|
|
The Rémo-C module contains two independent relays allowing a room-manager to manage two electrical loads, for example:
-A gas furnace / heater, either for the temperature management (thermostat) and also for day/night function if the furnace supports this function.
-An air-conditioner, for temperature management and also for automatic shutdonw during your absence.
-A water heater or other houshold appliances, to start at a specific time during low-rate hours.
-A strong lighting element, for example, a chandelier, or architectural lighting.
-A small electrical pumps, or electric-valves for sprinkler control, fountain animation, filling up container, etc.
-Interface with an alarm system, to trigger the alarm or to activate it automatically when everybody left the house.
-Interface with a HVAC or other ventilation system.
-To control an electric outlet and other appliances like TV, Hifi, etc.
|
|
Features
Supply voltage 230V +10%/-15%
Assigned frequency 50 Hz
Number of zone of programming 1
Cycle daily
Detection unballasting connection TV-information
Cycle unballasting 3 mn
Many exits wire control 3 exits of 30mA
Composition of modular kit 1 box + 1 box of environment
Outdistance max between modular box and box of order 50 m
Many modules 3
|
|
The manager of energy
He makes it possible to manage several zones and to lighten part of the zone (zone example harms: unballasting of a room). It is connected on the electronic meter of subscriber, which thus makes it possible to question electricity consumption permanently and to lighten the nonpriority circuits in the event of going beyond of contract EDF.
It communicates with the programmer of environment and the local orders of exemption.
Possibility of remote control by Axiophone IP.
Exist in solution "comfort" and "interactive" solution with technology "In One by Legrand" with transmission current.
|
|
Technical characteristics
Supply voltage 230V +10 / -15%
Température de consigne réduit 8 / 28°C
Température de consigne dérogation hors-gel 8 °C
Différentiel statique 0,2°C
Cycle weekly
Programming capacity 24
Probes to be associated EK081/ EK082 / EK083
Max. distance for probe connection 50 m
Type of contact 1 changeover
Breaking capacity 2A 250V AC1
|
|
|
Talento DIN-rail includes a wide variety of time switches which are available in various switching capacities and frequencies.
|
|
- Daily and weekly program
- 50 Memory spaces
- Synchronisation time/date though optical wave guides
- Automatic summer time /winter time changeover
- 10 years running reserve
- Manual switch: FIX ON / FIX OFF
- Free weekday block formation
- Non-volatile memory (EEPROM)
- Pulse and cycle function
- Random switching
- External input
- PC-supported program creation
- Date-dependent switching programs
Applications
- Advertising signs
- Street lighting
- Shop window lighting
- Home & work environment
- Devices, motors and pumps control
- Sun blinds
- Shutters control
- Simulation of home presence
|
|
Features
Supply voltage 230V + 15%
Assigned frequency 50/60 Hz
Cycle weekly
Number of zone of programming 2
Reserve step 5 years
Smoothness of programming 1 mn
Precision of step ± 1,5 S/24:00
Index of protector IP 20
Operating temperature -5 to 45 °C
Temperature of storage -20 to 70 °C
|
|
Electronic
Automatic recognition of 3-line or 4-line connection
Lighting or ventilation for
- Stairs
- Basements
- Halls
|
|
|
Grässlin trealux switches on the staircase light at a button click and switches it off again after a pre-set period of time. Turnus switches light in accordance with light intensity and time, be it for shop windows, street lighting, illuminated billboards etc.
|
|
Brightness Sensor, 3-channel, MDRC
For switching lighting and other loads via ABB i-bus® switching actuators dependent on the daylight light intensity. Can be used as a twilight switch (1-10 lux) or a light level switch (100-20,000 lux). The light sensor is supplied with the device.
|
|
- Dimmer can be controlled by several ways: button, external potentiometer, analogue signal 0-10 V (1-10 V), bus of INELS system.
-Extendable by modules up to 10 kVA
-When controlled by a button, the selected brightness is stored into memory and if switched on again it switches in this particular brightness.
-Output state is indicated by yellow LED according to type of connected load.
-Possibility of parallel connection of buttons.
-Electronic over-current protection, protection against over-load and short-circuit.
-Protection against temperature overrun is in-built inside the device – switches output off + signalize temperature overrun by red LED flashing.
-In 6-MODULE housing, DIN rail mounting.
|
|
|
Grässlin turnus switches light in accordance with light intensity and time, be it for shop windows, street lighting, illuminated billboards etc.
|
|
Applications
- Shop lighting
- Car parking lighting
- Shutters control
- Advertising signs
- Street lighting
- Sun blinds
|
|
Comfort
Devices for home management of electrical appliances and lights: from simple twilight switches and electromechanical or electronic time switches to innovational astronomical time switches.
Staircase light switches and movement detectors fill any other household requirement.
|
|
Technical characteristics Value
Supply voltage 230 V
Breaking capacity 16A 250V AC1
Type of contact 1 changeover
Plage de mesure de luminosité 5 to 2000 Lux
Maximum connection distance between receiver and transmitter 50
Number of modules 3
Operating temperature -10 to 50 °C
Puissance éclairage incandescent 2000 W
Protection index IP 20
Acceptable current rating with AC1 16 A
|
|
|
|