|
|
The only sloping partition that tilts on and off its axis
TWIN interior partition range introduces TWIN SLOP, the only system allowing the manufacture of sliding-sloping partitions and doors ON AND OUT THEIR AXIS, without any angle limits. The detailed knowledge of technical and performance problems of movable partitions allowed Akustiksystem to develop Twin Slop: aesthetically high-tech solution allowing the creation of unusual layouts, where plastic features perfectly combines with visual elements.
Twin Slop adds to the nice look of a new creation the ELIMINATION OF SOUND REVERBERATIONS due to its intrinsic technical features. TWIN SLOP features high-tech look and is the only movable partition sloping in and out its axis. The plastic look and the perfect co-planarity of the visual elements and the challenging and creative set combined with the technical performances improve the elimination of sound reverberations. The design becomes increasingly in line with times and gives the project further modernity and elegance. |
|
A partition with extreme flexibility. An integrated suspended ceiling with high technological value and a raised access floor linked all together in a unique aesthetic bonding. A system that sorts out all the problems linked to the project with major benefits in the management and economical aspects as well as improvements in the acoustical comfort.
The components of the integrated system can be used individually.
The technical and aesthetic features of the system (particularly the ceiling), reflect how adaptable the system is and how it can be integrated and introduced to any pre-existing environment in harmony
Innovation on three levels
1. Chilled ceilings
2. Plant engineering
3. Acoustic performance |
|
walls system, hinged doors and sliding doors with hidden support sections
A system which as part of its developmet was planned to achieve as much simplicity as possible. This technology was refined to remove every kind of visual technical complication and all connecting elements "disappear" from view producing walls which merge invisibly into the floor and suspended ceiling.This architectural vision deliberately planned by removing unnecessary detail aims to reclaim the pure essence of architecture. |
|
Movable partition bi-bloc* in independent steel walls
Glazing framed or stuck in simple or double glazing, with or without blinds.
Flexibility of the bi-block for the dismantling - reassembly and the input of various networks during the initial implementation or later.
Télécharger la fiche Fleche Télécharger le fichier
format pdf Format PDF format pdf Format RTF
slide someta
Possibility of different tint by face of partition.
Fire-proof performances: incombustible partition (A2 under new Euroclasses standards)
The SOMETA FH-R 95 movable partition ideally dresses your offices by supplying an aesthetic, evolutionary and successful environment. |
|
Lightened wall
• All dimensions (height and width) possible
• Thickness 150mm
• Panels for modules made of glass, plexi, alu,…
• Possibility of smooth light or accentuation of lines
• Number of lamps in function of the measures and the desired light effect |
|
Modular system to build self standing illuminated partitions up to 5 m high.
Micro cables are used to hang frames, shelves or led screens.
Available for purchase or for hire. |
|
Solid panel | Aluminium lacquered
Two metallic shades : silver (equivalent to RAL 9006) and titanium (equivalent to RAL 9007). |
|
| Acrylic paint : 26 bright, pastel or neutral colours to be chosen. Any other shade can be achieved after matching of samples by our painters. |
|
The best way to present Comar is to show some of the solutions adopted for the different types of clients who chose to use our advisory services and our products.
The quality, flexibility, care and experience acquired over time enable Comar to act as ideal partner for the solution of problems related to the partitioning of work floors and for the creation of smarter, more functional and more people-friendly environments. |
|
The best way to present Comar is to show some of the solutions adopted for the different types of clients who chose to use our advisory services and our products.
The quality, flexibility, care and experience acquired over time enable Comar to act as ideal partner for the solution of problems related to the partitioning of work floors and for the creation of smarter, more functional and more people-friendly environments. |
|
General technical features
The internal framework is constructed of uprights, rails and transoms using the same galvanized steel section, designed for clipping on the panel joint cover strips. The framework assembly is accomplished using special snap-fixing plates that can be used to compensate for any unevenness between the floor and ceiling. External infills are formed of double 12mm thick melamine faced panels, fitted to the elevations using extruded aluminium cover strips, giving a wall thickness of 80mm. Frames for glazed panels and doors are in rounded section extruded aluminium, powder coated or anodized. Glazing is in laminated glass, 3+3mm thick.
The blank panels are filled with 50mm thick, low bio-resistance, water-repellent glass wool, treated with thermosetting resin. The glass wool is incombustible, asbestos free, does not produce toxic gases in the event of fire and is faced on both sides with poly coated KRAFT paper (density 40kg / m3).
The doors can be provided solid or glazed and double or single leaf. These are flush doors, 40mm thick, faced in plastic laminate. The clear opening size is 890mm wide x 2,110mm high. The frames are made of painted or natural aluminium. They are fitted with HEWI hinges and push and open door knobs. The internal framework of the partition allows cables to be run both horizontally and vertically and switches and sockets can also be incorporated.
Access to services is possible simply by removing the demountable panels. |
|
General technical features
The partition wall has an overall thickness of 100mm and has two standard module sizes in the vertical; 511 and 1,022mm while in the horizontal, standard module sizes are 1,022, 1,533 and 2,044mm with any intermediate dimension made to measure. The internal framework of the partition consists entirely of 65 x 22mm metal box sections with holes specially formed in the uprights to accommodate the transoms, to ensure rapid and sturdy assembly.
The uprights, housed in purpose made "U" section guides at floor and ceiling level, are fitted with adjustable feet, enabling the frame to be perfectly fixed and leveled.
The panels and plinths are 18mm thick, melamine faced, perimeter edged in 1mm PVC and fixed with brackets to the uprights, fully enclosing the framework; the latter is fitted with 6mm PVC gaskets between each panel, for infill purposes as well as appearance. Panels are demountable, to provide access to the cavity. The partition is supplied complete with stops and compression seals to improve the level of sound absorbency. Glazing frames are in aluminium, rounded for single glazing but flush with the partition for double-glazing and complete with soft PVC gaskets.
Glazing, both clear and acid etched, is toughened 3+3mm laminated glass complying with current regulations. The blank panels are filled with 50mm thick, low bio-resistance, water-repellent glass wool, treated with thermosetting resin. The glass wool is incombustible, asbestos free, does not produce toxic gases in the event of fire and is faced on both sides with PE coated KRAFT paper (density 40kg / m3). |
|
| Ventura Open is the office partition which can also be used as a panel wall or a cladding wall in. for example, reception areas or meeting rooms. Like the other products in the Triplan system. Il can be fully integrated Into these products - and relocated. The appearance of Ventura Open walls can vary a lot, depen-ding on the width, height and type of panel surfaces; however, it never |
|
Despite its minimalistic design, Ventura is a genuine, relocatable office partition in line with other products in the Triplan system. Since this relocatable office partition has no sections, each individual module can be demounted and replaced with,for example, glass or door modules.
Ventura is a relocatable office partition with a discreet V-section in the module joints, thus ensuring a modern, plane wall. |
|
| The SOMETA’s movable partition of conception bi-block with framework allows the complete use of the in-between facings space for the installation of any types of fluids. |
|
The frame is composed of uprights and intermediate profiles made from galvanized steel. Melamine-faced particle board panels (TecnoSpace collection) are invisibly secured to this frame by means of a unique retainer system. This produces a flat wall with minimal 'V pencil junction.
The internal cavity is filled with mineral wool to improve the acoustical and thermical insulation.
The frame of the glazed wall is assembled on site. After this, prefabricated shop-assembled double-glazed window units are fitted in the frame. |
|
|
|
Various removable partitions
