|
|
|
|
|
|
It is an equipment designed to generate a uniform mixture of air and water in the area where the diver enters the pool. With this foam like cushion, the diver can concentrate on learning the mechanics of the dive, without fear of injury.
The coach controls the system with a hand held remote, that starts and stops the instant air release.
He can therefore start the system before the diver leaves the tower or board and stop it as soon as the diver has entered the water. The normal bubbling period lasts 7 seconds.
Air safety cushion for diving
The system includes a high pressare compressor, with a large capacità air tank which regulates the released air through a series of spargers in the floor of the pool. It produces an air cushion that allows the diver to practice the most difficult of dives without risk of serious injury when entering the water.
The system has been installed worldwide in Olympic and similar high level facilities. The coach controls the system with a hand held remote, that starts and stops the instant air release. He can therefore start the system before the diver leaves the tower or board and stop it as soon as the diver has entered the water.
|
|
Castle 2
lenght = 400 cm
width = 100 cm (+300cm slide)
start platform height = 75/135 cm
pump power = 24m3/h
|
|
Splash and leisure pools
When the traditional swimming pool incorporates an amusement or relaxation area, accessories and special structures are often used to create a variety of special effects.
Because of its versatility and the possibility of integrating all types of accessories and water features, Myrtha® Technology can always offer a perfect solution.
We supply a wide range of products that allow pools for hotels, camping, tourist and residential facilities to be animated, just like the local leisure pools . We offer a wide choice of options for any part of the leisure pools , indoor or outdoor.
|
|
¬ Swimming pool heating installation. It uses night rate electricity in hotel complexes, sports centres, clubs, private homes, buildings, and so on.
¬ This energy is the most economical, safer, reliable and the least polluting.
¬ Maximum heating time is 8 hours (23h-7h is the normal night rate tariff). If you heat up for 24 hours a day, you should divide by 3 the power shown on the table.
¬ This is the consumption during the coldest day. The rest of the time, the consumption will be lower than the one shown on one on the table.
¬ The information appearing in "Technical data" is only valid for outdoor swimming-pools when the outside temperature is not below 15ºC.
|
|
|
|
|
|
Get that warm-all-over feeling
For indoor or outdoor installations on pools and spas. Features include an LED temperature readout with dual thermostat controls, temperature safety lockout, and 6-position control panel. PMG burner technology requires no outdoor draft hood. Proven Dura-Glas® rust-proof construction with plastic manifold and PVC union connections. Heavy-duty unit with cupro-nickel exchanger stands up to the harshest of applications, like low pH, high flow or heavy use.
An Eco Select™ Choice: Max-E-Therm® high performance heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Lightweight - Lightest heater in its class
Compact Design - Ideal for retro-fit installation
Easy to Switch - Change gas sources with installation of separate orifice
Environmentally Friendly - All units are low NOx
Rustproof Housing Sleek, matte black enclosure is made of{PROD:Dura-Glass - an exclusive Sta-Rite material that handles the heat and weathers the elements
Lower Operating Costs - 84% efficiency rating - rated 1st in its class for highest energy efficiency
Custom or Retrofit - Direct-connects to Sta-Rite System:3® Mod Media filter or easily fits other systems
|
|
Ultra-high performance in a compact, quiet, and eco-friendly design
MasterTemp® Heaters offer all the efficiency, convenience, and reliability features you want in a pool heater, plus a lot more fast heat-up, compact design, super quiet operation, easy to use, and eco-friendly.
An Eco Select™ Choice: MasterTemp® Heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Heats up fast so no long waits before enjoying your pool or spa
Best-in-class energy efficiency
Manual gas shut-off when service is required
Eco-friendly MasterTemp® is certified for low NOx emission and outperforms industry standards
Rotating digital display allows for easy viewing
Tough, rustproof exterior handles the heat and weathers the elements
|
|
|
A Raft! Or the foundation to many games and events. Also an indispensable element of the Aquatrack..
|
|
|
Crossing a bridge has never been so much fun! Face the challenge and choose your way to overpower this barricade.
|
|
|
Measure your vertical over the crossbar. Don't worry about the landing, because it`s definitely soft.
|
|
|
Take off, leap and land! The special marking Baton will leave no error in who can jump the farthest.
|
|
|
Gold, Silver, Bronze... a three level Podium that will honour all medallists competing in the Aquagames events. Or use it as an obstacle in the Aquatrack!
|
|
|
If you want to be the fastest you need to get across. Jump, walk or swim! Make a fast and good decision.
|
|
Multiple Docking station to Wibit products. Use as a Stadium on the water.
Available in two different sizes.
|
|
|
Try to walk this long and narrow beam. Will test your balance and concentration. Make sure that your opponent contacts the water first.
|
|
|
A human powered boat, propelled by a double bladed paddle. Aerodynamic design allows for easy manoeuvrability, stability and speed.
|
|
|
Conquer the last modul of the Aquatrack in gracile elegance. Climb to the top and glide into the water.
|
|
|
Allows for a 90° turn in combination with any Wibit product. Produces unlimited combinations and configurations.
|
|
|
Combine speed, strength, and agility. Taking on this "mountain" is more than a challenge. Take your chance..
|
|
|
Clearly display the score. Use Velcro to quickly double as a Goal. Perfect for Kayak Polo or Water Polo.
|
|
Bring fun and exciting to your pool with the Wibit Aquatrack system
Wibit's trademarked Aquatrack™ System – is the core element used in waterplay. Designed fpr commercial pools and resorts, Wibit has done away with the hassles of constant air systems and introduces a simple inflation technology – just inflate once ant it's ready to play.
The quality construction is just of the reasons Wibit products meets or exceeds the tough German TÜV safety standards. Another is their "Interlocking Docking System" - allowing infinite arrangements of Wibit modules to keep kids from getting bored. Create various lengths with endless configuration possibilities... use individually or as an Aquatrack.
|
|
A moveable bulkhead is a special feature that allows you to carry out different activities at the same time within one pool.
It is an easy to manoeuvre structure that can be moved along the pool and fixed at the point desired. It moves on wheels positioned on the shorter sides of the structure, which run along a metal rail positioned on the edge of the pool.
The moveable bulkhead has a tubular grid frame that runs along the whole length of the wall, while the surface that can be walked upon has an ABS grid whose loaded bearing capacity is reinforced by the steel structure beneath.
The lateral vertical surfaces are also made of ABS panels and guarantee aesthetic continuity with the vertical walls of the pool.
The bulkhead runs along the whole length of the pool and its standard width is 110cm. Wider bulkheads are available upon request.
It has a safety grip positioned at water level, both sides have anchorage for floating lines and starting blocks can be easily assembled
|
|
|
|
|
|
This allows a single pool to be used safely for several activities at the same time as it can separate areas for swimming, teaching and diving. Myrtha bulkheads are constructed of stainless steel tubular profiles welded together. They are shipped in sections and installed on site. Anti-skid plastic slats of durable PVC cover the bulkhead. The slats are reinforced and connected by square stainless steel profiles, which can be easily fixed to the structural frame. A range of colours is available: white, pale grey or pale blue.
Movable bulkhead >> stainless steel pools
The bulkhead allows various activities to take place in the pool at the same time. The structure consists of stainless steel pools or composites square section beams, covered with special anti-slip ABS flow through grating.
The movement is obtained through two stainless steel flywheels positioned at each end of the bulkhead and a patented double-chained reduction gear can be used to further assist movement or thanks a patented motorized system.
The structure therefore moves easily through the water with the added advantage of a rail track system embedded in the deck that help sto keep the bulkhead square.
Unlike other floating systems, the bulkhead designed by Myrtha Pools® has the advantage of an extreme accuracy and regularity of movement along the pool, in perfect concordance with FINA regulations.
|
|
Variopool supplies three types of booms or bulkheads in order to efficiently divide pools into multifunctional areas to hold various activities simultaneously. For example, a 50m competition pool with two bulkheads can be split into three separate areas for maximum productivity.
The various user groups can now operate individually undisturbed while the pool is used to its maximum potential.
|
|
The movable floor allows the use of one swimming pool for several activities: competitions, baby swim, aqua dance, disabled/remedial activity, swimming instruction, diving, activities that require different levels of water depth.
The extreme functional capacity of this floor consists in the fact that the mechanism thanks to which it moves, unlike the one of other movable floors, is placed along the walls and not on the floor of the pool, that can therefore be easily cleaned in every point, also with automatic cleaners.
The movable floor is furthermore provided with all the safety elements required from the international regulations: in fact it is closed frontally by a floor connection flap, or by a bulkhead, that have the purpose to stay fixed against the floor when this is lifted.
|
|
|
A Variopool movable floor transforms a standard depth pool into a multifunctional pool allowing a greater number of aquatic activities to take place during a single day. The depth of the pool can be adapted at any time and you can even create a gentle slope. The number of additional activities created by the movable floor will attract a greater number of users to the pool generating more income for the facility. Additionally the pool can now adapt itself to any new future activities requiring a different depth or pool layout.
|
|
|
|
|
|
A unique product is the Inducon moveable floor. The floor not only makes the pool depth variable. In the highest position, it also makes a rigid, load-bearing floor that transforms the water surface into, for example, a dance or fitness floor. Simultaneously, it also acts as an insulating cover.
Inducon has 3 types of moveable floors:
Scissors system
Push Chain system
Actuator system
A brief summary:
The Inducon floor driven by the Scissors system has an external drive. The low voltage electric motors are installed in an adjacent dry service chamber. This heavy duty system is suitable for larger installations in the order of 200 m² and above and domestic installations where a heavier decorative surface is required e.g. stone, marble.
The Inducon Push Chain system recently won an award for Innovation. This unique system has the advantage of only requiring an installation depth of around 45cm - 60cm depending of the type and size of the installation.
Our third system, is called the Actuator system. The movement of the floor is driven by spindles each of which incorporate a 24 v DC motor. The drive motors are built in underneath the pool floor and do not need a dry service chamber.
Scissors system
The moveable floor driven by the Scissors system is based on the Inducon spindle drive. The advantage of the spindle drive is that by using two push rods instead of one there is a more even distribution of lift. There is no pressure exerted on the pool walls which could cause long term problems. There is a more even speed of upward lift of the pool floor on larger installations.
|
|
|
Vertical or Submersible bulkheads divide a swimming pool into two separate areas from one fixed location. When lowered the bulkhead disappears into a trench and becomes part of the pool floor.
|
|
|
|
|
|
New building board with factory-installed vapour barrier
wedi “BA Vapor” building board
The wedi “BA Vapor” building board with built-in vapour barrier is being introduced for all rooms subject to high vapour pressures and temperature differentials.
Already installed at the factory, the epoxy resin vapour barrier saves the craftsman valuable installation time, guarantees reliable sealing and makes it possible to apply high-quality wall covering rapidly. “BA Vapor” is suitable for all surfaces to be covered with ceramic tiles or plaster.
Especially in buildings with swimming pools, steam baths or communal showers, elevated air humidity is a permanent condition. Sound structural engineering principles require the addition of a vapour barrier when incorporating thermal insulation in such walls.
With the new “BA Vapor” building board, however, thermal insulation and the vapour barrier can be applied in a single step. wedi sealing tape is used to protect joint areas and openings against humidity and steam.
“BA Vapor” boards measure 2.50 x 0.60 metres and are available in thicknesses of 12.5 millimetres, 20 millimetres and 50 millimetres.
|
|
|
|
Public swimming pool equipment
