|
|
Abrivoyageurs 02
Description
Polished granite, roof in glass fibre reinforced concrete
External wall: Surface sand-textured
Base 12cm
Bench surface polished
Protective paint "Anti-Graffiti", side wall partially vitrified (laminated safety glass 10mm)
Poids / Taille
4 Tonne(s)
|
|
|
This bus shelter is composed of two 120 x 10 mm tubular, front load-bearing, seamless, cold-drawn columns, with a 20 mm thick 300 x 300 mm base plate. The monolithic roof overhangs the columns and consists of 2 horizontal 100 x 3 mm tubular ledgers upon which seven 12 mm thick shaped steel elements are welded. Special seals hold the 5+5 mm safety glass in place. The glass panes are silk-screen printed for protection from sunlight. The bus shelter has to be placed onto a concrete plinth, built at the same level of the finished floor. All steel parts are galvanized and polyester powder coated. The 12 mm thick rear and lateral glass walls are tempered safety glass and fixed to the roof and lower support structures by special clamps. The 15 mm thick laser-shaped bench supports are welded to the 20 mm thick 300 x 300 mm base. Dimensions and characteristics of the bench are the same for all Gea benches. This bus shelter is provided with a lighting system. All fixings are in stainless steel.
|
|
|
Want your message to become a moving billboard? Fleet graphics and transit advertising are a perfect solution to your promotion needs. We offer cost effective and durable graphics that are UV stable and withstand repeated washings.
|
|
|
In November 2004, JCDecaux won the first street furniture contract in Japan and installed 500 bus shelters with advertising panels in Yokohama.
|
|
DIMENSIONS VISION +
- Length: 7.010 mm
- Width: 3200 mm
- Other dimensions on request
STRUCTURE
- Square Tube of 60 mm - intermediate mast: tube square of 60 mm
MELTS Of SHELTER
- Plate polycarbonate - thickness 6 mm
- Return (S) glazed (S) in front frontage
ROOFING
- Roofing alveolar or full LDC polycarbonate thickness 4 mm
SURFACE TREATMENT
- Hot Galvanization, completion powders polyester
GUTTER
- Open Tube with recovery of rain water
GALVANIZATION
- Hot Galvanization, completion powders polyester
SEALING
- Sleeves, height: 450 mm
- Possible Adjustment of the levels
RAL
- Chestnut RAL 8017 - Green RAL 6015 - Gray metallized RAL 9006
|
|
Dimensions:
Simple shelter, depth:
- 2,50m X 4,00m
Flexible shelter (see tariffs)
Description:
CONSTRUCTION:
Framework tubes galvanized steel of it
- feet on platinum 200 X 200 X 5 mm
- alveolar polycarbonate cover anti-UV, ép. 6 mm - screws and bolts d´assemblage out of stainless steel classifies A2 - posts, members and cross-pieces 60 X 60 X 3 mm
- arches of roofing 60 X 30 X 3 mm
- gutters collecting the E.P in the posts
|
|
Dimensions:
4m X 4m
Description:
CONSTRUCTION:
- square post tubes of 80 X 80 ép 3 mm - coated sheet roofing HACIERO - cable stainless - upperworks marine.
- flanged sheet gutter ép 4 Misters.
|
|
Cantilever canopy BORGO
Cantilever canopy for bikes, motorcycles or benches. It is a single arched cantilever canopy with support stands.
The BORGO cantilever canopy is built with a support structure in aluminum reinforced with hot galvanized steel and then painted with the same treatment used for aluminum painting.
The cantilever canopy is made up of a circular section cover made with extruded aluminum alloy 6060 T5 curved profiles that are weatherproof thanks to Heat-hardening painting treatment.
The unique shape of the curves, the EDPM sealers, joined by the innovative "Barrel CO.IN. System", permits free dilation of the covering slabs with the elimination of silicone use or unsightly screws
|
|
Shelter FITS LATTICEWORK ON/STORAGE - Multitplier the protectors.
Modulate basic length of them 3 and 4 meters
Roofing "plexi colorless Resist".
Arches curved and enamelled aluminum (Qualicoat quality).
Beams steel sanded, metallized, enamelled (Qualicoat quality).
Sides total or partial closing of wood, bars metal or grill.
Posts steel sanded, metallized and enamelled (Qualicoat)
Several possible adaptations on our various models of shelters
taking again the principal framework, we adapt the sides for one
parking 2 wheels, long life, reinforced protection or storage.
|
|
Shelter VENDOME - Protector & space.
Modulate basic length of them 3 or 4 meters,
a capacity of maximum parking 7 bicycles (9 on version 4 m).
Curved and enamelled arches aluminum (Qualicoat).
Roofing "plexi colorless Resist".
Beams steel sanded, metallized, enamelled (Qualicoat).
Rail support forks sanded, metallized steel (80 µ) enamelled,
- 7 pairs of forks supports handlebars out of cast aluminum
provided with 7 cables steel Ø 13 mm sheathed PVC
Posts steel sanded, metallized and enamelled (Qualicoat)
option: coating laths out of treated sawn timber or latticed closing.
|
|
Shelter CLAIRBOIS - A natural variation.
Modulate basic length of them 3 or 4 meters,
capacity of parking of 7 bicycles (9 on version 4 m).
Curved and enamelled arches aluminum (Qualicoat).
Roofing "plexi colorless Resist".
Beams steel sanded, metallized, enamelled (Qualicoat)
associated of an interior/external treated sawn timber coating.
Rail support forks sanded, metallized steel (80 µ) enamelled,
- 7 pairs of forks supports handlebars out of cast aluminum
provided with 7 cables steel Ø 13 mm sheathed PVC
Posts steel sanded, metallized and enamelled (Qualicoat)
side treated sawn timber coating.
|
|
Multifunctional covering structure for family, ideal for bikes, motorbikes,
garden's tools, toys, plants, firewoods, etc.
Light structure, solid and simple assembly procedure.
Frames made of galvanised steel with legs, roofing and side walls with acrylic white double glass slabs and grooves made of pure anodized aluminium.
|
|
Covering structures with a simple and rational design, manufactured with great attention given to every detail.
Base and grooves made of galvanized steel or pure anodized aluminum. Upper structure built with a patented system consisting of weight carrying beams and other parts made of pure anodized aluminum, including the support elements and the clamps for colored acrylic glass slabs.
Very simple assembly procedure. The assembly of every component and the setting up of the acrylic glass slabs does not require any drilling. The radius of vaulted covering structures and the inclination for those shaped like pyramids can be altered. Static characteristics are conforming to European
|
|
|
The SPACE cover is constructed from a galvanised and polyester powder coated modular structure with Ø 152x4mm, Ø 102x2mm and Ø 60x2mm tubular steel supports, reinforced by 10mm steel plates and a cover in 10mm thick honeycomb polycarbonate sheets, supported by a system of 3 and 2.5 mm thick steel sheet ribs and counter-ribs and by the Ø 40x3 mm tubolar steel front profile. The structure can be single or double sided and is fixed to the ground through a galvanised steel plate with suitable anchoring bolts. The double structure is supported with a security tension rod in ø20mm drawn steel. The rain water drain is possible directly through the supports, connected appropriately to the gutter. The structure is calculated for a snow loading of up to 128 daN/sqm and for wind speed of up to 90 km/h. Length of each module: 3000mm, height: 2400mm, depth: 2750mm (single sided), 4854mm (double sided).
|
|
Roofed bicycle racks and lockers, the Netherlands.
Curved tempered 8 mm float
|
|
Inviting bicycle parking lot
Already from a distance Galleria is visible and loads optically responding to bicycle parks in. The roofing system offers flexible lengths and is thereby individually flat and applicable. Likewise there are Galleria also with different cover materials.
|
|
|
The tensile structure for the Lalla Grill Restaurant, located at the Del Monte Shopping Center in Monterey, California, covers nearly 1,000 square feet over the outdoor patio dining area. Three saddle shaped membranes are made with Ferrari 702-T2 PVC fabric and supported with stainless steel cables and fittings from Frontier Technologies.
|
|
|
The Parkwest Medical Office Building Project is a 2000 square-foot tension structure designed to cover the main entrance and compliment the architecture of the building. There are four 20-foot masts supporting the Ferrari 702-T fabric which span approximately 65-feet in length.
|
|
This premium Southern California Entrance Canopy provides weather protection with first class style. Every column and every beam on this elegant frame has been hand crafted to a tapered width in order to meet the design requirements specified by the client. The single mast design minimizes obstacles near the building entrance. The 12' projection and 22' width allow for ample protection from rain or sun. The midspan rain gutter system collects water and diverts it off to the sides of the canopy.
- Stainless steel cables and fittings provided by Frontier Technologies.
- The frame of the structure was completely welded with a very high attention to detail to provide a smooth architectural finish. No bolted field assembly parts were permitted.
- The tension roof membranes were fabricated from Saint Gobain's PTFE product Sheerfil V®.
|
|
|
The multi-functional Wave structure is ideal for a variety of applications. A unique modular design with numerous possibilities. This proven architectural product offers the price advantage of a pre-engineered structure combined with the design flexibility of a custom built system.
|
|
- Type of structure:Covered playground at Croizat School — Vaulx en Velin - France
- Dimensions:18 m x 6 m
- Fabrics used:Ferrari® Précontraint, ref. 1202 color shade, white
|
|
|
To cover both doorways to the property this striking hyperbolic form was designed drawing maximum attention made from PVC coated polyester with a powder coated galvanised steel tubular frame.
|
|
Characterized by its hexagonal form with reversed S curve giving him a very current "look", Funshade is a structure of the garden umbrella type covering a surface of 49 m ² with only one central mast.
Its performances and its flexibility in use make of Funshade an ideal product for the provisional cover of external spaces: terraces of coffee, restaurant, centers of leisures, exhibition stands, bus shelter,...
Funshade has a very great wind resistance (up to 100 km/h), and profits from remarkable qualities of stability, resistance and longevity.
Delivered in kit ready to go up, it settles quickly, and can easily be dismounted/gone up one season on the other.
Funshade is also personnalisable thanks to a broad choice of colors
|
|
|
The project is comprised of (29) 8 inch diameter posts, each standing 24 feet off the ground, and (14) canopy modules, each at 16 feet wide and 32 feet long. The canopy module frames are made from 6 inch diameter rolled steel. Each canopy module was designed with two layers of mesh PVC fabric membranes (Ferrari 492). The two layers of fabric create a dynamic kaleidoscope effect as you stroll beneath the shade. At night, the canopies are well lit with a revolving spectrum of colorful lights.
|
|
|
Both economic and modular, the Hull Walkway can be joined together to span large areas making it an ideal solution for an outdoor teaching area, extension to business premises or link walkway.
|
|
|
The iconic Pagoda structure is a truly multifunctional canopy - it can be extended in infinite widths and lengths to create both clear span cover and cover with internal supports. Easily installed and demounted it is most suitable for education establishments and the modular system allows many permutations of layout.
|
|
|
The highly functional, cost-effective Pow-Wow canopy is free-standing and quick to install. Using organic timber it is the ideal sun shade design for green spaces and urban school settings.
|
|
The tensostruttura is the typical tipologia of the architecture weaves them to free geometry.
The roofing is constituted from a liner in polyester to double spalmatura of PVC, and according to the tipologia chosen, they can be employed various types of technical fabrics.
The tensostrutture to carrying arches, can have the structure in wood, iron or aluminum, and be to mono or double coibentante liner; the advantages of the double liner are the reduction of the thermal coeficiente in the ambient inside, the reduction of condenses and a smaller acoustic resonance
The Tensostruttura can find its application for the roofing of the fields from calcetto, special fields from tennis, handlings, race courses, roofings for manifestations and concerts, fairs, incomes and so on.
|
|
|
|
Urban furniture: shelters
