|
|
Kable 12V design Mizar
Extra low voltage system on double electrified wire for elegant lighting solutions. KABLE12 can be installed onto ceiling suppliers or wall, from ceiling to wall as well as on irregular walls. It offers great flexibility and easy installation and use.
Vaste choice of suspended, fixed or adjustable design spotlights. Complete range of accessories and transformers. Finish: polished chrome, mat chrome and gold to satisfy any aesthetic solution.
Technical features
- Choice of not insulated and insulated tinned wire
- Jack adapter for all DOUBLE JACK spotlights
- The ceiling/wall turnbuckles allow installation and tension of the wire with angles from 0 to 180°
- Maximum length of direct line: 10 mt. The system must be supplied with safety transformers fitted with suitable overload and short circuit protection device. It is not advisable to use electronic transformers for this system other than TR-KB300D. |
|
Ray design Afra e Tobia Scarpa
Ray, specifically designed to correctly illuminate works of art. The lighting project for the exhibition of the Carlo Crivelli poliptych at the Academia Galleries of Venice was the “field test” in wich Ray proved to be particularly suitable thanks to its essential and non invasive design. Ray is available with one to eight lights in the wall, commercial ceiling, pendant, track and floor versions, and it can also be applied in commercial and office spaces, in operative or executive rooms and to highlight architecture.
Technical characteristics
- An extrude aluminium electrified bar wich is ancore to an adjustable glass plate by means of two coaxial joints. The plate can house between one and four swinging and rotating lights
- Precision training and adjustment with respect to the surface. Protection glass and tinted filters available
- Wide light design beam training adjustment flexibility, even independently: 360° vertically, 45° of the glass plate with respect to the base
|
|
Description: Wet Location Spotlight
Finish: Satin
Glass: Linen
Light: 2 Lt x 50w
Voltage: 120v
Bulb Type: Halogen GU 10 110V |
|
| A completely adjustable fixture. Minimal design design. Different lamp furniture types. Designing space with light, guiding and controlling the design beam of light inside each room has become an aspect of paramount importance in fitting out show-rooms, shops, hotels and other public premises. The complete adjustability of this fixture that helps us keep energy consumption down and avoids wasting the diffusion of the light, is achieved thanks to a flexible movement of the fixture on the two axes (vertical and horizontal). The extremely rigorous design of the die-cast body, the super pure aluminium optics, the use of ceramic glass, the possibility of choosing out of 4 different types of lamp and the extreme ease with which it is installed are the fundamental features of the Krono series: a direct expression of Martini quality and research. |
|
INMAX
Spotlight INMAX for 1 halogen capsule lamp furniture 90W QT12 with base GY6,35, 230/12V, direct light emission, aluminium die-cast control gear box, thermo painted black, aluminium die-cast reflector housing, thermo painted metallic silver, encased aluminium reflector, silver anodised, oval beam O Oval, safety glass with black anti-glare baffle ring, full 360° horizontal adjustment, extended vertical tilt up to: 17°/180°/17°, concealed wiring in adjustment arm, incorporated HF electronic control gear, protection class I, adaptor for single circuit track, colour filters and other components can be fitted by accessory support ring, |
|
| FIAMMA: projectors for halogen, dichroic and discharge lamps suppliers. Precision and adjustability. Possibility of 355° horizontal rotation and 90° vertical rotation, thanks the aiming self-locking system. Professional optics subjected to pure aluminium reflective treatment provide clean and precise design beams. Efficiency. The electrical component are separate from the optic unit to optimize heat dispersion, ensuring the lamps maintaining a constant operating temperature. The bayonet system on the whole Fiamma range makes it extremely easy to install and replace lamps, without the need for tools. The possibility of inserting chromatic, UV and corrective filters on the front, or universal chromatic and refractive filters for QR-LP 111 directly on the lamp, offer maximum freedom of expression and design furniture. |
|
Versatile and adaptable
Track-mounted VIVO design spotlights
VIVO S
VIVO M
VIVO L
Three different sized models, designed for innovative light sources and a variety of accessories, make VIVO a highly flexible spotlight system.
VIVO S
• ideal for smaller shops and boutiques with relatively low ceilings furniture
• blends unobtrusively into interio because of compact design furniture
• fitted with the new, ultra-compact CDM-Tm 20 W metal halide light by Philips (equivalent to light output of a 75 W low-voltage tungsten-halogen lamp manufacturers) or with QR-CB 50 W low-voltage tungsten-halogen lamp
VIVO M
• perfect for standard applications in shop windows furniture, retail areas, showrooms etc.
• combining spotlights with flood and spot reflectors ensures highly attractive, accentuated shop window presentation
• fitted with HIT-TC-CE G8.5 35 W or 70 W metal halide lamp or with QT12 100 W low-voltage tungsten-halogen lamp
VIVO L
• model for applications requiring large quantities of light, e.g. rooms with high ceilings, and areas where high illuminance levels are required - i.e. in shopping centres, car dealerships, department stores, supermarkets
• fitted with HIT-CE G12 70 W or 150 W metal halide lamp or with HST GX12 50 W or 100 W high-pressure sodium discharge lamp
• ideally suited for illuminating foods by using special filters and reflectors
|
|
Alaska Triple Square
Part Number:
01019 Alaska Triple square
Gross weight:1.9 Kg Front View
Outer carton quantity: 8 |
|
An handy joint lamp manufacturer. Low voltage 12V for 24V lamp consisting of two conductor rods diam. 4 mm.
Chrome finish. The rods lenght (max 55 cm) can be adjusted with a clamp made of clear plexiglass.This clamp can be attached to either a round or flat surface to a maximum thickness of 60 mm. 50W max. In wall version you can use an innovative transformer in a transparent case
Ceiling and corner versions.A locking system, self-estinguishing ceiling-rose mode of resin. It allows the installation of the lamp at the ceiling with the possibility to adjust the rods up and down. Unlike the traditional recessed spots, this system allow to direct the light on the object that has to be lit up. |
|
SPOT QRB
Reference: 186462
Category: Interior
Site: Ceiling suppliers, Wall
Family: Rails - tended Cable
Range: Cable T.B.T.
Source: QRB 111
Power: 50w
Test with the incandescent wire: 850° IP: 20 Class: 3
Colors available: Chromium plate
|
|
TZ Lighting
The TZ low voltage lighting range from Shopkit offers exceptional flexibility and the unique 'multipoise head'.
Available with connectors for Shopkit's tensioned cable or rod system and 'disc' mountings to enable the positioning of lights on ceiling supplier or panels furniture with remote siting of transformer - using either rotating or multipoise heads.
|
|
TZ Lighting
The TZ low voltage lighting range from Shopkit offers exceptional flexibility and the unique 'multipoise head'.
Available with connectors for Shopkit's tensioned cable or rod system and 'disc' mountings to enable the positioning of lights on ceiling manufacturers or panels furniture with remote siting of transformer - using either rotating or multipoise heads.
|
|
Led spot for external. Body in anodized aluminium obtained from a billet to
optimize heat dissipation, gasket for protection against dust and water, tight cable gland in metal. The projector furniture is equipped with 6 Led Luxeon K2
700mA (18W tot.) high emission, internal driver at 10/30V DC. This driver
is able to adjust the drop of tension in case of longest cable using 24V DC
feeders. Optic with 6 lenses 10/25/40° beam fixed on eletronic circuit,
protective glass and threaded ring in aluminium. Recessed box in synthetic
material to install the spot in concrete. IP68. |
|
Led spot for exterior. Stainless steel body. Obtained from a round billet to optimize the heat dissipation, gaskets to protect against dust and water infiltration and waterproof metal gland. Led 3W 1W 350mA high emission, optic with triple lens with optic 25/30°, glass protection and screw lock nut. Stainless steel drilling brackets to fix and adjust the spot. IP 68 allowed to protect the spot in case of water dipping. The spot can be fixed using the accessories, wall/ceiling (for an easy maintenance) and peg for the ground.
|
|
Led spot of small dimensions for internal use. Aluminium anodized body,
obtained from a round billet to optimize the heat dissipation. Led 3W 700 m
high emission, I.R.L. optic with lens 60° and threaded ring. Stainless steel
bracket to fix the spot and adjust it. IP40. |
|
NEW PRODUCT 2007/2008
LED Spot light for bed furniture side.
To be inserted into a wood panel furniture.
Delivered with a 3 Watts (equivalent 40 W) LEDlight white warm light (3000° K).
Narrow beam to allow confortable reading .
For bed side use.
Price quoted for 1 spotlight with one miniature (15mmx30mmx45mm) electronic transformer.
50 000 hours.
Available from October 2007 in a black and nickel bright finish with or without switch.
Please note: To be fixed into a wooden panel.
|
|
Spot LED - small delight
Featuring an innovative light emitting diode, the Spot LED is a real revolution in accent lighting. With an adjustable projector furniture head of only Ø 31mm, this is an incredibly small luminaire.
It incorporates the LUXEON® K2 high power LED, which delivers more light than ever before and has no UV/IR radiation. Spot LED is available as a complete range - surface mounted, recessed, track mounted and wall mounted. |
|
| Completely adjustable multi-lamp fixtures. The Wipp range is created with exactly the same great installation flexibility and use as the Witra series of products, characterised by a double aluminium ring to support the light source. The glazed grey finish of all the parts of the product contribute to increasing still further the lightweight characteristics from an architectural point of view, which makes it suitable for almost all applications. |
|
Recessed lamp suppliers which provides direct light, supplied with safety extra low voltage halogen bulb. The diffuser is in hand-shaped blown borosilicate glass and available in four different shapes (Luna, Pianeta, Sole, Stella) in clear or frosted finishings.
Design design: Design Tanzi
|
|
Zadora (adjustable)
Recessed adjustable downlights for MASTER Line 35 mm, MASTER Line ES dichroic halogen lamp with beams of 8°, 24°, 36° and 60° and Twistline Alu lamps suppliers. Available in white, chrome, gold, brushed aluminium, black, matt satin, metal grey, and black nickel. Ready-to-install kit versions (downlight, lamp, transformer) available for 12 V/50 W MASTER Line lamps in electromagnetic Class I, Class II, and HF Class II. Kit range also includes a 230 V Twistline Alu version. Kits are available in white, chrome, gold, and brushed aluminium. |
|
Dichroic Lamp manufacturers - GX 5.3
P.maxi : 20 to 50W / 12V
Class 3 / IP20
Diameter : 11 cm
Height : 4 cm |
|
| High vacuum metalization. Control of the light emission for environments with VDT. Decorative rings with various finishes. Electromagnetic, electronic controls gears and circuits for the emergency device. Light is an integral part of architecture. The Eco range has been created to offer, thanks to an accurate control of the light emission, a better quality light to avoid direct and reflected glare phenomena. Eco is further enhanced by rings with which the best solution for each type of environment can be created. This lighting fixture - in all its different configurations - becomes flexible instrument in the designer’s hands. |
|
| BOB: design design by Daniel Bernard. A new generation of downlights for dichroic lamps furniture, BOB combines the functions of the best fixed and adjustable fixtures: low luminance bezel; quick lamp replacement, without the need for disassembly or tools; locking on selected positions; automatic locking of the vertical position for use as a fixed appliance. |
|
design design Co Twee for Dark
Standard colors: chrome, white glossy, black glossy, each ral-color
on request |
|
|
|
Spotlights, Projectors
