|
|
Developed to widen the Alluser Portal range the HPJ 140 proposes
an intermediate model between the portal with traditional dimensions and the Maxi models.
Characteristics:
it respects the minimal measurements set by the European norm (the entrance in fact is 900 mm to allow a comfortable transit also to people with physical disabilities)
it is a "half portal", designed to be installed outside of already existing doors (whether they are traditional ones or sliding automatic doors).
it has optimal integrability with the biometric systems. The installation of metal detector device is not advisable.
|
|
The Duotour is a 2-wing revolving door with spacious compartments able to easily accommodate large objects such as wheelchairs, stretchers, shopping and luggage trolleys.
The Duotour provides simple, bi-directional, straight-line access and has a high capacity throughput of people. The Duotour's unique design transforms an ordinary entrance into an environmentally friendly and attractive entrance.
Central Door Wings
All Duotour models include central doors within the two-wing door set. These central doors can be used for emergency escape purposes or left open when the full environmental benefits of the revolving door are not required.
The AC Duotour model uses break-out swing doors to provide the maximum possible clear width and the AS model has automatic sliding doors. This allows the Duotour to be used as a fully automatic revolving door, an automatic sliding entrance or to be left completely open as traffic flow or special circumstances require. All things considered, the Duotour is without doubt the most versatile entrance solution that money can buy.
Numerous Application Areas
The variety of configurations available enable us to offer you a suitable high capacity entrance solution for almost any building. You will often find the Duotour revolving door in hospitals, banks, hotels, airports, supermarkets and many types of public and office buildings.
|
|
The Tournex is a sophisticated automatic revolving door with spacious compartments. The Tournex is easily able to cope with intensive pedestrian traffic flow while protecting the building environment from draughts and adverse weather conditions.
With a range of diameters available up to 7400mm, the Tournex is large enough to safely accommodate shopping and luggage trolleys, wheelchairsand stretchers , making it a truly impressive and versatile entrance solution.
3 or 4 Door Wings
The Tournex automatic revolving door is available with 3 or 4 door wings. The 3-wing models offer more compartment space for greater user comfort and easier passage for large items. The 4-wing models provide wider throat openings which allow a more efficient two-way traffic flow and a balanced appearance. All Tournex door sets are collapsible to provide wide escape routes in the event of a fire or other emergency.
High Capacity Entrance Solutions
The variety of configurations, large diameters and design options available with the Tournex enable us to offer you a high capacity, energy efficient entrance solution for almost any building. You will find the Tournex installed in supermarkets, hospitals, airports and hotels all over the world.
|
|
The Twintour is a unique revolving door concept with an unprecedented passage capacity. The Twintour revolving door provides bi-directional, straight-line access and easily accommodates large objects such as shopping trolleys, luggage trolleys, wheelchairs and stretchers.
The Twintour combines the highest possible capacity and ease of use with maximum flexibility. Boon Edam offer a modular revolving door concept which allows us to design this high capacity entrance that meet your individual requirements.
Flexible Concept
The Twintour is a flexible revolving door concept which consists of two or more 2-wing revolving doors which are connected with one another via an existing or specially constructed corridor. Courtesy of the specially developed synchronous drive, the 2-wing revolving door sets rotate at right-angles to one another, this ensures that the entrance is always draught proof.
High Capacity Entrances
The variety of design options and configurations available with the Twintour enable us to offer you a high capacity entrance solution suitable for almost any building. You will often find our Twintour revolving doors in airports, railway stations, hospitals, large office complexes, supermarkets and shopping centres.
Cost Savings
The Twintour is one of the most economical doors in the entire range of Boon Edam revolving doors in terms of the energy it consumes and the energy it saves. In many instances, a Twintour will pay for itself within a couple of years.
|
|
The Tourniket is a high quality revolving door with eye-catching features. Its unique design combines architectural beauty with the highest degree of flexibility. From saving energy costs to the use of intelligent safety features, every aspect of this revolving door is designed to fulfill the needs of our customers.
|
|
The Crystal Tourniket automatic revolving door is a modern and stylish entrance solution which uses a combination of laminated and toughened glass to reduce the traditionally framed elements of the door to a bare minimum. The Crystal Tourniket is a virtually transparent door that is ideal for use with contemporary glass facades while still blending in beautifully with more classical architecture.
Functional and Stylish
The Crystal Tourniket automatic revolving door is available with 3 or 4 door wings in a wide range of sizes and design options. With the choice of coloured or clear glass and the option of night locking doors, the automatic Crystal Tourniket is a truly versatile entrance solution that is both functional and stylish.
Versatile Entrance Solution
The variety of configurations and design options available make the automatic Crystal Tourniket the perfect choice for medium traffic flow applications in buildings such as offices and hotels.
|
|
The high security interlocking door
The Circlelock is a circular interlocking door system that prevents unauthorised entrance to your secured area. Several verification systems are available to detect piggybacking and reach the highest possible security level at your entrance. The Circlelock can be customised for a stylish integration into your buildings architecture.
Two curved sliding doors
The Circlelock consists of two sliding doors, which will open one after the other, creating an interlocking security booth. The Circlelock is a bi-directional security door allowing entry and exit in turn.
High security entrances
Our Circlelock is to be found in areas where a high level of security has to be balanced with ease and speed of operation. With a Circlelock, surveillance by a third party, such as guards, is no longer necessary. You will often find our Circlelock in government buildings, banks, airports and corporate offices.
Security systems
Several security systems are available with the Circlelock to verify the authorised user in the door:
StereoVision
Weight system
Two-zone contact mat and sensor systems
One-zone contact mat
|
|
|
Our Tourlock security door allows a continuous flow of authorised people whilst ensuring that unauthorised people cannot enter. This high security door is designed to integrate with different kinds of authorisation systems, such as card readers and biometric systems. With a choice of several sophisticated security systems, the Tourlock establishes the highest level of security at your entrance.
|
|
Unmanned entrance with high degree of security. Trouble-free operation and simple mechanism makes this product suitable for many field of applications. The product range can be combined with keypads, code locks, card readers, biometrics devices or other access control devices.
Standard and optional features:
Design
Manual TurnStile with silent operation for internal installation
Casework in stainless steel with clear laminated glass panels and rotors in toughened frameless safety glass
Ø1500/1600 mm and unit height 2420 mm
Wide selection of materials and designs
Function
Normally Closed (N/C) or Normally Open (N/O)mode
Sensor in turnstile ceiling, preventing fraudulent use
Safety configurations for power failure or emergency situations
Cardreader, push button control integration
|
|
The C5R - Cilindro Robota R portal is equivalent to the Standard version model C5-Cilindro Robota (except for the flush mount to the floor base and the available options).
The C5R - Cilindro Robota R is absolutely unique.
Developed in our R&D Laboratories, it is one of the most prestigious Alluser Portals.
Characteristics:
it offers the optimal solution for those who need a Secure Portal in very small places (i.e. the corridors).
by buying this model, you will have two of the most important elements: control of the access and the emergency exit.
the emergency exit incorporated in the structure of the Portal, represents an important innovation in this industry. The Portal contains an emergency no panic shackle door; however this door does not have the standard dimensions. In order to reach them, Alluser has devised a system based on the complete automatic opening of the doors of the portal (see the table) through the activation of the emergency no panic shackle door.
The structural characteristics of the C5 do not allow the installation of metal detector; whereas this Portal fits perfectly with the innovative and advanced biometric technologies.
|
|
From the evolution of the E3-Maxi merged with the design of the Cylindrical Line, Alluser created C3-Cilindro Maxi. It is a model with the main characteristics of the E3 and, at the same time, those of a Cylindrical one.
C3-Cilindro Maxi:
is perfect if you are looking for a roomy, large Secure Portal
allows the transit to 4 or 5 people at the time or a wheelchair for people with disabilities.
is a refined and modern product which gives prestige to the entrance
Transparency of the structure, 80% of which it is constructed from glass, is amplified by the dimensions of the portal.
In the case of installation on an upper floor, the K version (C3K - Cilindro Maxi K) is suggested. If you want to know which options are available for the C3K-Cilindro Maxi K, please go to the end of this page.
In addition, this model is also available in the R Version (=Flush Mount to the floor Version) and KR Version (Kit+Flush Mount to the floor Version).
|
|
Like the model HPJ 140, the FPJ 140/2S is a "half portal", but this model contains 2 automatic sliding doors (referenced by the 2S, at the end of the name).
Characteristics:
it respects the minimal measurements set by the European standard (the entrance in fact is 900 mm to allow a comfortable transit also to people with physical disabilities)
It has a very good integrability with the biometric systems.
NEW*! Now avaialble with the Metal Detector!
|
|
C4-Cilindro Bibussola has the main characteristics of the E4-Bibussola and, at the same time, those typical of the Cylindrical portals.
C4-Cilindro Bibussola in fact:
is equivalent to the E4 in Cylindrical style
represents a product able to satisfy the aesthetic requirements
allows the transit of an elevated flow of people
we suggest such a model if you wish to install 2 Secure Portals, but you do not have enough space: such a model allows the installation of 2 Secure Portals by saving at least 240 mm room.
|
|
FPJ 140/1A
(Half portal + swing door)
The FPJ 140/1A is very similar to the HPJ 140, but it contains a manual door.
Characteristics:
- it respects the minimal measurements set by the European standard (the entrance is 900 mm to allow a comfortable transit also to people with physical disabilities)
- it has a very good integrability with the biometric systems; the installation of the metal detector device is not advisable.
|
|
As you would expect from the revolving door market leader we have developed a revolutionary door called the Flowslide, a high-tech combination of a revolving door and curved sliding panels. The Flowslide offers a complete physical separation between two crossing passenger flows on a single floor.
|
|
DITEC automatic doors
A sign of distinction
Comfort, safety, prestige, hygiene, appeal, access control and, in the case of air-conditioned areas, optimised energy consumption: these are just some of the advantages that you can have from an automatic door.
DITEC is a leading manufacturer of these functional and useful automations.
Today's life has made it more and more frequent and common to find doors that open when we get near them. Thanks to cutting-edge technology, superior quality of processes and materials, our automatic sliding doors, opening and closing smoothly and trouble-free, not only give the building something more in terms of look, novelty and appeal but they also make the life of the people using them more and more comfortable.
This is why having an automatic door is not only a question of image and adaptation to advanced technical solutions, it is also a sign of care for the people that come and go, in that it makes their life easier.
Automatic doors also provide an useful means to solve problems arising from architectural barriers.
DITEC constant commitment to study new solutions and offer the widest range of products to meet any customer requirement are a tangible reality.
|
|
DITEC automatic doors
A sign of distinction
Comfort, safety, prestige, hygiene, appeal, access control and, in the case of air-conditioned areas, optimised energy consumption: these are just some of the advantages that you can have from an automatic door.
DITEC is a leading manufacturer of these functional and useful automations.
Today's life has made it more and more frequent and common to find doors that open when we get near them. Thanks to cutting-edge technology, superior quality of processes and materials, our automatic sliding doors, opening and closing smoothly and trouble-free, not only give the building something more in terms of look, novelty and appeal but they also make the life of the people using them more and more comfortable.
This is why having an automatic door is not only a question of image and adaptation to advanced technical solutions, it is also a sign of care for the people that come and go, in that it makes their life easier.
Automatic doors also provide an useful means to solve problems arising from architectural barriers.
DITEC constant commitment to study new solutions and offer the widest range of products to meet any customer requirement are a tangible reality.
Automatic pedestrian doors - TEN
Automatic architecture.
It is becoming increasingly common today to design buildings with technological facades.
The automatic facades that closely monitor entrances and control the effect of the outdoor climate obviously have
to blend in with the technological structures and be of appropriate quality.
Ten is the new DITEC automatic system that has been designed to meet these new architectural and applicational needs.
|
|
Shopping Centre Darmstädter Hofzentrum, Heidelberg
|
|
FPJ 140/2HP
With its innovative and winning aesthetic design, the FPJ 140/2HP is very different from the other portals because of its elliptic shape, far from the classic square ones or the soft cylindrical structure of the tube style line.
Characteristics:
- It is made up of 2 HPJ 140 units, connected by a central element with variable dimensions.
- It allows a high throughput, thanks to its dimensions [1220 x 1750 (variable) x (h) 2060 mm].
- Very good the integration with the A.P.D. System
- It respects the minimal measure previewed from the European Standard (the entrance in fact is 900 mm to allow a comfortable transit to people with physical disabilities).
- High flexibility: FPJ/140 2HP is in fact the first one of a new generation of Secure Portals, where the Customization is very important. In fact a central modular element (see the golden part in the picture) makes the length of the door variable, to satisfy your needs.
In case of important dimensions, such variable infill can be made of glass.
|
|
The C1-Cilindro Standard has all the characteristics and the advantages of the Cylindrical Series: aesthetic design, elegance and transparency. These are the elements that have made it a very successful product.
Here are the characteristics of C1-Cilindro:
the transparency reduces the feeling of claustrofobia
it is an elegant, modern and refined product which gives prestige to the surrounding environment.
easy installation.
the space occupied by this cabin (as in general the Cylindrical Series) is shared between the external and the internal wall at 50 %.
|
|
Our Circleslide is a curved automatic sliding door that gives a sensation of space to those entering it. Incorporating self-learning technology, our Circleslide offers extremely smooth and quiet movement. The door provides enough space for people pushing prams or trolleys, carrying luggage and people in wheelchairs. The soft arc appearance and transparent design make the Circleslide an impressive and stylish entrance. The Circleslide can be perfectly integrated into any type of architecture.
|
|
Designed to offer every shop owner an effortless outside display.
The exceptional originality of this window's opening process :
with no ground clearance
with disengageable electric drive
offers an evident supremacy over classic existing systems (sliding or foldable).
Adaptable to every situations (shops or homes), this store window can be supplemented with a mobile display, also electrically driven, designed specifically for each type of merchandise.
|
|
|
|
Commercial buildings: automatic doors
