|
|
|
|
|
|
Biomac® is a range of biodegradable blankets used for temporary erosion control. These roll erosion control products (RECP) act as a reinforced mulch protecting the seeds and soil from erosion. It also holds the moisture and accelerates germination and vegetation establishment. Biomac® is made of a variety of biodegradable materials like Biomac® S from straw, Biomac® SC from straw and coconut and Biomac® C from coconut fibers only. Each Biomac® type has a different degradation period in relation with its environment; the Biomac® S will be the less durable and the Biomac® C will be more durable.
Biomac gives nature a helping hand at the revegetation stage by:
Ground protection - at the most vulnerable stage, unvegetated surfaces in conjunction with an ECB are protected from water and wind erosion preventing gullying and loss of topsoil. Rain and water run-off is considerably reduced.
Moisture retention - rain water run-off is minimized and soaks through the blanket and allows soaking of the underlying soil: prolonged capillary storage improves seed germination.
Seed protection - newly planted seeds are protected against wind, rain and native wildlife.
If you are interested in downloading our technical data sheets, please go to documents.
|
|
For all that requires a final delimitation between hard surfaces, as asphalt, resin, gravels, paved... PLANTCOprotec® borderline road is the solution.
Manufactured starting from an aluminum 6005A high-quality recycled, PLANTCOprotec® borderline road is solid, flexible, elegant and discrete. PLANTCOprotec® borderline road allows a solid jointing of surfaces without inequality, crack or overflow.
Advantages:
- flexible
- resistant
- aluminum 6005A recycled
- several heights available
- angle with 90° available
Applications:
- tar
- gravels
- resin
- paving stones
|
|
|
In the residential and commercial construction and renovation industry a multitude of factors can influence the type of floor drainage system which is to be installed. Whether it is a code regulation, a designer's specification or a private need, the floor drain to be installed can often take on various qualities. In order to supply the market, KESSEL offers a wide variety of floor drains to meet every aspect of the industry's needs.
|
|
|
Light, flexible and supplied in rolls,teradrain® is quick and easy to lay whichever model is selected, with cost-effectiveness optimised for all sites. A special feature is incredibly quick and easy assembly by thermal bonding using a simple, easily obtainable hot-air gun. This joins the strips firmly together and ensures continuous filtration and drainage.
|
|
Enkadrain Wide
Cordrain is an efficient, economical vertical drainage of walls and other subground structures
Cordrain has been specifically designed to reduce hydrostatic pressure behind structures such as retaining walls and bridge abutments. It is also ideal for draining foundations and basements, reducing the likelihood of structural damage caused by foundation movements in expansive soils. The impermeable core provides the added benefit of assisting in the waterproofing of structures which may reduce the functional requirement of a tanking membrane.
Cordrain is supplied in 1.2m x 25m rolls which weigh only 30kg making them well suited for installations on steep building sites where traditional drainage gravels provide logistic problems for the installer resulting in higher installation costs.
|
|
|
|
|
|
MacMat-R
MacMat®R is a three-dimensional geomat that can be applied as an erosion control mat for sloped embankments, channel linings and soil-veneer applications. It was developed to meet the need for an erosion control material which was both strong and environmentally acceptable. MacMat®R is manufactured with a double twist steel wire mesh reinforcement inside the geomat, to provide tensile strength and a stronger form of erosion protection to better ensure the stability of the topsoil on roadway embankments, channels linings and other areas susceptible to erosion damages.
MacMat® R has several advantages:
The continuity of the lining is easily achieved by lacing the edges together with binding wire or metal rings without overlapping and minimising the wastage.
In many standard situations a simple fold into the top of the slope of an anchor trench could be used, being wooden stakes or other anchors sufficient to anchor the wire mesh to the ground.The double twist wire mesh protects the geomat from any potential damage limiting those to a single mesh opening.
The steel reinforcement provides high stiffness to the geocomposite and an uniform adherence to the subsoil providing better protection of the covered surface.
It may be easily fixed to any thicker lining or bottom protection (gabions, mattresses, etc.) providing a better and continuous protection and anchorage where the erosion is usually more critical or the stresses are concentrated.
The combined use of a geocomposite reduces to 50% the installation costs over a double layer system.
Research
To determine MacMat®R performances under various hydraulic conditions, a series of tests have been carried at Utah State University (USA) to evaluate the anti-erosion capability of the geocomposite during varying flow conditions. The allowable shear stresses on the geoomposite have then been evaluated. The diagram to the right reports the results of this research about vegetated (red) and unvegetated mats (green).
MacMat® R is supplied in 2m x 25m rolls
|
|
|
TenCate Polyfelt Polymat erosion control mats (ECM) are monofilament Geomats made from polypropylene, with or without Geogrid reinforcement. The structure with its extremely high voids content reinforces the upper 1 to 2 cm of the soil, thereby preventing surface erosion on slopes and offering permanent support to topsoil and vegetation.
|
|
|
Rock PEC is a geocomposite consisting of continuous filament non woven, reinforced by high tenacity polyester yarns. Rock PEC is available in a wide range of tensile strengths, unidirectional and bidirectional. Special types can be manufactured on request.
|
|
Steep slopes, river banks, ditches, spillways and other exposed areas are often prone to damage caused by erosion due to wind or water.
Terram Erocell can help to prevent erosion by confining soils and aggregates to within the cell structure. Varying degrees of protection can be afforded by selecting alternative in-fill materials. Seeded topsoil provides protection for less exposed areas. Protection may be increased by introducing vegetation such as small shrubs. For greater protection, a granular in-fill can be used in certain circumstances. Appropiate in-fills can also be chosen to give a desired surface appearance. The standard Terram Cellular System for erosion protection, Terram Erocell, is normally suitable for use on slopes with an incline of up to 45 degrees (1:1 slopes).
|
|
Preventing soil erosion, carrying out development works and landscaping
with topsoil often involve the use of ridged geosynthetic structures.
|
|
|
|
|
|
Enkagrid PRO and MAX geogrids are reinforcement mats of solid polypropylene or polyester bars or aramid fibers. The aramid fibers of Enkagrid TRC are embedded in nonwoven filter layers.
The polyester or polypropylene bars of Enkagrid PRO and Enkagrid MAX are laser-welded together precisely to form an open, permanent and strong structure for soil reinforcement and soil stabilization. The use of highly oriented polymer bars allows Enkagrid to meet the requirements of the most demanding engineering structures. Compared with polyester or polypropylene multi-filaments, the solid bars with their low specific surface area are much more resistant to aggressive chemical attack and mechanical damage from soils.
The woven aramid fibers of Enkagrid TRC are thermally bonded into a nonwoven.
The geogrid composite combines a number of functions in a single product delivering reinforcement, separation and filtration.
The materials used in the production of Enkagrid geogrids are environmentally friendly, as they do not react chemically with their environment in any way.
When it comes to soil reinforcement and stabilization, Colbond can draw on over 20 years experience. The first flexible geogrid was launched in 1986. The experience gained since then has provided the basis for the development of today's state-of-the-art Enkagrid product family.
All Enkagrid geogrids deliver:
- Reinforcement for all soil structures
- A perfect combination of geometry and polymers to provide the ideal soil-grid
interaction for all soil types
- Outstanding permanent mechanical strength and long-term durability
- Ease of handling and installation
- Wide range of product types to suit the specific needs or your project
- Proven design programs, a design service and technical back-up for a reliable
effective design
The Enkagrid geogrids are divided into three groups, characterized by their main applications:
Enkagrid PRO (e.g. Enkagrid PRO 90)
- Uniaxial geogrids of extruded polyester bars
- Suitable for the reinforcement of slopes, embankments and walls with different
facings, BBA certified and approved (British Board of Agrément)
- Available in five different tensile strengths, as a result highly economically efficient in
use
Enkagrid MAX (e.g. Enkagrid MAX 40)
- Biaxial geogrid of extruded polypropylene or polyester bars
- Absorbs forces from dynamic and static loads
- Suitable for the stabilization of weak soils underneath paved and permanent unpaved
roads, structural foundations or embankments
- Can help to reduce sub-base thickness by up to 30%, depending on local conditions
Enkagrid TRC (e.g. Enkagrid TRC 30)
- Multifunctional biaxial geogrid composite of high-modulus low-elongation Twaron®
aramid fibers embedded in a Colback® polyester nonwoven: reinforces, separates
and filters
- Suitable for use in construction haul roads, parking areas or airport runways
- Outstanding stress-strain ratio to meet the most demanding requirements
- Allows thinner sub-base layers, extends structure life considerably
|
|
|
TenCate Miragrid GX is a geogrid, made from high tenacity polyester, and has a polymeric coating. GX is charcaterized by high strength at low elongation and excellent friction properties opposite coarse-grained soil. It is therefore mainly used for the reinforcement of non cohesive soild. It is used in subgrade stabilisation and th econstruction of roads and railways, for slope reinforcement in landfills and for retaining structures, including those with facings made from prefabricated concrete blocks.
|
|
The Tensar Mat range controls soil erosion.
The Mat is designed to initially stabilise the surface whilst assisting vegetation to establish. It then goes on to provide long-term, tenacious reinforcement of the root system.
Reinforced grass slopes have been shown to have an erosion resistance able to withstand current velocities in excess of 4m/sec.
|
|
|
|
|
|
Enkadrain Premium drainage mats are high performance geocomposites with an outstanding drainage capacity, both on low gradients and under extreme loads.
When used at great depths or in special applications, products from the Enkadrain Premium range show what they can do. Enkadrain Premium has a drainage capacity easily meeting the DIN 4095 standards (Germany, drainage for protecting structures). And, of course, all Enkadrain Premium products also meet requirements as a protective layer to waterproofing membranes according to DIN 18195 (Germany). In addition to its outstanding drainage capacity, the three-dimensional core of looped polyamide monofilaments provides sound insulation properties. Enkadrain Premium products absorb vibration from nearby sources of noise, such as surface and underground railways, reducing noise transmission levels significantly.
Which is the right Enkadrain product for your project depends mainly on construction depth. Drainage mats from the Enkadrain Premium product range are the ideal solution for draining buildings with multiple basement levels. Their technical design and resulting high performance makes them suitable for deep structures which have to be drained: Enkadrain ST and Enkadrain TP in particular are best suited to deep basement applications.
Enkadrain Premium can also be used in cut and cover tunnels, for example, to drain off inflowing water and protect the waterproof sealant. Enkadrain TP was used for vertical drainage on bridge abutments on both the new German Cologne/Rhine-Main and Munich-Ingolstadt high-speed railway lines and uncountable projects of this kind worldwide.
Like all Enkadrain products, Enkadrain Premium's unique looped core structure makes it flexible and easily adapted to even the most complex geometries, for fast, cost-effective installation with a minimum of cutting to shape.
Enkadrain Premium has also proved itself in horizontal drainage for years. Under extensive and intensive green roof areas, Enkadrain 20H and Enkadrain ST can be relied on to drain off excess water safely. Other Enkadrain Premium products are designed to provide drainage underneath parking plaza decks and cobbled pavements.
Where surfaces are to be used by traffic, Enkadrain TP often is the ideal solution to provide pressure-resistant drainage paths.
|
|
PLANTCOTEX ® RACINE can be used at the time of planting or later.
Plantcotex ® Racine is a vertical barrier that definitively eliminates the deformation of road surfaces and pavements and problems caused by the invasion of water, drainage or telephone networks by roots.
A trench is dug all round the plant, the root barrier is inserted vertically and the trench is then filled in again, keeping Plantcotex ® Racine in its vertical position.
Damage by roots is permanently eliminated.
|
|
|
|
|
|
Enkadrain Premium drainage mats are high performance geocomposites with an outstanding drainage capacity, both on low gradients and under extreme loads.
When used at great depths or in special applications, products from the Enkadrain Premium range show what they can do. Enkadrain Premium has a drainage capacity easily meeting the DIN 4095 standards (Germany, drainage for protecting structures). And, of course, all Enkadrain Premium products also meet requirements as a protective layer to waterproofing membranes according to DIN 18195 (Germany). In addition to its outstanding drainage capacity, the three-dimensional core of looped polyamide monofilaments provides sound insulation properties. Enkadrain Premium products absorb vibration from nearby sources of noise, such as surface and underground railways, reducing noise transmission levels significantly.
Which is the right Enkadrain product for your project depends mainly on construction depth. Drainage mats from the Enkadrain Premium product range are the ideal solution for draining buildings with multiple basement levels. Their technical design and resulting high performance makes them suitable for deep structures which have to be drained: Enkadrain ST and Enkadrain TP in particular are best suited to deep basement applications.
Enkadrain Premium can also be used in cut and cover tunnels, for example, to drain off inflowing water and protect the waterproof sealant. Enkadrain TP was used for vertical drainage on bridge abutments on both the new German Cologne/Rhine-Main and Munich-Ingolstadt high-speed railway lines and uncountable projects of this kind worldwide.
Like all Enkadrain products, Enkadrain Premium's unique looped core structure makes it flexible and easily adapted to even the most complex geometries, for fast, cost-effective installation with a minimum of cutting to shape.
Enkadrain Premium has also proved itself in horizontal drainage for years. Under extensive and intensive green roof areas, Enkadrain 20H and Enkadrain ST can be relied on to drain off excess water safely. Other Enkadrain Premium products are designed to provide drainage underneath parking plaza decks and cobbled pavements.
Where surfaces are to be used by traffic, Enkadrain TP often is the ideal solution to provide pressure-resistant drainage paths.
|
|
|
|
|
|
Professional builders agree Enkadrain Standard is the solution when it comes to fast, cost-effective drainage and structural protection. Lanes cut from the handy 1 m wide rolls are easy to nail or glue to walls. Enkadrain is highly effective and reliable.
With little cutting to size required, this drainage mat is a powerful '3 in 1' solution for drainage, filtration and protection of structures.
One of Enkadrain Standard's main applications is the use in front of cellar walls and basements that are to be protected from water and moisture penetration. Enkadrain has proven itself as a quick to install, effective product in thousands of projects worldwide. As well as its outstanding drainage capacity, Enkadrain provides reliable protection for any waterproofing that has been applied. Advice on selecting the correct Enkadrain from the product range may be requested from your supplier.
Lanes of Enkadrain Standard product types can be applied both horizontally and vertically, making it very easy to integrate in the construction sequence.
Enkadrain Standard products can also be used in horizontal drainage: choice of type dependent on the project requirements in terms of compression strength and water runoff volume as a function of slope and filter stability. For example, if the roof is used by vehicles, Enkadrain S5004C/2-2s/T110PP will provide the necessary compression resistance.
|
|
Our reusable Floorliner®-Family protects floors against mechanical damage and stains from liquid spills -and at the same time, it helps to prevent accidents. More benefits: Floorliner® is environment-friendly, non-toxic and suitable for thermal disposal.
Floorliner®: The multifunctional protective nonwoven covering with the Opticoat® adhesive coating by Landolt. Safe and highly effective protection to cover floors of every type, carpets, tiles and furniture, etc.
|
|
|
|
|
|
Enkadrain CK is a multi-functional mat designed for use as both drainage layer and lost shuttering between rock surfaces, bentonite walls, existing structures and new structure walls.
The Enkadrain CK product range comprises a number of different product types whose cavity-rich core is attached to a nonwoven filter on one side and a concrete or shotcrete tight PVC layer preventing cement slurry entering the core. Both, the PVC layer and the nonwoven filter extend 10 cm to one side of the core in opposite direction. This ensures that the joint is covered when lanes of Enkadrain CK are laid adjacent to one another.
Enkadrain CK can be used for drainage at great depths. These products are so flexible they can be adapted to the most complex geometries. Using Enkadrain CK means you can apply concrete direct without any loss of space. In many cases, it serves as lost shuttering, replacing one shuttering.
All Enkadrain CK products are quick and easy to use, and can be attached to the sheeting using construction adhesive or PVC discs nailed to the rock. Enkadrain CK is elastic, which means it can also be used as a flexible separation layer between adjacent buildings, reducing soil-borne noise and vibration considerably and acting as a load separator. This can be particularly useful in railway construction projects.
The products' drainage capacity, flexibility and filter performance are such that when used horizontally, Enkadrain CK acts as a water relief and anti-capillary layer between sub-grade and base slab. In smaller projects where the demands on drainage capacity and the membrane seal are less important, Enkadrain CKL 10L can serve as the ideal alternative to Enkadrain CK.
Tailor-made Enkadrain CK product types are available for special applications such as in tunneling.
|
|
|
GEOSAND allows a particulate material, such as sand, to be contained within a geosynthetic structure thereby providing means for installing a consistent layer thickness over an undulating surface much easier. By ensuring that a known quantity of particulate material, such as sand, is installed per unit area of track-bed this allows a much thinner layer of sand to be applied than conventional methods, thereby reducing material costs. Further, a containment structure of this type also allows the particulate material to be positioned and installed in a much quicker and efficient manner than installation methods associated with the prior art.
|
|
Terram B1 consists of a drainage net with a filter geotextile which forms a cost effective drainage layer as an alternative to granular materials.
Terram 1B1 (formerly Filtram 1B1) consists of a drainage net with a filter geotextile on both sides which forms a cost effective drainage layer as an alternative to granular materials. When used in conjuction with a waterproofing system, Terram 1B1 provides drainage and provides protection against damage to the waterproofing.
Terram 1BZ combines an impermeable membrane, drainage net and filter geotextile which together form a drainage layer with added waterproofing function. Terram 1BZ may be used to compliment a proprietary tanking system.
Terram composites are manufactured using polyethylene and polypropylene which both offer high resistance to chemical and bacterial degradation. Terram's composites are bonded using heat lamination.
|
|
Polyester non-wooven Geotextile, with excellent mechanical properties.
Applications:
Reinforcing fabric for use in combination with the MARISEAL® 250 liquid-applied waterproofing membranes. Applied on entire surface to be waterproofed or locally on wall-floor connections, inside movement joints, over cracks and around pipes outlets and chimney stacks, etc.
|
|
|
Terram heat-bonded nonwoven geotextiles e.g. Terram 1000 to Terram 4000 combine the hydraulic and mechanical properties required for effective separation and filtration within a revetment structure. Terram nonwoven geotextiles are applicable where the efficient protection of fine to medium soils is required.
|
|
|
|
|
|
Percolation Bloc
The flexible, high-performance percolation bloc is ideal for use in public and industrial areas - a version you can inspect. Information
Technical details
accessory
Specially developed percolation shaft for stormwater management or rainwater harvesting, for controlled draining of rainwater into the groundwater.
The unique inspect rim facilitate flexible laying of inspection channels within your percolation bloc ditches.
It is already completely prefitted and only has to be installed in the tried and tested percolation block system.
The percolation blocs can be inspected easily with a push-rod camera through the opening of diameter DN 150.
Lorry-bearing with 50 - 80 cm of earth covering
Percolation bloc 300 lorry-bearing:
Lorry-bearing with 50 - 80 cm of earth covering
Easy to inspect with a push-rod camera
Percolation system for extensive percolation of rainwater
Retention system to relieve public sewer networks
Replaces conventional drainage pipe with gravel packing
Saves rain tax
300L black [order no. 360010]calculated sizeadd to notepad
Anzahl length width height
1 1200 mm 600 mm 420 mm
Absetzfilterschacht, begehbar
[order no. 340026]Absetzfilterschacht, PKW-befahrbar
[order no. 340027]Sicker-Filterschacht, PKW-befahrbar
[order no. 340025]Universal-Filter 3 Extern, begehbar
[order no. 340020]Universal-Filter 3 Extern, PKW-befahrbar
[order no. 340021]Universal-Gewerbe-Filter 3 Extern, begehbar
[order no. 340050]Universal-Gewerbe-Filter 3 Extern, PKW-befahrbar
[order no. 340051]Graf-Tex geotextile size 2.50 x 2.50 m
for a Rain Bloc
[order no. 369010]Graf-Tex geotextile
Material sold by the metre, roll width 5 m
[order no. 369014]Deaeration end DN 100
[order no. 202004]connecting elements
for all horizontal and vertical connections 10 units
[order no. 369012]Sedimentation filter shaft suitable for pedestrian loading and vehicle loading
[order no. 340026/340027]
Infi ltration fi lter shaft, vehicle loading
[order no. 340025]
Universal Filter 3 external suitable for pedestrian loading and vehicle loading
[order no. 340020/340021]
Universal Industrial Filter 3 external suitable for pedestrian loading and vehicle loading
[order no. 340050/340051]
|
|
EAN 5011479147894
Catalog code 6LB100
Product number 2 26066100
Product Type Stormwater modules
Main Dimension 150 mm
Main Material Polypropylene
Colour Blue
Weight 9 kg
Pack Qty 15 Pcs
Packaging 1 piece
Min Qty 1 Pcs
Lead Time Within 10 - 15 days
|
|
Space-saving and good value. Specifically designed for use in private and rural areas. Information
Technical details
accessory
The system, consisting of one or more tunnel modules and two end plates, can be expanded as necessary
It is laid on one level.
The lightweight is very easy to lay at only 15 kg.
In order to facilitate free design of the surface above, the system can be permanently loaded with approx. 3.5 t per m2 and, thus, is suitable for vehicle loading.
Specifically designed for use in private and rural areas
Percolation system for extensive percolation of rainwater
Retention system to relieve public sewer networks
Replaces conventional drainage pipe with gravel packing
Saves rain tax
|
|
Tensar SS geogrids
Tensar SS geogrids are used for the reinforcement of soils and aggregates in construction of structures such as road pavements, working platforms and reinforced foundations.
Tensar SS geogrids are stiff monolithic geogrids with integral junctions. They are orientated in two directions such that the resulting ribs have a high degree of molecular orientation which continues through the area of the integral node. The ribs have a rectangular cross section with square edges.
|
|
MacGrid® WG series of woven geogrids are predominantly used in Mechanically Stabilized Earth (MSE) and Reinforced Soil Slope (RSS) structures of virtually any height, and for stabilizing and reinforcing subgrades. They have a polyester core encased in a tough PVC sheathing. The sheathing and dimensions of the polyester MacGrids® mean that almost any type of backfill can be used, from large granular fill to more cohesive materials.
MacGrid® reinforced soil slopes are generally designed to vegetate, therefore a wedge of topsoil is placed behind the face of the reinforced slope. A bio-degradable blanket is installed preventing the topsoil and fill from spilling out between the apertures in the grid, and accelerates the vegetation of the slope.
MacGrid® WG has also been tested to be used with most of the Segmental Block Manufacturers like block Lock+Load, Keystone, Rockwood, Anchor and Versa-lok.
|
|
|
|
|
|
SIDRA drain (Patent no. PC2005A000015) has been designed with the purpose to install in the ground self-drilling draining steel pipes without the aid of casings that are commonly used to carry out drilling holes in loose grounds, in order to install the common PVC draining pipes.
During the years, SIDRA drain was subject to substantial evolutions and technical improvements until the one currently on the market that is mainly constituted of:
1. High quality steel pipe characterised by the presence of draining holes of about 16 mm in diameter, protected by special “micro-filtering valves”.
2. Metal and/or plastic micro-filtering valves.
3. Protection of micro-filtering valves during the perforation phase, by filling them with a water soluble and biodegradable plastic material.
4. Eventual sacrifical bit with non return valve (if installed with rotary technique).
5. Eventual preventer, in case of drilling below the water table.
SIDRA drains can be supplied in elements of variable length, according to the specific needs of the job site.
The technical evolution of the product brought to consider the SIDRA draining pipe during the drilling phase, as a common drill rod because the “micro-filtering valves”, protected with water soluble plastic material, are effectively locked into the same pipe. This allows the drilling fluids to flow to the sacrificial bit (with pressures up to 15 Bar) without any need for a specific co-axial piping.
|
|
|
BIRCOlight - especially in areas such as pedestrian precincts, squares and drives, this channel system with its variety of gratings provides scope for challenging architectural designs. Despite its low weight it has a load-bearing capacity of up to class E 600
|
|
|
|
Ground stablilisation and drainage
