Access control and identificationProducts based on RFID (Radio-Frequency Identification) technology are some of the fastest-growing for ASSA ABLOY. RFID's benefit is that it enables security monitoring and access control without physical contact.
Customers look to trusted leaders in access control and identification for the solutions they are seeking, with products influenced by IT standards, enhanced security measures built in, and technology expertise for contactless access and transaction applications.
Built-in push-botton panel, programmable to
control pedestrian and vehicular access, usable
in two operation modalities: with “serial connection”
and with “interface to COMPASS system”.
- Surface mount stainless steel keypad
- Completely sealed (filled with epoxy)
- Remote controller mounted in a weather resistant plastic box
- Programming password protected
- Capacity 100 user code of 4 to 5 digits
- 2 form C outputs
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- 2 LED's for visual feedback
- Request-to-exit input
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Varnish coated PCB (protection against high levels of humidity)
- Operating voltage: 12V to 24V AC and 12V to 48V DC
- Consumption (when 3 relay outputs activated
and keypad illuminated):
. 12 V AC: Standby 90mA
. 24 V AC: Standby 46mA
. 12 V DC: Standby 100mA
. 24 V DC: Standby 55mA
. 48 V DC: Standby 30mA
- Aluminium keypad
- Corrosion resistant flush casing
- Programming Password protected
- Capacity 100 user codes of 4 to 6 digits
- 1 form C output (optional: 2 or 3 outputs)
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Varnish coated PCB (protection against high levels of humidity)
- Audible feedback for operating and programming
- LED's for visual feedback
- Request-to-exit input
- Push button for request-to-enter
- Illuminated push button
- Aluminium or gold finish
- Operating voltage: 12V to 24V AC and 12V to 48V DC
- Consumption:
. 12V AC: Standby 20mA, when 3 relays activated
100mA max
. 24V AC: Standby 10mA, when 3 relays activated
50mA max
- Surface mount stainless steel keypad
- Completely sealed (filled with epoxy)
- Programming Password protected
- Capacity 100 user codes of 4 to 6 digits
- 2 form C outputs
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- 2 LED's for visual feedback
- Request-to-exit input
- Push button for request-to-enter
- Tamper Switch
- Operating voltage: 12V to 24V AC and 12V to 48V DC
- Consumption:
. 12V AC: Standby 20mA,
when 2 relay outputs activated 100mA max
. 24V AC: Standby 10mA,
when 2 relay outputs activated 50mA max
- Surface mount stainless steel keypad
- Completely sealed (filled with epoxy)
- Programming Password protected
- Capacity 100 user codes of 4 to 6 digits
- 2 form C outputs
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Request-to-exit input
- Push button (KCIEN version only)
- Tamper Switch
- Operating voltage: 12V to 24V AC and 12V to 48V DC
- Consumption:
. 12V AC: Standby 20mA, when all 2 relay outputs activated
100mA max
. 24V AC: Standby 10mA, when all 2 relay outputs activated
50mA max
- Stainless steel keypad
- Programming Password protected
- Capacity 100 user codes of 4 to 6 digits
- 1 form C output (optional: 2 or 3 outputs)
- Keypad Illumination duration programmable
- Audible feedback for operating and programming
- Timed output 1 to 99 seconds or latched
- All programming stored in non-volatile EEPROM memory
- Varnish coated PCB (protection against high levels of humidity)
- LED's for visual feedback
- Request-to-exit input
- Operating voltage: 12V to 24V AC or 12V to 48V DC
- Consumption:
. 12V AC: Standby 20mA, when 3 relays activated 100mA max
. 24V AC: Standby 10mA,, when 3 relays activated 50mA max
The Model 660 Touchpad Reader is a compact, easyto- install touchpad reader intended for sites which require badgeless entry. This touchpad reader provides sites with an option to traditional badge readers.
Model 660 touchpad reader operation is compatible with all Entry PerfectTM, Secure Perfect®, and Picture PerfectTM access control systems and Micro/5-E, Micro/5-PX and Micro/5-PXN controllers when configured with either a 2RP or 2SRP reader processor. Up to two Model 660s may be connected to each 2RP or 2SRP.
Keypad operation for secure access.
2 channel radio keypad - you can control up to 2 applications (gate and garage door).
1 main code and 4 secondary codes for multiple users.
4 to 6 digit security code.
No wiring - battery powered with illuminated keypad
Not only can the cPAKL code lock be installed in their own right for access control purposes, but it is also ideal for supplementing existing PAK door intercom systems, which is the matching front-door station series. With a surface-mounting height of just 16 mm, the cPAKL is designed to be compact.
Front-door station series with access control free-standing or surface-mount for up to 5 / 20 flats
Selective performance parameters
The PSD/PSE with access control includes all performance parameters of the series PSD/PSE audio area in addition to the following.for up to 89 iKeys / tKeys / tCards in the decentralized running (manual read-in)
for up to 250 iKeys / tKeys / tCards in the decentralized running (software supported)
for up to 1000 iKeys / tKeys / tCards in the centralized running (PC-administration)
potential-free relay contact (closing contact iPSD/iPSE resp. two-way contact tPSD/tPSE: 24 V DC / 2 A)
optical and acoustic acknowledgement when key is read
Access control: code keypads
