Suspended ceilings: structures and accessories

35 companies | 191 products
Filters
  • What’s new?
    Submit

GemaGrid is designed as a two-component system and comprises primary and secondary profiles. The primary profile (U-profile) is system-independent and a permanent component of the suspension system for every Armstrong metal ceiling. This means that the same profile can be used for every ceiling system offered by...

Pour tous les systèmes de plafonds métalliques, Armstrong...

{{productDetail[52684]}}

Create the illusion of a smaller-scaled ceiling system without compromising accessibility with these sag, mildew and mold resistant...

This unique, economical and simply installed system provides a monolithic ceiling look with every benefit...

{{productDetail[59672]}}

The GEOSTAFF's fire resistant access panel can be installed vertically to access the technical ducts (PV n° 12-A-119 + Extension 12/1 B). With a fire protection of EI 60 to 120 (1 or 2 hours fire protection) , our access panels are complementary with our...

The GEOSTAFF's fire resistant access panel can be installed vertically to access the technical ducts (PV n° 12-A-119 + Extension 12/1 B). With a fire protection of EI 60 to 120 (1 or 2 hours fire protection) , our access panels are complementary with our...

The GEOSTAFF's fire resistant access panel can be installed vertically to access the technical ducts (PV n° 12-A-119 + Extension 12/1 B). With a fire protection of EI 60 to 120 (1 or 2 hours fire protection) , our access panels are complementary with our...

The GEOSTAFF's access panel are available in metal frames or gypsum. They fit perfectly to...

{{productDetail[123807]}}

Nicchio is the patented system of flush-to-the-wall room-dividing panels, able to satisfy differing needs to contain and close off areas.

Part...

LInvisibile Extra Closure range of products is enriched by the incoming of a new one: Extra Closures, a new system with flush-to-the-wall room-dividing closures and doors, conceived to offer the most suitable and practical solutions to contain and close off...

{{productDetail[11240]}}

Atena B43, among the T structure made in galvanized steel, is the one with the highest bearing capacity.

B43 is strong, solid and suitable to all needs.

B43 secondary profiles are available in different sizes in order to...

Atena Steel Strong Classic is most traditional and popular bearing system to realize false ceilings with visible T structure.

Easy...

Steel Strong Easy is an innovative structure for metal false ceilings, which puts together the simple setting up of Atena Steel Strong Classic with a new patented hook.



Steel Strong Easy structure has been...

Steel Strong Easy line mixes together the practical side of Atena T structures with the peculiar aesthetical detail of a coloured shutter.

This system...

Steel Strong Easy Fox is the T grid conceived to be lighter: although it is slightly thinner, Fox grid keeps the same qualities...

{{productDetail[52790]}}

With the exposed system the sections supporting...

With the exposed system the sections supporting...

{{productDetail[52786]}}

The COMPARTMENTS family is made up of a series of systems designed to enclose and complement any space.
These...

Door wing closure systems with an 87.5 mm deep x 30 mm thick aluminium door jamb.
Suitable for closing off wall or ceiling compartments that do not require internal finishing.
Designed for both...

Practical and elegant concealed attic doors for inspecting and/or repairing any pipes, cables, systems,...

{{productDetail[64396]}}
{{productDetail[67362]}}

Intro
Designed to fit into any type of ceiling system, allowing easy access into the cavity/void where regular maintenance to services is required to be carried out.

Description
This panel is designed to fit into the structural membrane of jointless plasterboard ceiling systems and is supplied with a beaded frame. The...

Intro
Designed to fit into any type of ceiling system, allowing easy access into the cavity/void where regular maintenance to services is required to be carried out.

Description
This panel is designed to fit into the structural membrane of jointless plasterboard ceiling systems. It is supplied with a beaded frame to allow for tape...

Intro
Designed to fit into any type of ceiling system, allowing easy access into the cavity/void where regular maintenance to services is required to be carried out. A choice of frames is available as shown below.

Description
This panel is supplied with a picture frame surround to enable it to be inserted...

Intro
Designed to fit into any type of ceiling system, allowing easy access into the cavity/void where regular maintenance to services is required to be carried out.

Description
This panel is designed to fit into the structural membrane of jointless plasterboard ceiling systems and is supplied with a beaded frame. The fully removable...

Intro
The Exitile Type EX/EG ceiling access panel is designed to fit into a â€Lay-in†/ Exposed Grid type suspended ceiling system. Various types are available, depending upon the type of grid and tile used:- 24 FLAT For use within 24mm wide Table Tee System using square edged ceiling tiles 24 TEG For use within 24mm wide Table Tee System using tegular ceiling tiles. 15...

{{productDetail[58401]}}

The DSC-214M is a distinctly superior door for new installations...

The DSB-214SM is a surface mounted door that does not require framing,...

The MC door is the most economical steel...

The KDW has a textured frame and bead so drywall joint compound...

The Press-Fit door is a unique lightweight door that installs...

{{productDetail[58406]}}

1200 Seismic ceiling suspension in Intermediate and Heavy-Duty options are the industry standard for suspended ceilings. All ceiling grid is compatible...

1200 HRCmax® Heavy-Duty seismic ceiling suspension is made with the industries highest standard recycled material content (65%) to help you maximize your LEED results....

1250 Fire-Rated (Stab) ceiling suspension in Intermediate and Heavy-Duty options is the industry standard for fire-rated suspended ceilings....

1260 Intermediate-Duty and 1280 Heavy-Duty seismic ceiling suspension tees are fire rated and made from hot-dip galvanized steel with aluminum cap for added corrosion resistance in interior environments....

1830 Intermediate-Duty ceiling suspension is made from HDG-60 hot-dip galvanized steel with aluminum...

{{productDetail[58426]}}

Movinord?s suspension systems can be used with all types of suspended ceiling: metal, mineral, plaster, wood, etc. The range consists of series 15, 24 and 35 inverted-T profiles and angle profiles. These are available in any of the 27...

{{productDetail[57945]}}

Linear grid systems are used for rooms that require flexible design. Dividing walls can...

{{productDetail[74256]}}
{{productDetail[119015]}}

The ALFA PARALLEL OPENING false ceiling by PROMETAL® responds to modern requirements - especially seen in offices and premises open to the public in general...

The ALFA CROSS OPENING false ceiling by PROMETAL® responds to modern requirements - especially seen in offices and premises...

{{productDetail[3531]}}

A necessity to implement inspection hatches is given where an access is required.

An access may for example be necessary in sanitary facilities where repair and maintenance works have to be carried through.

Jansen Maritim inspection hatches are extremely versatile. They can be implemented for different areas, such as walls...

{{productDetail[62838]}}

The Troldtekt access panel is available in three dimensions: 300x300 mm and 400x400 mm for direct installation in a Troldtekt...

{{productDetail[78130]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation