Vapor barriers

Effisus VapX Membrane is a one-ply vapour control layer (VCL) for roofs, facades, dry and general construction indoors in order to build an airtight barrier for the protection of construction according with DIN 4108. The carefully selected ...

Perforated underlay for partially bonded system . The partial bonding of the waterproofing is secured by the ratio of the perforations and the anti-adherent polyester underface of PERFADER. MAIN USES Partial bonding waterproofing ...

ADEVAPO is a vapour barrier with a bituminous self-adhesive compound on the underside and a composite surfacing of aluminium foil and strong HDPE film. Hhigh mechanical strength and high resistance to the passage of water vapour. MAIN ...

Elastomeric bitumen Vapour Control Layer (VCL). Rootproof due to its glass fleece reinforced VCL. High mechanical stability. MAIN USES Vapour Control Layer (VCL) to be torched or loose-laid under insulating boards. DESCRIPTION Elastomeric ...

This vapor-barrier film is a synthetic film manufactured by polyethylene granule extrusion. The film is EC certified according to standard NF EN 13984 and has been designed for use in CULTISOL made-to-measure EPDM waterproofing installations. ...

IKO SHIELD SA is a vapour barrier composed of elastomer (SBS) bitumen and a glass fibre thread or polyester-glass composite inlay. The upper surface is finished with ALU foil and the lower surface is self-adhesive. Benefits • Suitable ...

DuPont™ AirGuard® Control is a vapour control layer for roofs, ceilings and walls reducing uncontrolled air leakage and heat losses. The overall balance in drying capacity of the construction is maintained with DuPont™ AirGuard® Control ...

JUTAFOL N AL is manufactured in two weight modifi cations: economy 125 g/m2 and robust 170 g/m2, as synthetic multilayer foil composing of refl ective aluminium layer, scrim reinforcement and coating, to form refl ective reinforced completely ...

With an R-Value of 0.79 m2K/W, Reflectatherm Plus is the industry leading reflective vapour barrier. It combines the highest thermal performance in its class with a high vapour resistance to prevent interstitial condensation.Suitable ...

With insulation, sealants and nails available from the same supplier as your siding, rainware, trim and architectural accessories, Kaycan is a one-stop shop when it comes to finishing a house’s exterior. Kaycan’s StyroFold 5 Plus and ...

Extremely safe to walk on even in wet conditions 2 integrated self-adhesive areas Airtight and resistant to driving rain Highly tear-resistant Can be used as a temporary roof cover

Moniers Divoroll® range of vapour-permeable underlays offer high standards of quality, performance and durability and maximise the lifespan of the roof. Thanks to its permeability Divoroll® allows the roof to breathe and offers additional ...

A VAPOR CONTROL MEMBRANE YOU CAN RELY ON In recent years, there is a clear trend to have more energy-efficient buildings, which is also driven by building regulations. The roof is a large part of the building envelope and therefore has ...

ALUTRIX® 600 and ALUTRIX® FR are self-adhesive vapour barrier membranes designed for use in a wide range of construction applications. The membranes are suitable for use beneath mechanically fixed single-ply roofing membranes, self-adhesive ...

A high quality active vapour barrier with low Sd=4,5 m, efficiently limiting water vapour diffusion. Waterproof at 2kPa, durable and resistant. Three-layeredy with weight of about 85 g/m2 and thickness of 450 μm. MATERIAL Polypropylene ...

CHAPE ATLAS® AR is a flexible SBS elastomeric bitumen waterproofing membrane with a composite (glass scrim – glass fleece) reinforcement. The topside benefits from an embossed aluminum sheet protection covered by elastomeric bitumen ...

Stop condensation with Fabral factory applied CondenStop. Easily and effectively prevent condensation and the problems caused by condensation by installing Fabral panels featuring CondenStop on your next project. Saves time and money ...

USB MICRO STRONG is a three layer vapour barrier which is impermeable to water and air; the top layer is made of non-woven polypropylene fabric which protects the low breathability polypropylene middle microporous film against trampling ...

POLYDECK is a prefabricated protective bitumen underlay offering excellent performance when used under tiles or on ventilated timber roofs. It is made from a blown bitumen compound and a pinhole-perforated spunbond polyester nonwoven ...

AIR VAPOUR CONTROL LAYER AVCL Air vapour control layer AVCL made of 2 layers of EVA and PL for application on hot side of heat insulation on roofs.

Vapour barrier comprising polypropylene spunbond nonwoven with special monolithic coating. Reliably protects the internal roof construction against moisture and draughts. Also available with woven reinforcement

HDPE film (high density polyethylene) to protect against rising damp. Do not expose to direct sunlight. Isolmant 200 BV is a vapour barrier suitable in all cases where it is necessary to protect screeds and/or flooring from rising ...

SELF-ADHESIVE SEALING MEMBRANE USE For sealing floor slabs against rising moisture or for horizontal sealing in and under walls according to DIN 18533-W:1.1-E/1.2-E/4-E For use against soil moisture and non-accumulating seepage water Also ...

APP plastomeric bituminous vapor barrier, fiberglass reinforced with aluminum foil, thickness 3 mm. Purpose: Vapor barrier. Cold Flexibility -10°C. Benefits: Product of high mechanical performance and extremely high vapor tightness.

Waterproof sheet that allows to control the passage of vapour through the roof, avoiding condensation. It must be placed below the thermal insulation.