print all the events and the configuration of the unit
- Capability to print the list of badges and user codes
- Anti-passback
- 1 request-to-exit input
- Tamper switch
- 1 door relay output 3 Amp @ 125V N/O & N/C contact
- 1 alarm relay output 3 Amp @ 125V N/O & N/C contact
- Door status monitoring
- Resin coated
- 3 operating modes:
. Mode 0: badge and code
. Mode 1: badge only
. Mode 2: badge or code
- Input voltage: 12VAC/DC
- Consumption: 300mA
|
|
Polycarbonate: "V0" standard
- Polycarbonate proximity reader including reader
controller (bus interface)
- The DFP double side sticker placed at the back of the LPMID
offers the possibility to mount the reader on glass frame
- Excellent reading range (20 cm with a CP card)
- Up to 50M between the reader and the reader controller
- Input voltage: 12V AC/DC
- Consumption: 150 mA
|
|
|
|
|
|
RFID 2
RFID/2’s are general purpose readers and read/write modules that can be used for any AutoID applications.
In Wiegand and buffered versions Long-Distance connection can reach up to 100m.
In bidirectional connection RS232 (or TTL) allow complete handling of read/write, multisegmented applications and “Multi-applications”.
Maximum Security applications can be implemented using LEGIC® advant technology with encrypted transmissions.
RFID/2 readers are supported by all AXESS TMC terminals in read-only applications. Read/Write applications may require customized SW development.
Technical features:
User signals
Buzzer (125 KHz versions only)
Red LED and Green LED, controlled by the host device. (The red is also controlled by the reader in the not LEGIC® versions).
Reading distance
From 30 to 150mm depending on the RFID technology.
Wall mounting
Two front-pass-through holes for screwing into the wall. Transparent plastic cover for screws and LED protection. Cable can exit from the back, into a hole in the wall. Or downside (or left/rightside) on the same wall side, through break-able edges.
OEM Versions
No casing, only circuit versions available.
Certificates
CE and FCC.
Electrical and physical characteristics
Power supply: +5..16Vdc 80mA (versions 904.200.17)
+5Vdc 70mA (versions 904.201.14 and 904.205.15)
+5..16Vdc 150mA (versions 904.202.14 904.206.15)
Environmental: IP67 (904.200.17 IP65 only)
Working range: -20°..+60°
Size: mm 102 x 42 x 23
For further information www.axesstmc.com.
|
|
|
125 KHz high security, digitally encrypted, 26-Bit proximity card reader that connects to a serial port on an HAI Home Control System. The reader has durable and scratch resistant polycarbonate housing. Full epoxy potting ensures successful operation even in harsh environments. The 75A00-1 can be mounted to metal door frame (mullion) or to any flat wall surface. The two color LED (green and red) and Piezo sounder guarantee accurate and reliable door access operations.
|
|
Description: Flash Card electronic opening system
External shell finishing: alluminium, chrome matt
Internal shell finishing: black
Voltage: 12v
|
|
• Compass Reader is the proximity reader which receives an input from the transponder, sends the signal to Compass 485 which carries out the necessary checks and allows or prevents access.
• Tampering actions do not entail any risk: as it is only a card reader, Compass Reader cannot allow opening
• Reading distance: between 5 and 10 cm from the reader
COMPASS READER: Proximity reader to be used with
COMPASS 485
Power supply voltage: 12Vdc (supplied by
Compass 485)
Degree of protection: IP44
Max connection distance between reader and management
unit: 10 metres
Reading distance: 5-10 cm
Signal indications: Buzzer + two-colour LED
Installation: wall-mounted.
|
|
READERS
MAXSYS supports a wide range of 26-bit Weigand readers:Polaris™, ioProx™, Shadowprox™, HID and Kantech XSF Technologies.
|
|
|
GE's Transition Series multi-technology readers put you in control of multiple access control technologies and platforms. The innovative architecture of the Transition Series supports access cards, key fobs, tags and more, from every major format: GE and HID Proximity, HID Corporate 1000, MIFARE CSN (ISO 14443A), MIFARE/DESFire CSN, Vicinity CSN (15693), and HID iCLASS CSN. Transition Series readers also work with any access control system that uses Wiegand-based data communications between 26 and 176 bits, including GE's CASI, Infographics, EST and Identicard product lines.
|
|
Sophisticated access point management ranges from simple doors to complex isolation systems. To ensure smooth operation all components must be precisely coordinated; for example all monitoring and locking elements must be synchronized. These are demanding tasks which you can solve with Kaba exos - both effectively and efficiently.
Your advantages at a glance:
All demands covered with one system
High availability ensured
Customized control
|
|
BC43-EM
The BC43-EM is a proximity and PIN reader for SiPass Entro or SiPass Entro Lite. The built-in keypad offers the possibility of combined access control with both a card and a PIN for higher security. The robust design of the metal casing protects the reader against tampering and makes it extremely vandal resistant.
|
|
- The controller has a built-in:
. 2-channels RF receiver (433 MHz)
. 1 proximity reader
- 3-digit 7 segment display
- Up to 3-door access, 1 access controlled by the RF
receiver and 2 accesses by other readers:
. 1 or 2 proximity readers (DGLP, DGLP/T, DGLI)
. 1 or 2 keypads (KCP, KCP/BP)
. 1 or 2 magnetic stripe readers (DGLM)
- Capacity of 800 users
- Access level definition
- Capability to make a backup of the UCA3 units
(with LOG/UCA3 software)
- Capability to connect readers from different technology
on the same unit
- Programmed via the front panel or by PC
- Easy and fast access to the menu
- 3 relay outputs N/O and N/C contacts 8 Amp @ 250V
- 2 request-to-exit inputs
- Latched or timed out
- RS232 output for PC connection (need to add the BMU
interface unit)
- Real-time events printing
- Input voltage: 12V AC/DC
- Consumption: 500mA when 3 relays activated
|
|
- 12-digit membrane keypad keys
- 5-digit programmable master code
- Audible & Visual feedback (buzzer & LED)
- 500 programmable proximity badges and 500
programmable user codes
- 1 request-to-exit input
- Tamper switch
- 1 door relay output 3 Amp @ 125V N/O & N/C contact
- 1 alarm relay output 3 Amp @ 125V N/O & N/C contact
- Door status monitoring
- Resin coated
- 3 operating modes:
. Mode 0: badge and code
. Mode 1: badge only
. Mode 2: badge or code
- Input voltage: 12VAC/DC Digiprox®
- Consumption: 250mA
|
|
The CASI Model 840 and Model 845 Contactless Smart Card Readers provide superior access control with Mifare® 1 badges. There is no need for a smart card application programmer.
Models 840 and 845 are compatible with the entire CASI Micro/5 family of microcontrollers and related 2RP, 2SRP and 8RP reader processors, and the Micro/PX-2000 and Micro/PXN-2000 microcontrollers.
|
|
|
Only two products are necessary for a SiPass standalone installation: one ARS6311-RX card reader and one ACS6311 IO-board. A SiPass standalone installation can also use two ARS6311-RX card readers (one at the entry, the other at the exit side of the door), enabling two-way passage control. The system setup utilizing an ACS6311 provides a higher level of security for access control by separating the reader at the door from the relay board mounted in the secure area.
|
|
| ... products without information |
| |
|
|
Access control: card readers
