|
|
The ramps are generally made of a wooden frame, and finished with a black anti-slip rubber.
The junction between the ramp and the access floor is a metallic profile. The ramp nosing is made of an aluminium profile.
The recommended slope of a ramp is 5%, with a maximum of 10%.
Handling of loads on the ramps must be made with appropriate means, under the responsability of the user. |
|
ADA Ramps
Our wheel chair ramps provide ADA compliant access to portable classrooms, site built, and modular buildings.
Experience smooth, continuous handrails and a slip resistant walking surface on our aluminum ramps for safe and easy access.
Each wheel chair ramp is made of non-corrosive and non-combustible materials for safe access.
Handicap ramps are maintenance free and are fabricated from durable aluminum for exceptional value over a long life cycle.
REDD Team offers handicapped ramps of adjustable heights and slopes for versatility in permanent or re-locatable installations.
No field welding required on ADA ramps for fast and easy installation.
Modular design is re-locatable and reconfigurable for the best value in a handicapped ramp system.
Minimal assembly resulting in fast installation.
Five-year warranty.
Meet ADA guidelines!
Aluminum Wheel Chair Ramps Help You Meet ADA Guidelines
The Universal Ramp System provides ADA access to portable and modular buildings. Its modular aluminum components make it easy for you to relocate and reconfigure the aluminum wheel chair ramp according to your need. The Universal Ramp System is reusable due to its ease of mobility and long life cycle. The Universal Ramp System, along with its counterpart the Universal Stair, can provide you with safe and low maintenance accessibility solutions.
|
|
walls system, hinged doors and sliding doors with hidden support sections
A system which as part of its developmet was planned to achieve as much simplicity as possible. This technology was refined to remove every kind of visual technical complication and all connecting elements "disappear" from view producing walls which merge invisibly into the floor and suspended ceiling.This architectural vision deliberately planned by removing unnecessary detail aims to reclaim the pure essence of architecture. |
|
The Gammabox M0 panel has been specially designed to meet the requirements of technical, data processing and scientific applications, when a high protection is necessary in case of fire.
The Gammabox M0 panel is classed M0 ( incombustible ).
It is suitable for all the coverings used with access flooring, excepted textile and mineral coverings.
Composition :
The Gammabox M0 panel is made up as follows :
A mineral core, thickness 30 mm.
A bottom tray of 0.5 mm thick galvanized steel turning up the sides of the panel.
A perimeter plastic edge trim.
Coverings :
The Gammabox M0 panel is available with the following coverings :
High pressure laminate.
Vinyl.
Linoleum.
Rubber.
Dimensions :
Standard size : 600 mm
Fire Classification :
The Gammabox M0 panel is classed M0 ( SME/SNPE report n° 12189-05).
Electrical resistance :
It varies from 5x108 to 2x1012 ohms, depending on the properties of the covering.
Acoustic :
The acoustic insulation measured between 2 adjacent rooms, separated by a densely insulated partition, varies from 46 to 51 dBA, depending on the thickness of the panel and the covering ( Dn,f,w according to Standard EN ISO 140-12). |
|
The TK SOFT solution is the only patented system with certified performance which drastically reduces the impact noise transmitted from one floor to another.
Our solution means that noise levels considerably lower than those required by law can be achieved thus combining the advantages of a raised floor system with those of noise insulation: another Teknofloor® breakthrough.
In Italy legislation on permissible noise levels states that in this field the framework law no.447 dated 26 October 1995 applies. This law establishes the sphere of jurisdiction of the State, Regional authorities, Provincial authorities and Municipalities, introducing plans for acoustic remediation and supplying dispositions on the matter of acoustic impact.Law no. 447 "Passive acoustic requisites for buildings" Ministerial Decree 5/12/1997 indicates the maximum limits for the level of impact noise transmitted (L'nw):
Type of building
L'nwResidential, Hotels 63 dB
Hospitals, nursing homes, schools 58 dB
Offices, places of worship, commercial premises 55 dB
The law lays down that the impact noise perceived one floor away must not exceed a certain level. It is therefore clear how important the observance of such requisite is, both to avoid economic damage and to guarantee maximum comfort to the future occupants.For example, in the case of offices, with a floor 20 + 4 cm high in a clay /cement mix (300 kg/m2) a foreseen noise level of 77 dB is established: our system permits a reduction of 33-35 dB, to achieve a transmitted value of approximately 42-44 dB: absolutely superior performance compared to traditional systems. |
|
The Gim-Pf panel allows air supply at any location of the access floor.
These panels are entirely made of steel and compatible with all other Gamma panels.
Loading performances :
The load classes of the Gim-Pf panels are identical to the classes of the panels they mixed with.
Air flow Characteristics :
The total free area per panel is 8 dm².
Optional adjustable sliding dampers can be fitted for adjustment of the air flow.
The graph below shows the possible air flow according to the air pressure in the plenum and the air pressure drop according to the air flow. |
|
MPO SUBSTRUCTURE
Substructure for raised floor with high load requirements.
Made by stringers with closed section, H shaped, with size 60 cm and 180 cm.
Besides the high mechanical resistance, it guarantees maximum stability for height over
|
|
Pedestal Base: Galvanized 3 mm steel plate 100 x 100 mm square base welded to 25 mm diameter pipe.
Pipe: 25 mm diameter pipe by the thickness 1.5 mm welded to 3 mm pedestal square base.
Pedestal Head: Galvanized 3 mm thick steel plate with a suitable shape for easy assembly of stringers. The head is welded to M18 galvanized steel rod. |
|
Bridging profiles are used when a raised floor must be installed over ducts, channels, conduits, or holes of large sizes.
These bridging profiles enable to suppress one or several pedestals. |
|
| The Freeway access floor is elevated flooring formed by 600 x 600-mm steel panels with cold-drawn corners and cement cores installed by positive positioning onto height-adjustable, metal pedestals fixed to the sub-floor. Recommended for use in buildings in which easy plenum access is required. |
|
| The Stringered access floor is elevated flooring formed by 600 x 600-mm steel panels with cement cores installed onto a grid of stringers screwed onto height-adjustable, metal pedestals fixed to the sub-floor. Can be installed to heights of up to 900 mm. |
|
| The Unifix access floor is elevated flooring formed by 600 x 600-mm steel panels with cold-drawn corners and cement cores installed by positive positioning and screwed onto height-adjustable, metal pedestals fixed to the sub-floor. It adapts to the needs of each building, facilitates installation maintenance and ensures user comfort. |
|
Composition of the structure: same as the CTA structure
Base: same as the CTA structure
Head: same as the CTA structure
Stringers: horizontal, 10/10 thick, suitably moulded using a folding press so as to form a “U” with sides of 30x25x30 mm, fitted with anti-static, airtight and dust-proof gaskets guaranteeing the stability of the whole
Adjustment system: same as the CTA structure |
|
Structure composed of Base resting on the slab floor and Head which the panel rests on.
Base: round, 93 mm in diameter and 1.5 mm thick, specially reinforced with strengthening ribs to give it structural rigidity and predisposed with holes for attachment to the slab floor.
The base is moulded for attachment to a shaft measuring 20x2 mm of variable height, pressure-fixed to the base by means of press-fitting of the shaft itself.
Head: square-shaped 80x80 mm and 2.5 mm thick, this is cold-formed and predisposed with a socket to receive the gasket for the head.
Stringers: absent
Adjustment system: At the centre of the head the screw + nut group allows variation of the height of the entire structure using the micrometric, anti-back-off mechanism so as to achieve the final height. |
|
Composition of the structure: same as the CTA structure
Base: same as the CTA structure
Head: same as the CTA structure
Stringers: horizontal, 10/10 thick, suitably moulded using a folding press so as to form a "U" with sides of 18x25x18 mm, fitted with anti-static, airtight and dust-proof gaskets guaranteeing the stability of the whole.
Adjustment system: same as the CTA structure |
|
Alucast is an aluminium die-cast panel of great strength.
Alucast is suitable for industrial and high-tech clean rooms installations, and for rooms with non-magnetic requirements.
The panel is suitable for all the soft coverings normally used for access flooring.
Composition :
The Alucast panel is made up as follows :
A top distributor plate, 3 mm thick.
A double peripheral reinforced rib.
A network of central ribs.
The monolithic conception of Alucast panels enables to reach the levels of performance and accuracy required for high-tech applications.
Coverings :
The Alucast panel, plain or perforated, is available with the following finishes :
Vinyl
Rubber.
The Alucast grating (AF6) is available rough or epoxy painted.
Alucast PF 2 : Perforated panel 11 % free area. Dimensions :
Standard size: 600 mm.
Alucast PF 4 : Perforated panel 22% free area.
Fire classification :
Without covering, the Alucast planel is classed M0 ( incombustible), by nature.
Electrical Resistance :
It varies from 5x105 to 2x1012 ohms, depending on the properties of the covering.
Alucast AF 6 : Grating 60% free area.
Range of perforations :
Alucast PF 1 : Perforated panel 7% free area.
Alucast PF 2 : Perforated panel 11% free area.
Alucast PF 3 : Perforated panel 15% free area.
Alucast PF 4 : Perforated panel 22% free area.
Alucast AF 5 : Perforated panel 40% free area.
Alucast AF 6 : Grating 60% free area. |
|
NORTEC is a floor system for the highest demands of fire and noise protection, also available in our DESIGNline for top aesthetic appeal.
Production at Lindner even means we can check the raw materials used. So we can select from a large range of formulas the right one for each building project.
Its excellent properties and high walking comfort make NORTEC the standard system for office areas.
Our NORTEC panels have been classed by the Institut für Baubiologie (Institute for Building Biology) in Rosenheim, Germany, as hazard-free. They are made from regenerative raw materials and are emission-free. |
|
Teknofloor® SS 30 panel with core made from a mixture of anhydrous calcium sulphate reinforced with organic fibres free of asbestos and any toxic materials. Panel with elevated resistance to mechanical strain and fire, excellent sound-deadening properties and minimal propagation of impact noise. Thanks to its characteristic stability of form and dimensions this type of panel is also able to guarantee that the floor is hard-wearing.
Processing is performed with grinding of the entire panel already backed with the surface so as to make it all perfectly suitable for the attachment of the self-extinguishing perimetral edge. The last step is to bevel the surface finish.
Total thickness with surface finish in resilient material or laminate approximately 32 mm.
Total thickness with surface finish in porcelain stoneware approximately 40 mm.
Total thickness with surface finish in stone from 40 to 50 mm approximately.
TECHNICAL DESCRIPTION:
REACTION TO FIRE: Class 1
RESISTANCE TO FIRE: REI 90
ELECTRICAL RESISTANCE: ≤ 2x10E10 ohm
SOUND DEADENING POWER: ≥ 38 db
DENSITY: 1500 Kg/m3
DIMENSIONAL VARIATION (after 24 hours immersion in water):≤0,3%
HEAT CONDUCTIVITY WHEN DRY 0,44 w/m2k
WEIGHT OF PANEL (with finish in resilient material/laminate):±17,5 Kg
WEIGHT OF PANEL PER SQ.M.(with finish in resilient material/laminate):±48,6 Kg
WEIGHT OF PANEL (with finish in porcelain stoneware): ±24,3 Kg
WEIGHT OF PANEL PER SQ. M. (with finish in porcelain stoneware):±67,5 Kg |
|
RAISED FLOOR WITH GRES OF CERAMIC
Nesite collaborates with best manufacturers of gres of ceramic in order to offer a raised floor with a wide rane of colours and finishing.
The ceramic tiles, available in dimensions 60x60 cm, 30x30 cm and 60x30 cm, are glued on Nesite panels with chipboard core, calcium sulphate core or cement agglomerate core.
Easy maintenance and high resistance to the abrasion make Nesite raised floor with ceramic the ideal solution for offices, banks, and area with high traffic level.
|
|
| SireFLO is Sire's new flooring system which, when used in the raised version, allows water to run quickly off the floor and onto the waterproofing shield below. An easy-to-lay, low-maintenance laying bed allows the creation of a cavity between the floor slabs and the flooring, which offers easy access for routing cables and pipelines and prevents thermal expansion and/or structural problems. |
|
Lumen means light !
With this floor system, you create a very special atmosphere. Lumen lets you see things that otherwise stay hidden.
Transparent, translucent or coloured panels - you have a free hand in designing your floor.
And we don't leave you in the dark when it comes to lighting technology. |
|
RAISED FLOOR WITH GLASS PANELS
Raised floor with glass finishing, made by panels 60x60 cm thickness 26 mm, with PVC protecting edge protezione self-extinguishing and no squeaking.
Also available with frosted finishing, it can be installed between panels with various finishing to make more prestigious the environment
|
|
Raised floors have become very popular in recent years, due mainly to technological advancements and the propagation of IT systems. Unlike a convention floor, this solution leaves space under the walking surface for routing lines for utilities (electric power, lighting and air conditioning), data transfer (IT networking and telephony) and automation systems (security and fire systems).
Rationalised space usage and superior functionality are made possible by the extreme versatility of this type of flooring, which may be modified easily, quickly and inexpensively. |
|
PVC: 2.0 mm thickness
Steel : 0.5 mm thickness, galvanized
Black PVC edging 0.4 mm thickness
Size: 600 x 600 mm
Height: 32.5 mm |
|
SANDWICH (PW4)
A very good compromise between chipboard and calcium sulphate panel, PW4 offers medium-high performances at a competitive price.
It is a panel 40.5 mm thick, made by high density chipboard core 28 mm thick coupled with calcium sulphate core 12.5 mm thick.
It is available with resilient and high class finishing
|
|
Skema Brio Top Level is completely compatible and can be combined together to create new solutions for your raised floors, thanks to the many elements which can be easily assembled together.
Woods, a selection of plain colours, ranging from light to dark, particular decorative effects such as surfaces that give an aluminium effect, marble or natural stones, and a large variety of other colours to order, are Skema's solution for the design and planning of all those places that need particular resistance, such as offices, shops, hotels, halls and business centres . |
|
|
|
Raised access floors
