|
|
Touch free controlled hand dryer "Mr. Twister" for wall mounting, electronic warm air hand dryer, made of stainless steel, surface satin finished with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristic (easy to clean), material thickness 2 mm, casing with revolving shadow gap and curved profile, infrared sensor activity for non-touch operation, drip proof IPX1, sensor range adjustable from 5 to 33 cm, automatic power shut-off after 60 seconds, due to the extreme high adjustable air velocity the drying time is shortened massive although the blower output is not that high, cable and plug not included, incl. screws and dowels.
Electrical data: 230V, 50 Hz
Total output: 1500 W
Heating: 800W
Motor: 700W
Blower output: 120 m³/h
Air velocity 75-110 m/s
340x180x300 mm
|
|
Ref.: 49.24.04
Use: Medical buildings
Conditioning: Unit
Capacity: None
Completion/Color: brushed stainless
Category: B
0
Stainless hand dryers brushed AISI 304, thickness 1,5 mm
Automatic operation by electronic cell IR - IP 21
Classify II (connection 2 wire without grounding) - 220/240 V
1.640 W - Engine: 140 W
Air flow at exit of tube: 240 m3/H (4.000 l/min.)
Production of air of the fan: 280 m3/H (4670 l/min.)
Sound level: 60 dB (calculated at a distance of 5 meters)
Velocity emission of air: 65 km/h
Time of drying: 38 '' - Resistance: 1.500 W
Temperature at a distance of 10 cm: 52°C - Thermostat of security
Dimensions: 302 X 255 X 140 mm
Weight: 4,25 kilos
|
|
|
|
|
|
Hand dryers DUALFLOW new generation effectively dry the hands into 10 to 15 seconds thanks to the micro propulsion of a flow of massing air diffused at high speed.
Esthetics: of a design innovating and elegant, it is integrated harmoniously into all the styles of decoration.
Hygienic: its surface of drying is made up of a microbial anti material to prevent the development of the revivifiable bacteria.
Envisaging: an internal vat recovers free water of drying, to leave the impeccable places and to avoid the risks of slips. A sound and visual alarm informs you when the vat must be emptied (approximately 2000 and 2500 cycles).
Robust: it is conceived out of resistant super material for the most significant public places.
Comfortable and easy to use: Put your hands wet vertically in the part open in top of the hand dryers. Detectors are carefully placed in order to activate the air blasts dice detection of the presence of your hands. The hand dryers will function until the hands are withdrawn. If the hands are held during an excessive time, the hand dryers will stop after 23 seconds.
Classify II - IP 33
Body in ABS high 3 mm thickness strength (completion white ABS or ABS glossed color stainless)
Power engine: 880 W - Very high speed 30000 tours/mn, class F
Number of words: 2
Protector "microban" antibactérienne
Filter deodorizing in option
Time of drying short and effective - High efficiency - easy Maintenance and absence of waste - Low fuel consumption - Ecological
Conform to the European standards.
|
|
Hand dryers electronics with cell will infra red in white ABS.
Quality ratio/prices excels.
IP 21 - Classify II - Thickness of the body: 3 mm
Power: 1.640 W - Resistance: 1.500 W - Engine: 140 W
Air flow: 240 m3/H - Production of air of the fan: 280 m3/H
Sound level: 60 dB
Time of drying: 38 "
Guarantee 2 years
Dimensions: 302 X 253 X 153 mm
Weight: 3 kilos
|
|
Hand dryers electronics out of stainless AISI 304 glossed completion (exists out of white epoxy steel)
These hand dryers extraplat are integrated in any exiguous room.
The time of drying is high-speed
Thickness of the body: 1,5 mm (4 provided fastening screws)
Automatic operation by electronic cell IR - IP 23
Classify I - 100-120 V (9,5 A)
1.150 W - Engine 250 W - 50/60 Hz
Temporization: 120 "
Very powerful engine (adjustable speed manually by potentiometer)
Air flow at exit of tube: 61-98 m3/H (1.012-1.632 L/min.)
Production of air of the fan: 73-118 m3/H (1.215-1.958 L/min.)
Sound level (to 2 m): 64-74 dB
Velocity emission of air: 90-180 km/h
Time of drying: 10-12 ''
Temperature at a distance of 10 cm: 41-44°C - Thermostat of security
Dimensions: 289 X 266 X 100 mm
Weight: 3,6 kilos
Conform to the European standards 73/23/CEE and 89/336/CEE
Antivandalism - High strength
Guarantee 3 years
|
|
Hand dryers
- Maximum durability
- Infra-red sensor / auto shut-off
- Brushed metal housing
- TÜV approved
|
|
|
These touch-free dryers offer contemporary architectural styling. The 100mm projection complies with most barrier free requirements. The Surface-Mounted installation makes the new hand dryers ideal for additions or after-market renovations. Available in white coated steel (B-7120) or satin finish stainless steel (B-7128), these dryers enhance the look of any washroom. 115V or 230V.
|
|
Vitreous enamel, drawn-steel cover, white only.
115V AC, 20 Amp, 2300 Watts, 50/60 Hz, or 208-240V AC, 9-10 Amp. 1900-2300 Watts, 50/60 Hz, VDE approved and CE marked.
Limited warranty: motor brushes for 3 years; all other parts for 10 years.
Patented.
Installation: Automatic hand dryers should be installed 15" (380mm) above any projection or horizontal surface which may interfere with the operation of the automatic sensor.
|
|
Surface mounting.
Suitable for very high traffic facilities.
Ideal location: between the wash-basin and exit.
If installing automatic dryers over marble surface or ledge, the minimum distance from the dryer to the ledge must be 400 mm.
|
|
FEATURES:
- Quick Drying - Under 30 Seconds
- No Touch - Energy Efficient Operation
- Universal Voltage - Automatically Adjusts
- Modern Design and Durable
Electrical Specifications:
Motor: 1/4 HP - 7500 RPM - Brush Type
Voltage: 100-240 %u2013 50/60 Hz
Air Output: 180 CFM - Temp: 140° F (60° C)
Heater: 1620 Watts
Current: 16 Amps @ 120 Vac
Color Options:
Grey (see color chart)
Add suffix to Model Number.
White is standard if no color is indicated.
|
|
Making a hand dryer that works properly doesn't happen overnight.
In fact, Dyson engineers spent 3 years creating Dyson AirbladeTM. During that time they applied and developed entirely new types of technology.
|
|
Hand dryers - Serie FastFlow
Casing:
Aluminium, 2 mm thickness.
Casing finish:
Polished chrome.
Operation:
Electronic sensor.
Anti-vandalism structure.
|
|
XLerator® model for ultra-fast drying, surface mounting
- Series commutated, through-flow discharge, vacuum type motor/blower combination
- Infrared Optical Sensor with thirty-five (35) second lockout feature
- Air velocity of 16,000 LFM (linear feet per minute) at an outlet temperature of 135°F/57°C at a 72°F/22°C ambient room temperature
- Decibel Rating of 78-80 dB
- Heating element constructed of Nichrome wire and protected by an automatic resetting thermostat
- One-piece heavy-duty rib reinforced die cast zinc alloy housing
- Bright chrome plate or chip-proof electrostatically-applied epoxy finish
- Tamper-proof cover fasteners are included
|
|
One-piece channel frame is 1/2" x 1/2" x1/2" (13 x 13 x 13mm) type 430 stainless steel with bright-polished finish and mitered corners.
Phillips-head frame screw permits easy replacement of mirror.
No. 1 quality 1/4" (6mm) glass mirror electrolytically copper-plated; warranted against silver spoilage for 10 years.
Mirror corners and back protected by shock-absorbing material.
Back is galvanized steel secured to concealed wall hanger with theft-resistant locking device.
16" Width x 24" Height (41 x 61cm)
|
|
ROVAL™ STAINLESS STEEL MIRROR
20650
The gently radiused edges uniquely complement the curves of the ASI Roval™ Collection. Frame fabricated of 18 gauge type 304 stainless steel with satin finish and polished seamless mitered corners. 1/4" (6.4 mm) thick plate glass mirror. Warranted for 15 years against silver spoilage. Choice of sizes.
|
|
Hand - towel Paper Dispenser with semi Automatic cut. The Patented Cut system guarantees a perfect cut in time.
Available in different versions also with personalized and exclusive roll adapters.
|
|
Dispenser of brushed stainless steel towels (exists out of white epoxy steel)
Key closing, controls level. Provided fastening screws.
Frontal opening
Capacity: to 400 sheets of crimped or padded towels pre-folded
Dimensions: 400 X 255 X 130 mm
Weight: 2,5 kilos
Antivandalism
Guarantee 2 years
French manufacture
|
|
Satin-finish stainless steel.
Flush tumbler lock.
Dispenses 600 C-fold or 800 multifold towels.
Waste receptacle has 14.2-gal. (53.7-L) capacity.
Extends 5-1/8" (130mm) from wall.
Removable front panel for easy cleaning.
Includes patented LinerMate waste management.
|
|
Cabinet type 304 stainless steel, satin finish. Dispenses 300 single or 150 two-ply sheets.
Overall Size
10 15/16" x 5" x 2 1/8" (260 x 125 x 55 mm).
|
|
Wall mounted baby changing table.
White or granit finish.
Adapts to all areas.
Integral moulded dual liner dispensers.
The nursery room location is always much appreciated by parents, especially when they are far from home.
It is an essential service, which can be easily installed.
Beresford offers models adapted to the configuration of each establishment : nursery corner, special needs toilets, sanitary installations, corridors, etc.
Hygiene and easy maintenance are our priority.
A nappy vending machine can complete this equipment, offering 3 different size nappy kits, or a wall mounted infant seat, very handy to keep an older child in place a few moments while mum (or Dad) is occupied !
|
|
The nursery room location is always much appreciated by parents, especially when they are far from home.
It is an essential service, which can be easily installed.
Beresford offers models adapted to the configuration of each establishment : nursery corner, special needs toilets, sanitary installations, corridors, etc.
Hygiene and easy maintenance are our priority.
A nappy vending machine can complete this equipment, offering 3 different size nappy kits, or a wall mounted infant seat, very handy to keep an older child in place a few moments while mum (or Dad) is occupied !
|
|
Electronic Hand-towel paper Dispenser with infrared sensor operation. Available in White colour or Silver Satin finish.
Also available the Electronic Soap Dispenser and an Airfreshener.
|
|
|
Touch free controlled soap dispenser "Mr. E Proper" for wall mounting, stainless steel, surface satin finished with InoxPlus surface refinement for the reduction of finger marks and better cleaning characteristic (easy to clean), material thickness 2,0mm, casing with revolving shadow gap and curved profile, key and lock made of stainless steel, inspection window on front, Infrared sensor activity for non-touch operation, red light shows battery status, incl. 6 pc. 1.5V (=9V) Alkaline AA batteries, suitable for liquid soaps and lotions, 800 ml soap tank, depending on soap between 0.6 and 1.1 ml is dispensed, incl. screws and dowels.
|
|
Electronic Soap Dispenser sensor activated. Battery operated. Cartridge version. Available in White colour or Silver Satin finish.
Availble with a complete top quality Soap Range and with Sanitizing Solution alchool based, specially formulated to kill 99,99% of virus and bacteria.
Also availble in the range the Electronic Hand-Towel paper Dispenser and the Airfreshener.
|
|
|
Wall-mounted electronic soap dispenser. Electronic circuit, soap container and pump contained in one single box in 1-mm thick stainless steel. Outer plate in 2-mm thick AISI 304 stainless steel fixed with vandal-proof stainless steel screws. Adjustable quantity of soap delivered through a self-priming pump. Electronic circuit endowed with built-in automatic anti-dripping device. Soap container (max. capacity: 1 l) in anti-acid material allowing the use of soap or disinfectant of any type. Equipped with 220/18 Vac safety transformer approved by IMQ. CE certified.
|
|
Stainless Steel Soap Dispenser in two capacities: 1000 ml or 500 ml.
Versions availble: cartridge - soft pouch - refillable bottle - Foamer.
Availbale in bright finish or satin finish.
Stainless Steel INOX AISI 304 - 0.8 mm. thick. Wide front viewer, key lock system with dedicated steel key.
The complete range includes: Hand-towel tissue paper Dispenser, Jumbo Toilet Roll Dispenser and Soap Dispenser (refillable - cartridge- soft pouch - foamer) and paper/dust bin.
|
|
Stainless Steel Soap Dispenser. Capacity: 1000 ml or 500 ml
Versions available: Refillable - Cartridge - Soft Pouch - Foamer
Finishes: brushed with square decor or bright finish with round decor
The complete range features the following elements:
Jumbo Toilet Paper Dispenser
Tissue Toilet Paper Dispenser
Hand-towel Paper Dispenser
Paper Basket
|
|
Soap dispenser to be embedded on the washbasin of wash-hand basin
Filling by the top
Out of chrome brass, unbreakable stainless stem (nozzle of 100 mm or 150 mm)
Key closing (provided) - Antivandalime
For the installation: to bore the worktop of a diameter of 25 Misters Encombrement under the washbasin: maximum: 350 mm - minis: 220 Misters.
Apparent height: 80 mm
Length nozzle: 150 mm - Diameter nozzle: 8 mm
Height bottle: 200 mm - Diameter bottle: 80 mm
Capacity: 1 liter
Filling: bulk
Weight: 0,80 kilo
Guarantee 2 years
French manufacture
|
|
Liquid soap dispenser in bulk or thermocellée cartridge of 0,6 liter out of brushed aluminum (exists in epoxy white)
Capacity: 1,250 liter in bulk
Distribution of the soap by pull knob
Chrome lid and ambase
Key closing
Indicator of control of level
Fixing 3 screws including 1 theft protection device (provided)
Antivandalism
Guarantee 2 years
French manufacture
|
|
|
|
Public sanitary wares: accessories
