Coatings for other applications

A new product formulated with natural clay, which confirms Novacolor’s green approach and sustainable innovation. An historical raw material such as clay, combined with modern technologies, finds the maximum expression within Archi+ ...

Wall2Floor Top Coat Waterproof is a two-component epoxy coating in paste form, for interior use, trowelable, for horizontal and vertical applications, particularly suitable for humid environments or those repeatedly in contact with water. ...

The image that this pattern embodies has ancient origins: Inari, god of laughter and of human interpenetration with nature, is the portrait of a desire, of a precise marking that imprints itself like a groove. The resulting geometry is ...

Decorative primer/finish coating for continuous floors and walls - for the single-component allover system ALLOVER BASE is a spreadable paste product specifically designed to create both an anchoring primer and textured, textured finishes ...

ALLOVER FINISH is a spreadable paste product that can only be used over horizontal and vertical coatings made with ALLOVER spreadable products. Use ALLOVER FINISH when a smoother, more minimalist and less textured aesthetic finish is ...

MARCONOL IMPREGNANTE is a product used to impregnate woodwork. It features a high throwing power required for outdoor resistance and to protect the wood against pollutants, even in harsh environmental conditions, remaining unaltered despite ...

Ready to use, superlight thermally-insulating base screed Selected water binder prebatched for 110 Kg/m³ - perfectly spherical virgin expanded polystyrene beads with high thermal insulation power (2 mm Ø), mixed with special E.I.A. ...

One component satinized coating for painting concrete pools and tanks One component satinized coating with an high resistance from UV rays, suitable for the protection and coating of swimming pools. Pool Protector presents high performance, ...

Two component, polyurethane and transparent water-based coating for the protection of multipurpose coatings realized in acrilyc or epoxy resin. Increase the abrasion resistance and allows to leave raw the original texture of the product ...

Thermal spray cork-based plaster for inside and outside, suitable for thermal insulation and dehumidification. Composed by natural raw materials, the product is suitable for historic refurbishment and green building. Cork-based natural ...

Capacity in Kg: 5 kg

A continuous surface with a metropolitan feel, with a texture inspired by the look of industrial floors in spatula cement effect, for contemporary residential and commercial architecture and trending interior designs. In particular, ...

Capacity in Kg: 3 kg

A decorative system with pearlescent effect for the elegant and sophisticated interpretation of surfaces to create iridescent, delicate, and precision floors and coverings. SpazioLamina#Perlato is another example of how stylistic research ...

Capacity in Kg: 2 kg

Surfaces decorated with chiaroscuro aspects modulated to suit the client’s requests and artisan skill of the installer, for truly unique and personal effects. This surface is inspired by the effects obtainable using the various trowelling ...

Capacity in Kg: 30 kg

isolera bitumen thick coating 2C is used for the production of exterior waterproofing of buildings in areas in contact with the ground. The product is suitable for use on horizontal/horizontal and on vertical/vertical surfaces. In addition, ...

A specially developed innovative highly durable polyurethane coating that glows intensively when it gets dark. Useful for highly crowded places, such as conference rooms, corridors, staircases. When the lights go out, the room is lit ...

Rouviere Collection microconcrete is applied as a trowelled coating with “béton ciré” effect. It is a perfect wall coating as well in dry environments as in showers, bathrooms, etc. Available in more than 60 colours, it can be adapted ...

Lime is used for centuries in construction. The highest quality of lime is its high permeability to water vapor, which can greatly reduce humidity and condensation problems in old buildings so mainly renovations. Lime-based coatings are ...

San Deco Microcement System San Deco Microcement combines multiple surfaces with its multifunctional feature and presents a unique, modern, and elegant look. It can be applied on cement, concrete, marble, furniture, and even smooth ...

DENTEX DECO is a textured décorative coating material applied as a pattern layer under the DENTEX product on acrylic émulsion based exteriors. SCOPE OF APPLICATION In all kinds of buildings; Plaster is used on exposed concrete, ...

Water based rubber modified bitumen coating. No solvent, safe for use in confined areas, no dangerous vapours (no hydrocarbon solvent). Pasty compound to be applied over rough surfaces. No flowing when used vertically (tyxotropic). Usable ...

Capacity in Kg: 30 kg

The Coloured Concrete EBC by Mercadier is decorative finishing mortar with a very fine grain, coloured in its mass. Due to its exceptional grip on the majority of surfaces and waterproofing qualities, this material adapts to all the ...

Capacity in Kg: 30, 14, 24 kg

A concrete coating enriched in lime Our PURE® Mineral Beton is a concrete coating enriched in lime. It allows the realization of interior decorations in polished concrete, vertically as well as horizontally (walls, wash-basins, technical ...

If you are looking for a touch of industrial décor to add to your interior, opt for PURE® Métal – an innovative cold metallisation process! A decorative coating PURE® Métal is a decorative coating that you receive when combining powder, ...

Capacity in Kg: 23 kg

This high-strength, veneer plaster produces a hard, abrasion-resistant surface for commercial and residential applications where walls are exposed to significant traffic. Imperial® Veneer Basecoat is designed for two-coat applications ...

A high build coating designed to protect, resurface and repel water on old damaged wood and concrete. Helps bridge dimensionally unstable cracks on old damaged sound wood surfaces. Helps to smooth rough wood and concrete surfaces. Easy ...

Optimum indoor coated steel especially for interior building systems. Excellent formability with a deep matt finish Matt finish eliminates unpleasant reflection on ceilings and partitions Lightweight solution for ceilings 25µm ...

DESCRIPTION A one-component, water-borne, functional, anti-condensation coating for airless application. PRODUCT FEATURES Suitable for interiorpainting of mineral walls and ceilings, such as concrete, plaster, bricks etc. RECOMMENDED ...

Description A nonaggregated texture, ProForm® BRAND Perfect Spray® EM is used to create a wide range of wall surfaces. Basic Uses By adjusting mixture consistency and/or varying the atomizing pressure, ProForm Perfect Spray EM creates ...

Durable and non-yellowing Easy application Soap-and-water cleanup Can be used as a clear coating over decorative faux finishes Flat (425) is not recommended for floors

is a bicomponent resin filler that can be used to prepare surfaces to be coated with resin, such as old crumbl cement, plaster or porcelain stoneware floors. It gives the finish floor a natural rocky stone look; its special resistance ...

Fot giving standard Fermaceli boards a skim type finish