- Flooring & Wallcovering >
- Paint, Decorative plaster >
- Floor coatings
Floor coatings
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
One-component coarse-textured cementitious paste for creating decorative floor and wall coatings with a trowel or nuvolato-effect finish. ULTRATOP LOFT is made up of ULTRATOP LOFT F and ULTRATOP LOFT W and is a cementitious-based system ...
Capacity in Kg: 22 kg
Inadequate protection around service penetrations can put buildings at risk of fire spread. The ROCKWOOL Firestop Compound offers a reliable solution to effectively re-instate compartmentation within fire rated walls and floors, offering ...
Decorative primer/finish coating for continuous floors and walls - for the single-component allover system ALLOVER BASE is a spreadable paste product specifically designed to create both an anchoring primer and textured, textured finishes ...
ALLOVER FINISH is a spreadable paste product that can only be used over horizontal and vertical coatings made with ALLOVER spreadable products. Use ALLOVER FINISH when a smoother, more minimalist and less textured aesthetic finish is ...
EPOXY COMBO is a two-component epoxy binder to be used as a modifier of the CONTINUO BASE skim coat. The resulting three-component epoxy mortar guarantees excellent mechanical resistance and high adhesion to the surface.
Wall2Floor Top Coat Waterproof is a two-component epoxy coating in paste form, for interior use, trowelable, for horizontal and vertical applications, particularly suitable for humid environments or those repeatedly in contact with water. ...
NOVACOLOR
is a mineral plaster coat for the decoration of horizontal and vertical surfaces in prestigious places. Decoration of highly valuable interiors in compliance with current trends in fashion and architecture.
NOVACOLOR
is a mineral coating for the decoration of interior and exterior horizontal and vertical surfaces. Top quality indoor decoration, in line with the most modern and current trends in "concrete" in the field of architecture.
NOVACOLOR
Waterproofing and ultra-reflective coating, resistant to water stagnation and flexible to cold. It guarantees UV rays reflection, lowering the temperature of the support over which it will be applied. It can be applied on slated or bituminous ...
DIASEN
Mono component multipurpose synthetic coating suitable for vehicles. Monocomponent multi purpose driveaway coating, suitable for indoor and outdoor application. It can be used as a protective coating in combination with liquid waterproofing ...
DIASEN
Two component, polyurethane and transparent water-based coating for the protection of multipurpose coatings realized in acrilyc or epoxy resin. Increase the abrasion resistance and allows to leave raw the original texture of the product ...
DIASEN
Capacity in Kg: 5 kg
A smooth surface characterised by light shading and delicate chiaroscuro effects, ideal for contemporary but also classic and elegant settings, and also in combination with more pronounced styles such as vintage or country. The shading ...
LITOKOL
Capacity in Kg: 5 kg
A continuous surface with a metropolitan feel, with a texture inspired by the look of industrial floors in spatula cement effect, for contemporary residential and commercial architecture and trending interior designs. In particular, ...
LITOKOL
Capacity in Kg: 5 kg
Decorative systems that evoke the passing of time and transformation of weathered metals. Urban and post-industrial landscapes are revived in these oxidised surfaces featuring an absolutely unique look. Ideal for ultra-contemporary ...
LITOKOL
Elval Colour's arypon® is a permanent treatment of coated aluminum products that can be used to provide “Easy to Clean” surfaces, based on nanotechnology. These fluoropolymers react with the surfaces, creating a low surface energy coating ...
Rouviere Collection microconcrete is applied as a trowelled coating with “béton ciré” effect. It is a perfect wall coating as well in dry environments as in showers, bathrooms, etc. Available in more than 60 colours, it can be adapted ...
Rouvière makes a microcement based decorative plaster for all kinds of use : shower walls, bathroom, floors, swimmingpool interior, etc. It can be applied on almost all material without a primary coat (on tiles for example). Available ...
Micro concrete plaster with cement polished effect for floors and walls. Indoor usage : bathrooms (also available in Hammam, sauna, etc.), kitchens, floors, stairs, etc. Outdoor usage : terraces, outdoor stairs It is available in ...
One-component cement-based elastic waterproof coating Use AQUAZIP ONE is used for waterproofing concrete substrates and the like, including those subject to deformations under load, ceramic tiles, natural stone floors, as waterproof ...
Fassa Bortolo
Eco‑friendly, organic preparation coat for treatment and cleaning of non‑absorbent substrates, ideal for GreenBuilding. Thanks to its formula, Keragrip Eco Pulep removes dirt from surfaces and prepares them for subsequent laying operations, ...
KERAKOLL
WATERBORNE EPOXY 3 COMPONENT COATING (A+B+C). Waterborne 3 component product based on liquid epoxy resin with hydrolytic binders, to be used as primer for substrates even with humidity from ground-up. Uses Reduces the roughness ...
SIVIT
TRANSPARENT WATERBORNE POLYURETHANE COATING (A+B). Two component product based on a poly urethane dispersion with a hydrophilic aliphatic poly-isocianate. The film characteristics: – Excellent adhesion on several materials – Excellent ...
SIVIT
TRANSPARENT SOLVENTBORNE ALIPHATIC POLYURETHANE COATING Resistant to UV rays, acid rain and the action of numerous acids: these are the characteristics of Finisol Trasparente Lucido which, combined with flexibility, make it suitable ...
SIVIT
San Deco Microcement System San Deco Microcement combines multiple surfaces with its multifunctional feature and presents a unique, modern, and elegant look. It can be applied on cement, concrete, marble, furniture, and even smooth ...
STONE EFFECT Classic Effect is a thin-layer flooring decorative finish imitating the structure of a concrete floor. It gives various decorative effects depending on the application method. Fits perfectly in raw industrial style spaces. ...
A premium drivable floor coating offering a unique multi-speckled finish for horizontal concrete & masonry surfaces. It fills in hairline cracks and resists hot tire pick-up, dirt, grease and household stains. Use this coating to transform ...
Weber Industries
AQUADERE® STICK is a ready-to-use cold-applied bitumen emulsion primer (solvent free). AQUADERE® STICK is specially used for self-adhesive waterproofing membranes. Advantages: - solvent free (COV), - tools can be clean with ...
SOPREMA
Capacity in Kg: 30 kg
The Coloured Concrete EBC by Mercadier is decorative finishing mortar with a very fine grain, coloured in its mass. Due to its exceptional grip on the majority of surfaces and waterproofing qualities, this material adapts to all the ...
Mercadier
LD925 is a sprayable, water-based elastic liquid membrane which forms an air seal after drying, with a moisture-variable diffusion resistance. Usage/Purpose Specifically designed for building applications where a high level of air ...
Concentrated soap with wax for finishing and maintenance of wooden floors with a soap finish. Dinesen Floor Soap Natural provides a warm and natural expression. When Dinesen Floor Soap Natural is used regularly, a soap membrane is ...
Dinesen
H&C® ClariShield® Water-Based Wet Look Clear Concrete Sealer provides a high-sheen finish that enhances the look of concrete. This low odor, water-based formula is great for interior & exterior applications and offers easy cleanup with ...
Sherwin-Williams
A two-component, solvent-free, self-leveling epoxy coating. This excellent high-glossy paint is for treating of new and old concrete floors in industrial facilities, also in commercial and public premises. Durable epoxy coating Temafloor ...
ECOguard is a revolutionary coating designed to preserve the beauty of ECOsurfaces that is now standard on all ECOsurfaces wear layers (excluding tile products and ECOnights). It is a factory-applied maintenance coat that protects the ...
A unique integral crystalline chemical treatment to waterproof and protect concrete, PENETRON PLUS is specially formulated for dry-shake applications on horizontal concrete surfaces or precast segments where greater impact and abrasion ...
Durable and non-yellowing Easy application Soap-and-water cleanup Can be used as a clear coating over decorative faux finishes Flat (425) is not recommended for floors
is a bicomponent resin filler that can be used to prepare surfaces to be coated with resin, such as old crumbl cement, plaster or porcelain stoneware floors. It gives the finish floor a natural rocky stone look; its special resistance ...
GOBBETTO
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how ArchiExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining