Surface preparation...

61 companies | 303 products
Filters
  • What’s new?
    Submit

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors.
TECHNICAL DATA:
Colour: white, beige, light grey, red, anthracite...

Fibre-reinforced elastomeric, thick-layered finishing product with high filling properties, for internal and external surfaces.
TECHNICAL DATA:
Consistency: thick liquid.
Colour: white or various...

Polymer modified render for internal/external wall insulation systems.
Mapetherm AR1 is used for bonding and smoothing floors and ceilings in interiors and exteriors insulation boards (made of extruded/expanded polystyrene, rock wool, cork, etc.) directly...

{{productDetail[3921]}}

Spatula mass for opaque coatings, exterior and interior. For the closing of small surface defect...

Detergent in the use of water-soluble products for dirty...

A fast drying filler/stopper for small nail holes and cracks.

Application...

An alkyd based surface filler for open woodgrain that enables a particularly smooth finish to be achieved...

{{productDetail[3311]}}

Breathable finishing smoother for internal Diathonite plasters.

Finishing micro-porous smoother for plasters,...

{{productDetail[54701]}}

For providing a skim type finish...

{{productDetail[56810]}}
{{productDetail[62387]}}

FINE LEVELLING AGENT FOR EXTERIORS AND INTERIORS
code 9580019
LEVELANT is a fine white mineral binder-based levelling agent recommended for smoothing plasters...

ALL-PURPOSE PAINT REMOVER
code 5610014
SVERNICIATORE SM10 is a product in gel form specifically formulated for the removal...

{{productDetail[54675]}}

Leveling filler RASANTE Atriafloor walls and floors Atriafloor cycles.

Atriafloor RASANTE leveling filler is a aqueous emulsion resin-based and inert aggregates made ​of...

Leveling filler RASANTE Atriafloor walls and floors Atriafloor cycles.

Atriafloor RASANTE leveling filler is a aqueous emulsion resin-based and inert aggregates made ​of...

Leveling filler RASANTE Atriafloor walls and floors Atriafloor cycles.

Atriafloor RASANTE leveling filler is a aqueous emulsion resin-based and inert aggregates made ​of...

Leveling filler RASANTE Atriafloor walls and floors Atriafloor cycles.

Atriafloor RASANTE leveling filler is a aqueous emulsion resin-based and inert aggregates made ​of...

Leveling filler RASANTE Atriafloor walls and floors Atriafloor cycles.

Atriafloor RASANTE leveling filler is a aqueous emulsion resin-based and inert aggregates made ​of...

{{productDetail[55360]}}

CP1* is a white, organic, cement-based, waterproof, elastic, highly breathable, two-component mineral levelling compound.
*Plastivo copolymer-based

WHERE TO USE IT
To protect and waterproof walls in general.
Particularly...

CP2* is a grey, organic, cement-based, waterproof, elastic, breathable, two-component mineral levelling compound.
* PLASTIVO copolymer-based

WHERE TO USE IT
CP2 effectively protects reinforced concrete structures from absorbing aggressive agents, thereby delaying corrosion...

X-RAPID is a semi-rapid, hydrophobic, single-component, cement-based levelling compound with controlled shrinkage, used for surface finish, applicable in a thickness range of 1 to 4 mm.

WHERE...

{{productDetail[55239]}}

Epoxy grout (two-component) used for repairing concrete, and filling cracks and holes. KTISODUR G has a lightweight texture enabling it to be applied on...

{{productDetail[143898]}}

TECHNICAL CHARACTERISTICS: ISI-FISS (gr, bn) is a special bonding agent and top coat plaster in white or grey color featuring high performance, adhesion and elasticity. The high adhesion performance makes the product suitable for installation on all types of panels. ISI- FISS (gr, bn) is compliant to ETAG 004 European guidelines.



FIELD...

TECHNICAL CHARACTERISTICS: T-SPAN is a bonding/leveling agent constituted by natural hydraulic lime, selected aggregates featuring a maximum granulometry of 0.8 mm, and additives. Used as a leveling agent, it allows ease of application and excellent characteristics of adhesion and elasticity.

FIELD OF APPLICATION: T-SPAN has been...

IDROTASS is a dual component product in special hydraulic binders and selected aggregates with maximum granulometry of 0.6 mm combined with special additives in water dispersion, suitable to create leveling that is waterproof, carbon dioxide and vapor proof, and that has high deformability and priming capacity.

FIELD OF APPLICATION: IDROTASS is used as a protective and waterproofing leveling...

TECHNICAL CHARACTERISTICS: T192D is a thermal insulated mortar characterized by a thermal conductivity comparable to the one of porous bricks used in construction. T192D is compliant to UNI EN 998-1 and it is subject to CE marking in accordance to regulations in force. T192D is compliant to Italian Ministerial Decree 10/05/2004 and it is available in CSII resistance...

TECHNICAL CHARACTERISTICS: T-FLASH is a mortar with high plasticity and quick drying (approx. 20 minutes), specifically designed to repair electrical marking, hydraulic marking and holes; its quick drying makes T-FLASH immediately suitable for finishing.

FIELD OF APPLICATION: T-FLASH is ideal for filling and repairing line marking...

{{productDetail[126363]}}

GENERAL CHARACTERISTICS
Due to its special chemical formulation VITEX KITCHEN & BATH CLEANER is ideal for cleaning stains and mould. It...

{{productDetail[125197]}}

FLEXIBLE FILLER Formulated on the basis of resin and fibreglass this filler is particularly elastic and easily absorbs any flexing in the substrate. FIRBELASTIC is easy to use and dispenses with the need for repair tapes.

Benefits
Never wet the substrate before applying FIBRELASTIC.
Installation Instructions
AFNOR classification NFT 36.005. Family IV Class 4b.
TECHNICAL...

GENERAL-PURPOSE ADHESIVE FILLER CE 3000 allows a multitude of indoor jobs: bonding of plaster boards, attachment of polystyrene elements, filling, smoothing, decorative rendering.

Benefits
A single all-round product....

FAST SETTING JOINT FILLER Formulated specially for short setting times, CE 78 RAPIDE makes for faster work on site.

TECHNICAL DEFINITION
CE 78 RAPIDE is a powder filler designed
specifically for jointing tapered edge
plasterboard in combination with a joint
tape.
4 hours mix...

{{productDetail[71724]}}

Rapid cementitious anti-shrinkage levelling grout.

SPECIFICATION
ADEPLAN LR 95 is an ultra-fast setting thixotropic cement-based levelling grout. To be used for thickness from 1 mm to 20 mm. ADEPLAN LR 95 is a powder made...

Universal waterproofing levelling grout, with super adhesion.

SPECIFICATION
Powder waterproofing levelling grout based on cement, silica sands, synthetic binders and special additives to be mixed with water only....

Self-levelling product with ultrarapid setting for thickness from 3 to 30.


SPECIFICATION
Grey powder product based on rapid setting cements, selected graded sands, synthetic resins and additives...

{{productDetail[60121]}}

BEHR PREMIUM DECKOVER™ Cleaner is ideal for cleaning and brightening areas coated with the DECKOVER...

Whether youre preparing your deck for a stain or finish, or just doing regular maintenance,...

A great finish begins with the right start. BEHR PREMIUM Wood Stain...

{{productDetail[88315]}}
{{productDetail[11210]}}

For prepainting primed/filled wood...

A weather-resistant brush-on filler undercoat with a silicate base...

{{productDetail[64782]}}
{{productDetail[59329]}}

Description
Dega Plast Stucco: Non-toxic, resiniferous monocomponent stucco, obtained mixing polymers with quartzes...

Solvent-free (non-toxic), bicomponent resinfiller in paste form, based on modified copolymer synthetic resins, charged with hydraulic binders.DEGA® ROCK 25 :Solvent-free (non-toxic), bicomponent resin filler in paste form, based on modified copolymer synthetic resins, charged with hydraulic binders,...

Description
STUCCO MONOSINT: Non-toxic, monocomponent resiniferous stucco obtained mixing polymers with quartzes and natural...

Non-toxic and biodegradable cleaning agents. AP 10 quickly acts emulsifying and dispersing dirt and grease. AP 20 is more aggressive than AP10, on acid base to eliminate...

{{productDetail[55687]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation