|
|
|
|
|
|
The patented system of doors with flush wall closures that can be used to create any type of cupboard, wardrobe or closed space, hide cables or camouflage any other disturbing feature.
The L’Invisible system- Special Closures is made of
• A nucleus structure in extruded aluminium alloy 6060T5 (anticorodal 063), to build -in, that substitutes the casing (soffit-jamb), so that the panel/door may be perfectly aligned with the plaster thus eliminating frames. The structure is very strong and adaptable to any wall depth; it is supplied with perimetral rests that facilitate the positioning in the wall.
• A 19mm MDF wood panel, type “BH”, improved with 7010 (colour white) predisposed for glue / paint.
The L’Invisible system Special Closures product line is based on the concepts of originality and specialization. Made to measure doors and panels can be created to carry out different functions and satisfy different tastes.
The L’Invisible system Special Closures product line can be used to close everything inside and outside the interior space.
|
|
|
|
|
|
Intro
The EX/TC access panel is designed for use in suspended ceilings that consist of a clip-in metal tile and spring tee system.
Construction
Constructed by converting Burgess, Armstrong or other metal pan ceiling tiles into a hinged access unit, and is secured using a budget lock. Other locks are available upon request. The panel door uses the back of the spring tee section as an anchor to support the hinge system. This panel can support more than one tile. For multi-tiled panels it is advisable to contact our technical department.
Fitting
The slotted hinge brackets are designed to clamp loosely onto the top of the spring tee section on the side to be hinged. Correctly align the panel in the ceiling aperture, then tighten the hinge brackets. When closing the access panel use the budget lock key as a handle; swing the door upwards on the hook hinge as far as possible without touching the ceiling, then slide the door backwards toward the hinge side. The panel will then be in the correct position to be locked over the tee section.
|
|
Standard Ceiling | ADS SB
Product Code: EX/ADS/SB
Specification
Construction: ADS Beaded frame with Metal door
Orientation: Ceiling
Fire Rating: Not Rated
Acoustic Rating: Not Rated
|
|
Standard Ceiling | PB
Product Code: EX/PB/SB
Specification
Construction: Beaded frame with Plasterboard door
Orientation: Ceiling
Fire Rating: Not Rated
Acoustic Rating: Not Rated
|
|
Standard Ceiling | ADS PF
Product Code: EX/ADS/PF
Specification
Construction: ADS Picture frame with Metal door
Orientation: Ceiling
Fire Rating: Not Rated
Acoustic Rating: Not Rated
|
|
Standard Ceiling | ADS PB
Product Code: EX/ADS/PB/SB
Specification
Construction: ADS Beaded frame with Plasterboard door
Orientation: Ceiling
Fire Rating: Not Rated
Acoustic Rating: Not Rated
|
|
Standard Ceiling | PF FD (up to 600mm)
Product Code: EX/MT/PF/FD (<600)
Specification
Construction: Picture frame with Metal door
Orientation: Ceiling
Fire Rating: 60 minutes
Acoustic Rating: Not Rated
|
|
Standard Ceiling | EG
Product Code: EX/EG
Specification
Construction: Recessed frame with To Take Fibre Tile door
Orientation: Ceiling
Fire Rating: Not Rated
Acoustic Rating: Not Rated
|
|
Standard Ceiling | PB FD
Product Code: EX/PB/SB/FD
Specification
Construction: Beaded frame with Plasterboard door
Orientation: Ceiling
Fire Rating: 60 minutes
Acoustic Rating: Not Rated
|
|
|
Designed to fit into any type of ceiling system, allowing easy access into the cavity/void where regular maintenance to services is required to be carried out.
|
|
Standard Ceiling | ADS PF FD
Product Code: EX/ADS/PF/FD
Specification
Construction: ADS Picture frame with Metal door
Orientation: Ceiling
Fire Rating: 60 minutes
Acoustic Rating: Not Rated
|
|
|
This panel is designed to fit into the structural membrane of jointless plasterboard ceiling systems. It is supplied with a beaded frame to allow for tape and jointing on site and comes complete with a fully removable flush metal door. It is inserted directly into a pre-cut hole through the face of the ceiling prior to wet finishes being applied. This is a 1 Hour Fire Rated Access Panel which has been tested to B.S.476: Part 22:1987.
|
|
|
Suitable for use in any type of wall/ceiling system within a building that requires some form of containment, e.g. computer rooms, hospital wards, swimming pools etc.
|
|
Standard Ceiling | EG FD
Product Code: EX/EG/FD
Specification
Construction: Recessed frame with To Take Fibre Tile door
Orientation: Ceiling
Fire Rating: 60 minutes
Acoustic Rating: Not Rated
|
|
|
This panel is designed to fit into the structural membrane of jointless plasterboard wall/ceiling systems. The frame incorporates a beaded frame to allow for tape and jointing on site and comes complete with a recessed door tray to accept a plasterboard infill on site. This type can also be supplied pre-boarded upon request.
|
|
Standard Ceiling | ADS SB FD
Product Code: EX/ADS/SB/FD
Specification
Construction: ADS Beaded frame with Metal door
Orientation: Ceiling
Fire Rating: 60 minutes
Acoustic Rating: Not Rated
|
|
Standard Ceiling | PF
Product Code: EX/MT/PF
Specification
Construction: Picture frame with Metal door
Orientation: Ceiling
Fire Rating: Not Rated
Acoustic Rating: Not Rated
|
|
SHEET BASE
It can be used aluminiun and zinc sheet.
It can be supplied by a polyurethane interposed panel.
Realized by several standard measures (available all measures by request).
|
|
FIBERGLASS BASE
Made of polyester resin fiberglass reinforced.
Laterals flanges for roof covering.
Height: 20 cm.
Realized by several standard measures (available all measures by request).
Gel-coat external protection (white/gray color).
|
|
|
Suspended one counter ceilings without special requirements from the building design aspect as for example fire protection. This standard revision flap makes the entrance possible to the ceiling void.
|
|
|
Alutop Rauchschutzrevisionsklappe for suspended counter ceilings with smoke-protection-technical requirements and with requirements of the fire demand of the fire grading period F90 of the counter ceiling lower surface and/or of the tween deck range in dependence for floor structure.
|
|
|
Consists of a flush metal door with a beaded frame to allow for tape and skimming on site. Made from wholly non-combustible materials in accordance with BS476 part 4.
|
|
Our products are applied only in the professional sector: industrial buildings, offices, governmental buildings etc.
Metal Wall / Ceiling Access Door
Type: Universal, Gorter®, completely assembled
Features:
- Universal for walls and ceilings
- Door flush to frame
Material:
Steel
Option: Stainless Steel
Coating:
Steel: grey primer
Dimensions (mm):
203 x 203
254 x 254
305 x 305
355 x 355
406 x 406
457 x 457
560 x 560
610 x 610
762 x 762
914 x 914
Hardware:
Hinges
Turn lock
Installation (by others):
Frame with predrilled mounting holes.
|
|
With Axiom canopy, enhance acoustics without sacrificing design. Now both form and function thrive with Armstrong's Axiom Canopy!
Axiom Canopy is a perimeter trim system designed to create "ceiling clouds" from full size tiles. Made from standard ceiling panels and ready to assemble Axiom components. Axiom Canopies will define and individualise reception areas, work stations, meeting areas within open spaces. Axiom Canopies kits take the guesswork out and add the detail of precision engineered, precut, ready to assemble profiles and accessories.
|
|
Product Attributes
Axiom Knife Edge Canopy is the new perimeter trim system designed to create 'ceiling clouds' in conjunction with full size tiles.
With the Axiom Knife Edge Canopy, you can create floating ceilings whilst improving acoustics, reduce noise levels and increase speech intelligibility over a specific area.
|
|
Application
Its aspect as an independent frame makes it possible to create new volumes and spaces, to delimit, to individualize and to emphasize specific zones.
Ref. : Embassy of Denmark, Bruxelles (Belgium) %u2022 Conference hall of 2N Telecom, Prague (Czech Republic) %u2022 Secondary school, Baelen (Belgium) %u2022 Musical Centre Il Cascinetto, Cremona (Italy) %u2022 Lamy Architect Office, Limoges (France) ...
|
|
Tectum Cloud Panels deliver design flexibility and acoustical performance in areas where a grid is not practical and superior noise control is needed. Tectum clouds are designed for a floating system with no visible suspension. Cloud panels can be easily field fabricated into custom shapes.
Radius corner clouds are available in 1½” and 2” thicknesses and the following length and width dimentions: 23¾” x 47¾”, 23¾” x up to 96” and 47¾” x 47¾”. Square corner clouds are available in 1½” and 2” up to 47¾” widths by 144” lengths. Edges can be beveled or square. Tectum Cloud Panels are available in natural, painted white or custom colors, and can easily be field painted without losing their acoustical efficiency.
|
|
DESCRIPTION
Plan version represents, with its right shaped edges, the perfect solution for wide spaces, optimizing the time of laying, obtaining a final effect of simplicity and aesthetic harmony.
FEATURES
- Right edges
- Smooth false ceiling
- Available in prepainted and powder coated version
- Wide choice of perimeter solutions
- Total accessibility to the interspace
- Easy laying
|
|
DESCRIPTION
The metal Modular panel in flat version with module 900x900, purposely studied for the realization of false ceilings for wide areas, consents a decorative continuity of environments, warranting solutions more sought.
|
|
|
|
Suspended ceilings: structures and accessories
