|
|
Hydrofloors® specialise in the concept, design and manufacture of systems that cover and divide swimming pools. The submersible boom operates vertically allowing closing off a section of the pool thus limiting a swimming area. The boom is an ideal solution for separating an indoor and outdoor pool or dividing a pool allowing different activites to take place. The boom is operated by having two racks fixed in the wall, driven by two spur gears placed on a shaft that goes through the pool shell on two ball bearings.
Hydrofloors® puts you in control.
|
|
|
|
|
|
Mobile walls "AUTOMAT"
Principle:
Mobile wall monodirectionnel with closing and opening directed by a remote control.
Installation and locking of the low telescopic cross-pieces entirely automated.
Handiness and silence of displacement:
They are ensured thanks to exclusive system ALGAFLEX, of sheathed the polymer roll of the dice carriages (Delrin), self-lubricating and everlasting.
Technical reliability:
AUTOMAT underwent the mechanical resistance and most severe shake-down tests in laboratories or center of test integrated ALGAFLEX.
Speed of the installation:
Blocking of the high and low telescopic cross-pieces by 1/3 of turn of key only.
Protection of the facings and coatings:
Reinforced by a framework in profiled aluminum. A guarantee anti-impact for the songs during the displacement of the panels. A shock-proof and anti-humidity guarantee for the low part.
Mural melamines, textiles, laminates, wood laminated, natural wood and any other coating with the request, after checking of feasibility.
|
|
|
|
|
|
Moderco Unifold partitions can help you maximize the flexibility of your facility. They’re designed to separate and control sites, sight, and sound and they’re perfect for meeting rooms, classrooms, training centers, sports centers, conference rooms, convention centers, and concert halls. They are attractive, cost-effective, and easy to operate. They’re also designed to last.
Moderco Unifold partitions feature our Airscape Ceiling Guard, which permits trapped air to escape quickly through the top of the door. The Airscape Ceiling Guard minimizes fabric stress and billowing. It facilitates easy operation and it provides a complete sound seal when the partition is fully extended.
Moderco Unifold partitions also feature rust-resistant hinges, positive stops, balanced frame supports, and wrinkle-prevention construction. They can be customized to fit your application- even curved applicationswith special accessories for your specific installation. They are available with 8” or 12” profiles and they can be manually or electrically operated.
|
|
The Mono is only available as an accordion wall. This wall takes up very little space because it is constructed from only one-sided panels.
Folding walls such as these are an ideal solution for houses or offices with a limited surface area. The Mono is very easy to operate.
|
|
The Royal has broad panels and a stylishness that can only be called timeless. Just as the Prince, the standard finish for the Royal is varnished mahogany or beechwood veneer.
For little more than the standard price, other finishes are also possible such as dark stained mahogany, natural varnished oak veneer, white varnished veneer or veneer spray painted in the RAL colour of your choice.
|
|
softwall + softblock modular system · LED lighting
The integrated LED lighting turns the white textile softwall + softblock modular system into an amazing source of light. The luminous version of softwall + softblock emphasizes the visual delicacy of the textile fibre making the expansion, contraction and fluid movement of soft all the more magical.
materials:
a flexible ribbon of LEDs
light-emitting diodes (LEDs) are an electronic light source that presents many advantages over traditional light sources including lower energy consumption and longer lifespan. molo’s LED system is available in warm white and is produced by Alder Optomechanical Corp., a German manufacturer at the leading edge of LED quality and technology
|
|
|
|
|
|
Extensible partition "ALGAWOOD"
Description:
Extensible partition with simple wall made up of panels assembled between them on all the height using hinges PVC
Suspension by roll of the dice ringed of nylon
2 SERIES
- Series 130
Width of the panels
130 mm folded up
Maximum height
-3.050 mm, Oberflex and laminate.
-2.800 mm, melamine.
Maximum width
3.300 Misters.
Weight approximately 13kg/m ²
- Series 230
Width of the panels
130 mm folded up
Maximum height
-3.050 mm, Oberflex and laminate.
-2.800 mm, melamine.
Apparent rail
Maximum width of a casement
6.000 mm (2 casements 12.000 mm).
Weight approximately 13kg/m ²
The rail:
Series 130 and 230: profiled out of tubular steel semi inside whose the rollers circulate.
The rail is bored with the workshop to facilitate the installation.
System of suspension series 130 and 230
The rail is fixed on the support which receives it and is laterally equipped with mask-rails.
Fixing of the rail
- Under beam or flagstone B.A: fixed directly using plastic drive screws and ankles.
- Under frame wood: screwed directly using wood screw.
- Under metal frame: using metal screws in pre-bored beam.
|
|
|
|
|
|
Extensible partition "ALGAFLEX SERIES 7000"
Description:
Extensible partition with rust-proof treated metal reinforcement, covered, either of fabric cotton plasticized or of furnishing fabric.
Suspension by carriage with double roll of the dice ringed Delrin.
Maximum height
5.000 mm (with the top special study)
Maximum width of a casement
6.000 mm (2 casements 12.000 mm) (beyond special study).
Thickness of the deployed partition
150 Misters.
Thickness of the folded up partition
150 mm
Obstruction
Approximately 14% + 10 cm fixed
Model with reinforced sound-proofing 20% + 10 cm fixed (attenuation of noise approximately Rw 15 to 17 dB).
With apparent rail only.
Weight 8/10 with the m ².
Model with reinforced sound-proofing 12/14 kg with the m ².
The rail:
Profiled semitubular steel 30x30, rigid thickness 15/10e, enamelled white, delivered bored for facilter the installation.
Fixing of the rail
- Under beam or flagstone B.A: fixed directly using plastic drive screws and ankles.
- Under frame wood: screwed directly using wood screw.
- Under metal frame: using metal screw in pre-bored beam.
|
|
Extensible partition "ECOPLAST"
Description:
Rigid extensible plastic partition coloured in the mass.
Suspension by slide blocks nylon circulating in a rail in white P.V.C.
The front amount is equipped with two slide blocks, which avoids the swivelling during the operation and ensures a good presentation of the hook or lock during closing.
Maximum height
2.600 mm
Maximum width of a casement
4.000 mm (2 casements 8.000 mm)
Thickness of the folded up partition
115 mm
Weight 4/5 with the m ².
The rail:
Profiled iron 20x20 semitubular, rigid, thickness 10/10e, enamelled white, delivered bored for installation apparent rail.
Fixing of the rail
- Under beam or flagstone B.A: fixed directly using plastic drive screws and ankles.
- Under frame wood: screwed directly using wood screw.
- Under metal frame: using metal screw in pre-bored beam.
|
|
Extensible partition "ALGAFLEX SERIES 2600"
Description:
Each extensible partition with rust-proof treated metal reinforcement, covered, either of fabric cotton plasticized or of furnishing fabric.
Suspension by carriage with double rollers nylons.
Maximum height
2.600 mm (with the top special study)
Maximum width of a casement
5.000 mm (2 casements 10.000).
Thickness of the deployed partition
95 Misters.
Thickness of the folded up partition
120 mm
Obstruction approximately 17%
+ 10 cm fixed
Weight 5/6 kg with the m ²
The rail:
Profiled semitubular iron 20x20, rigid thickness 15/10e, enamelled white, delivered bored to facilitate the installation.
Fixing of the rail
- Under beam or flagstone B.A: fixed directly using plastic drive screws and ankles.
- Under frame wood: screwed directly using wood screw.
- Under metal frame: using metal screw in pre-bored beam.
|
|
A tried and tested economical system for quickly and easily dividing a wide range of areas, concertina systems are particularly suited to residential locations, nursery schools and village halls.
FEATURES
- Generally top hung (with option for support at bottom if required)
- Constructed on aluminium/steel frame faced either side with heavy duty vinyl
- Vinyl available in a wide range of colours
- Aluminium suspension track
- Optional top and bottom sweep seals for improved acoustic performance
- Single wing or bi-parting configuration with optional locking
- Suitable for spaces that have intensive use, such as classrooms
- Easy installation
- One of the most cost-effective movable wall system available
|
|
Use in areas where convenient separation of space is desired, such as off hour pedestrian control, closets and storage areas. STC 30.
Materials and Finishes: Continuous length, 4 1/2” wide panels formed of vinyl clad 24 gauge steel, corrugated and reinforced with double rolled end beads for strength and resilience Single wall panel construction. Vinyl finish available on one or both sides
|
|
|
The ENTRA universal programme proposes a new dimension in organisation in the home. Its exclusive modular system enables you to make the most of the space available with adaptable measurements of height , width and depth. The refined finish of its woods and accessories – draws, double draws, removable shelves, clothes rails, tie racks, trouser racks…-- it gives a unique touch of design, harmony and elegance.
|
|
|
|
|
|
The curtain:
It consists of two walls extending in parallel over the entire length from the opening, out of synthetic fabric containing wire polyester coated on two vinyl polychloride faces, plasticized and fireproofed in the mass and manufactured in bands of 1,80 m width.
Walls:
They are spaced of 450 mm and consist of horizontal bands in quantity and length sufficient to cover the opening completely.
Each wall is attached to different to the point of binding by standing ropes 3 mms in diameter, every 750 mm, to allow a lifting equal folds.
Surfaces external of the walls are smooth and without fasteners.
Bands:
Each band is connected by thermosoldering and seams made to the machine.
Handling:
The mechanism of lifting, with electric drive, consists of a motor reducer with an axis connected by a chain to a driving drum, on which come to be rolled up the cables which are used for raising or descending the bar from lifting, supporting the curtain.
Implementation:
The operation of lifting or descent of the GYMNAFLEX is carried out by a person, by the intermédiare of an electric box, made up of a key switch with constant pressure.
|
|
STACKABLE MOBILE PARTITION WALLS
ANAUNIA's stackable mobile partition walls are suitable for any type of building layout, for the division of space inside gyms, sports centres, exhibition stands, commercial and industrial warehouses and so on.
They carry a quality guarantee, thanks to technical installation staff with over ten years' experience, and to the CE certification of compliance with the Machinery Directive.
ANAUNIA's stackable mobile partition walls can be used in an infinite variety of differently designed spaces and in situations where multi-functional space is a social and economic requirement. ANAUNIA's own leatherette material is a guarantee of quality, having obtained class 1 fire-resistance certification.
|
|
- Good Sound Control and Safely
Curtain with double siding ± 460mm (18 inches) apart.
- Ease of operation
Cables and pulleys lifting system activated by a constant pressure single key switch (second key is optional)
- Impact resistant
Both sides of curtain are made of 43 oz vinyl
1) A 100% 5 year warranty on all components.
2) Machined grooved drums with wide flange to avoid cable derailment.
3) Double chain system equipped with safety switches in case of chain breakage.
4) Optional hydraulic emergency stopping device in case of gearbox malfunction.
|
|
|
|
|
|
CHARACTERISTICS
Movable wall system 85 of total thickness 90 mm, with perfilería seen, and sound insulation included between 37 and 42 dB Rw, made up of a autoportante aluminum structure extrusionado in alloy 6063 according to norm UNITES 38-066-89, and treatment of hardness T-5 type, suspended in a unique car of bearing in guide superior allowing an express and precise movement of the modules, of smooth and quiet form and with total absence of guide inferior, with system of fast anchorage by means of unique drive of quarter of return.
The structure system allows to apanelar the outer surface of the modules with any finished type of, according to precise needs, as they can be natural wood plate panels varnished, stratified HPL, melamines, PVC, etc.
This system is made up of independent modules, with opaque possibilities of arranging, modules, doors, glazed, etc, suspended of sliding guide, and equipped with system of by telescope inferior and superior for the anchorage of the same in its compartmentation position, guaranteeing therefore the perfect seal in all the perimeter of the compartmentation, as well as a high stability of the system.
|
|
|
ANAUNIA Residential line of Movable Partition Walls offers the ideal way of separating one room both physically and acoustically into two or more independent domestic areas: kitchen-sitting room, living room-study, living-sleeping areas. They are composed of independent panels which slide along an aluminium guide rail fixed to the ceiling without the need for a track or guide rail along the floor.
|
|
|
The pure wall: A product for long-term use constructed of repairable, recyclable materials. The Transport Container System provides fast assembly and storage, without packing waste. mila-wall's® honeycomb interior makes the individual wall modules light-weight so that two people can manage individual wall modules easily. The aluminum frame (mila-wall® series 100) protects the module edge and provides additional strength. Surfaces can be removed and replaced with new coverings. This guarantees a long-term use of the walls. In order to allow hanging of heavy exhibits, the wall modules are available with an inner solid wooden core (nailable modules).
|
|
|
|
|
|
BUILT TO LAST
Durability is the basis of our Signature and design. All our Panels are built with a strong steel reinforced aluminum alloy frame that provides strength and stability as well as protection to the panel finish while panels are in motion. The unique combination of our frame and various available substrates ensures a panel that will last for years in your application. All Moderco panels carry a 2 year parts and labor limited warranty with our suspension systems carrying a 5 year limited warranty.
LIMITLESS FINISH POSSIBILITIES
Traditional finishes of vinyl, fabric, and carpet are available in a variety of colors and textures. Signature offers far more including: Plastic Laminates, Wood veneers, & Specialty steels (to name a few). Our Installing Distributors will work with you on applied millwork moldings, inset trims and other custom design finishes.
THE PANEL
All Signature panels start with a heavy duty extruded aluminum frame. The frame, extruded to very close tolerances, is designed to be extremely rigid, resisting racking and twisting. The aluminum frame is then reinforced with heavy duty tubular steel as required by height and weight. The design of the frame allows for skins of various materials which can be replaced or changed in the field. The core of the panel is filled with insulation to achieve the desired Sound Transmission Class (STC). The result of this special design is a flat, rigid panel, which will provide years of quality performance.
|
|
|
Mobile partition solid right angle on 3 wheels, for multipurpose halls, museums, exhibitions... to separate quickly your spaces .
|
|
|
TecnoMove movable walls are designed in such a way that the need for floor guidance has been eliminated. With manually operated spindle mechanisms and pressure sleeves the separate panels are secured firmly between floor and ceiling. This combination ensures a stable and sound sealing wall. With regards to the layout of the wall, the choice of one or two point suspension offers many possibilities of parking positions, leading to a variety of solutions.
|
|
Created by Moderco, the electrically operated Gymdoor is the best way to divide gymnasiums and auditoriums where manual operation is not practica
Features:
- All welded steel panels, 3 inch thick, with a STC of 43 and 49
- Heights up to 45' /13 700 mm
- Highly impact resistant
- Extra safety devices are available upon request
- Ten year warranty
Durability:
A three inch panel bonded and welded for maximum shock resistance and longer durability.
The track and trolley system is so durable and resistant that Moderco offers a ten year warranty.
|
|
|
Estfeller partitions separate rooms quickly and with elegance. They are suitable for every architectural demand and be adjusted for special needs.
|
|
| ... products without information |
| |
|
|