|
|
Scotch brite Fasteel no finger prints. Metallic grease
filter, removable and washable. Carbon filter. Electronic
optical control. |
|
Award-winning high-performance designer hood
This stylish designer cooker hood won the Red Dot design award 2003 for its stunning looks. Its unique design gives optimum use of cooking space as well as perfect extraction. The hood features wall-mounted extraction vents which operate just 30cm above the hob, removing cooking vapours directly from your pots and pans whilst maximising cooking space and headroom. Three halogen lamps are provided for brilliant hob illumination, with a dimmer facility for softer lighting. Extraction speed, filter and light settings are all controlled via an electronic control ball with varied colour display. |
|
Dimensions: 1200 X 700 X 900 mm
Composition of the model presented:
1 basin of fires sharp gases
1 plate shot
1 plancha gas
1 oven gas GN 2/1 of 8 kw
1 wall cupboard with drying oven
1 matched extractor
Completions: enamelled coating and framings brushed stainless |
|
Dimensions: 1200 X 700 X 900 mm
Composition of the model presented:
1 basin of fires sharp gases
1 plate shot
1 basin of fires sharp gases
1 oven gas GN 2/1 of 8 kw
1 wall cupboard with drying oven
1 matched extractor
Completions: enamelled coating and framings brushed stainless |
|
Classic Chimney Hood
90cm & 120cm Extraction Hoods
A Rangemaster cooker hood will help you enjoy your cooking to the full by quickly carrying away cooking odours and steam whilst being easy to clean. The classic hoods are designed with our Elan and Classic cookers in mind. They are finished in matt black and are available in either chrome or brass effect trim. They reflect the styling of these cookers by adopting the same towel rail as used on the cookers to coordinate beautifully with your kitchen.
Key Features
- Comes with an attractive rail in Chrome or Brass
- Available in 90cm and 120cm widths
- Three speed fan and integral downlighters
- Can be set to recirculate or vent externally
|
|
• Multispeed, electronic push-button control features stylish, rounded buttons with individual speed indicators.
• Delay timers control automatically shuts off unit after 10 minutes.
• Control light flashes when it's time to clean the filter.
• Two-level lighting provides bright cooktop illumination and a low nighttime setting.
• Two 20-watt halogen lamps included.
• Ducted telescope flue accommodates ceiling heights from 8 to 9 feet. Extension flues for higher ceilings are also available for ducted applications.
• Install hood so that the bottom of the unit is 24 to 30 inches above the cooking surface.
• Dishwasher-safe aluminum filters feature a quick-release latch and professional-style appearance.
The delightful, hand-crafted design blends curved and angular surfaces to form a stunning union of stainless steel and glass. The 65000 Series' 450 CFM centrifugal blower is combined with an advanced, multi-speed electronic control featuring a convenient 10-minute delay shutoff.
|
|
Unique and inimilalble, emblem of BamViera Cappe, has been created in 1996 and nowadays is still Ihe most desired, it won the prize (or design and aspiration. VANINI: the cookerhood is a cut above.
Hood structure:
aisi 304 BA scotch-brite stainless steel and glass - Easy cleaning, mirror effect
Technical features:
230 V~50Hz extra-silent tangential motoriniith a high extraction capacity, removable and washable metal grease filters, optional carbon filters
Lighting:
20W halogen lights
Installation accessories:
supplied
Packing:
double wall corrugated board box plus shaped foam polystyrene.
|
|
BT88.1GL
90cm Glass chimney hood
Twin high extraction tangential motor
Pushbutton control operation
3 Speeds
1 Metallic grease filter
2 Halogen lights
Extraction capacity: 600 m3/hr
Optional extra:
2 x C1 Metallic grease filters for air re-circulation
If ducting to the outside, a 125mm diameter ducting kit (DK5 or DK10) is required.
|
|
| Extractor for aspiration or I recirculate, electronic Commandos to retroilluminati diode valves, 4 levels of power, deferred Arrest automatic rifle, Power of the maximum aspiration 700 mc/h, washable metallic Filters antifat, Lighting with 2 halogen lamps from 20W, sonorous Pressure 42 dB (A) to the first level, Flange of escape diam. 150 milimeter, Consumption of the motor 135W, Available in the colors: X inox. |
|
A differentiated range of suction hoods with an exclusive design (ceiling, wall, incorporated ...) will satisfy diverse performance needs, adapting to all type and compositional solutions, with extensive personalisation possibilities.
|
|
90 cm
KGS90HI
1 motor
3 speeds
2 Halogen lights (2x20w)
Aluminium Panels
Charcoal filter
Suction power of 900 m3/h
High-Tech motor
KGS90HI (stainless steel)
|
|
DKGO600E
Product family Hood
Construction type Wall hood
Dimensions (W×H×D) 600×250×500 mm
|
|
DK2000P2
Wall hood
Equipment:
- Venting with recirculation
- Grease filter from washable stainless steel
- 4 venting stages
- 1 motor |
|
60cm Chimney Hood with Glass
Electronic Controls
Booster
Illumination - 2 x 20W Halogen Lights
2 Autosupporting Metal Filters
Noise Level at Max Power: 65dB(A)
620 m³/hr Output |
|
Width 700 mm
Electronic controls with LED's
Intensive setting - auto switch-off after 10 min
Halogen lighting with dimmer function 2 x 50 W
Stainless steel grease filters: 2
Light switch with LED |
|
Halogenous lighting:
It brings a powerful, natural and diffuse luminosity on your plan of cooking
Indicator of saturation of the filters:
An indicator ignites when the filters need to be cleaned (grease filters) or replaced (filters coal).
Time-lag stop:
This function differs the stop from the hood of a few minutes after the end of cooking to allow a total evacuation of smoke.
|
|
Dimensions
Width of the product (cm): 59.9
Height of the product (cm): 86.0
Depth of the product (cm): 51.5
General characteristics
Greaseproof filters: Stainless monopiece
Lighting: neon X 11 W
Diameter of the tube (mm): 120
Prestazioni
Flow (m ³ /h): 700.0
Speeds: 3
|
|
HNI54YS
54" STAINLESS STEEL CHIMNEY-STYLE ISLAND HOOD
> POWERFULLY QUIETTM OPERATION
> EASY-TO-CLEAN TOUCH-PAD CONTROLS
> DISHWASHER SAFE FILTERS
BUILT-IN CLEAN FILTER REMINDER INDICATOR LIGHT
HIGH-HEAT SENSOR AUTO START
DELAYED SHUT OFF
MAY BE USED WITH PROFESSIONAL SERIES COOKTOPS OR RANGES
600 CFM, 1000 CFM OR 1300 CFM REMOTE BLOWERS AVAILABLE
|
|
EPH18/EP18 · Euroline Pro
The Euroline Pro Series is boldly designed to cover light residential, "commercial type" cooking equipment. This model is available in a 24" or 27" standard depth. To order a 27" depth, add an 'X' after 'EP' in the model number. The Euroline Pro is also available with a 26" wide x 14" deep top to allow for higher CFM requirements. Heat lamps are not available on this model. Below is a list of our base model numbers for standard sizes, simply select the model you need, and then specify the finish (painted, stainless steel, real brass, real copper, or hammered copper). Shown with matching wall mount duct cover (sold separately), available in standard sizes for 8', 9', and 10' ceiling heights or in custom sizes. All Vent-A-Hood products are suitable for use in damp locations (outdoor applications such as a covered patio) when installed in a GFCI protected branch circuit.
|
|
NPH9/NP9 · Nouveau Pro
The Nouveau Pro Series features a modern canopy designed with a rounded front lip. Heat lamps may also be added to selected models. Below is a list of our base model numbers for standard sizes, simply select the model you need, and then specify the finish (painted, stainless steel, real brass, real copper, or hammered copper). All Vent-A-Hood products are suitable for use in damp locations (outdoor applications such as a covered patio) when installed in a GFCI protected branch circuit.
|
|
| The Nouveau Pro Series features a modern canopy designed with a rounded front lip. Warming light bar (bulbs not included) is standard with this hood (it may also be ordered without the warming bar upon request). Warming shelf assembly (shown, sold separately) mounts to the wall underneath the hood, click here for more information. Below is a list of our base model numbers for standard sizes, simply select the model you need, and then specify the finish (painted, stainless steel, real brass, real copper, or hammered copper). This model is available in a 24" or 27" standard depth. To order a 27" depth, add an 'X' after 'NP' in the model number. Shown with matching wall mount duct cover (sold separately), available in standard sizes for 8', 9', and 10' ceiling heights or in custom sizes. All Vent-A-Hood products are suitable for use in damp locations (outdoor applications such as a covered patio) when installed in a GFCI protected branch circuit. |
|
Stainless steel island hood featuring a stylish cylindrical design and 4 speed levels and an intensive setting.
Stylish and innovative
A stylishly designed hood combining brilliant design with stunning good looks.
Speed and performance
Zanussi-Electrolux hoods offer you a choice of 3 or 4 speed levels, with some offering an intensive setting.
Perimeter extraction
Through clever use of technology, this cylindrical hood offers you quieter operation.
|
|
36"/30" Chimney HoodPHW / PHG36 / PHG30
Silent and sleek, powerful yet chic. Engineered to draw the air and designed to draw the eye.
Main Features
-Wall-Mounted Ventilation Hood
-Electronic Controls include:
-Adjustable 4-Speed Fan
-Timer
-Illuminated Key Pad
-1 Halogen Light (50 W)
-2 Easy-to-Clean, Dishwasher-Safe Mesh Filters
-19 1/2" Deep, 8" Round Exhaust
-1 Blower (600 CFM) with Electronic Speed Control |
|
|
|