|
|
- 100 % water yield
- Smooth installation depth from 570-1,050 mm using telescopic dome shaft
- Suitable for pedestrian loading with plastic cover/suitable for vehicle loading with cast cover
- Cover has child proof closure
- Low height offset (270 mm) between inlet and outlet
- Maximum 350 m² surface to be sealed with connection to DN 100 and 50 m² with DN 150
- DN 100 and DN 150 connections
- Sieve insert mesh width 0,35 mm
|
|
-Filter specially developed for rain water harvesting
- Patented filter technology
- Low maintenance as self cleaning
- TÜV safety-tested
- Space saving filter technology integrated in the tank
- Filter housing can be removed without tools to inspect tank
- Transparent cover for easy maintenance
- DN 100 connections
- Can be fitted with Opticlean cleaning unit
- Only 165 mm heigt offset between inlet and outlet
- Optimum cleaning performance without maximum water yield
- Provides over 95 % water yield
|
|
Optimum cleaning performance with maximum water yield!
- Filter specially developed for rain water harvesting
- Patented filter technology
- Low maintenance as self cleaning
- TÜV safety-tested
- Space saving filter technology integrated in the tank
- Filter housing can be removed without tools to inspect tank
- Transparent cover for easy maintenance
- DN 100 connections
- Can be fitted with Opticlean cleaning unit
- Only 165 mm heigt offset between inlet and outlet
- Optimum cleaning performance without maximum water yield
- Provides over 95 % water yield
|
|
For filter and supply of rainwater to single and dual family homes with roof surface areas up to 300 square meters.
Filter with 200 micrometer mesh - easily removed and cleaned - high efficiency.
Backwash for filter with ¾ inch pressure connection to rainwater supply piping. Backwash can be installed at a later date if desired.
|
|
Tanks of retention Carat (from 2700 to 13000 L)
For retention 100%
Tanks of retention to controlled flow
These tanks are especially recommended when:
- the basins of storm are saturated,
- the networks are overloaded,
- the infiltration of the grounds is too slow,
- the ground water is not very deep.
They are more and more often forced by the lotisseurs in order to limit the rain water rejections in the natural environment. The holding capacity (from 2.700 to 13.000 liters) and the controlled flow of drainage (of 0,05 L/s with 2 L/s) are mentioned on the schedule of conditions of the lotissor in the paragraph "cleansing".
|
|
Tanks of retention Carat More (from 4800 to 13000 L)
To combine retention and use
These tanks have a double mission:
- to retain rain water in its retention part and to evacuate it towards the network according to a controlled flow.
- to preserve a volume of rain water for a personal use garden and habitat.
Advantages
- Equipment to measure according to volumes of desired retention and use.
- Possible volumetric Governor of 0,05 L/s with 2 L/s.
- Implementation facilitated thanks to a weak weight and an obstruction.
- Many essential accessories available (spillplates, filters, etc...).
- Many capacities suggested (4 800 to 13.000 L).
|
|
The Herkules tank with the incomparable price-performance ratio for overground and underground installation. Groundwater-stable!
- For underground fitting (with support pipe)
- TÜV safety-tested
- Awarded product of the year by the German Trade Association for Plastics Processing (FKVV)
- Patented fast connection (assembly is effected without screws)
- Long life due to solid profile packing (lifetime proven over 25 years in laboratory tests)
- Can be extended as required. Volumes of several 1,000 l are possible using preformed connections and connection points
- Easy to transport due to low weight and practical size
|
|
- Strong walls, impact-resistant and weather-proof
- Can be extended as required
- With 2 galvanised steel bands
- Preformed connections facilitate easy connection to the inlet and outlet.
- Space-saving design
|
|
* For overground installation
* Long life, UV-stable
* Dark colouring prevents algae formation
* Large access facilitates easy cleaning
* Smooth inner tank surfaces for easy cleaning and best water quality
* With mounts for connection pipes
* The container must be emptied when there is a danger of frost
* Material polyethylene ( PE ) up to 100 % recyclable
|
|
* For overground installation
* Long life, UV-stable
* Dark colouring prevents algae formation
* Large access facilitates easy cleaning
* Smooth inner tank surfaces for easy cleaning and best water quality
* With mounts for connection bores
* The container must be emptied when there is a danger of frost
* Material polyethylene ( PE ) up to 100 % recyclable
|
|
The garden tank. The space saver for rainwater collection.
- For collecting rainwater in the garden or the cellar
- Can be extended as required
- Convenient cleaning is possible
- Child-proof cover
- Transparent hose serves as a level indicator
|
|
The rainwater amphora. Stylish and attractive rainwater collectors.
- Rainwater collector mediterranean style
- High storgae volume with small footprint
- Simple fitting of the drain tap ( accessory ) using moulded screw necks
- Fixing eyelets for storm protection included.
- Inlet seal DN 50 included.
|
|
The elegant overground alternative.
- High storage volume with small footprint
- Elegant rainwater collector - extremely stable
- Fixing eyelets for storm protection and inlet seal DN 50 included
- Simple water extraction using the drain tap or the transparent hose (accessory)
- Moulded screw necks - no drill necessary
|
|
Balmoral rainwater harvesting systems reduce the demand for mains water provision. A Balmoral rainwater harvesting system can help save up to 50% of your metered water costs.
Home-Harvest
The Balmoral Home-Harvest system heralds a new level of quality and performance in domestic rainwater harvesting.
Designed for easy installation and reliable operation, each system provides the highest quality non-potable rainwater for toilet flushing, washing machines, garden irrigation and vehicle washing purposes.
Garden-Harvest
Balmoral's Garden-Harvester is the complete rainwater system for garden irrigation use.
An easy to install, high performance and economic solution for the keen gardener providing free water, even during hosepipe bans, all year round.
-Home-harvest and Garden-harvest model options
-Environmentally responsible
-Leak proof
-Low maintenance
-Lightweight and simple to install
-Corrosion resistant
|
|
Some convincing reasons:
- Growing costs of the drinking water production
- Limited quantity of the sources of the good drinking water - rain water is favourable for:
- Washing = detergent savings,
- Pouring = garden, house plants,
- Toilets = conclusion with the boiler scale
|
|
|
Boralit underground rainwater tanks are constructed in that way as to recycle rainwater as efficiently as possible. Rainwater can be reused to water plants, wash cars, feed the toilet reservoirs, If an additional filter system is installed, rainwater can be used for even more household tasks. Because rainwater is a present from nature to be cherished. When a rainwater tank becomes empty, Boralit can even offer an automatic system which makes sure the rainwater tank is supplied with mains water in order to make sure there is always a water reserve available
|
|
Innovating product, this kit of manufacture 100% Frenchwoman is adapted perfectly for reduced sites, difficult of access or basement.
Very fast and easy of assembly (without nail nor screw) it will be delivered
directly on pallet. Its compactness and its featherweight make of it an ideal product for the rainwater recovery.
|
|
|
|
|
|
Kits Habitat Professional Carat (from 3750 to 13.000 L)
For an habitat use and garden
to bury - passage pedestrians
- Technical solution
- System of filtration patented integrated into the tank
- Simple and fast Assembly of all the accessories
- Optimized Management of the station by microprocessor
- Digital Posting of the percentage of water available in the tank
- Integrated self-cleaning Filter
- Only one apparent lid on the surface
The kit is composed of:
1-tank to bury Carat
2-maximum adjustable telescopic spillplate. Total height with dome: 750 to 1050 mm
3-Pack additional N° 3 including/understanding:
- 1 filter Optimax complete internal Pro
- 1 pipe anti movement with shoe
- 1 siphon of too full with function stop rats
- 1 cuff of fixing
- 2 sleeves DNN 100 - L. 150/250 mm
Technical 4-kit Professional Habitat Aqua-Center-Silentio including/understanding:
- 1 Aqua-Center-Silentio enclosure (with tube and Opticlean® electromagnetic sluice gate without pipe)
- 1 set of pulling with strainer and float
- 1 microphone-filter
- 1 master key wall DNN 150
- 1 set of marking (non-drinking water)
- 12 m of pipe pressure 6 bars 1 "
|
|
Kits Garden Carat Comfort (from 2700 to 13.000 L)
For a garden use - submerged pump
Stainless integrated - to bury - passage pedestrians
- Technical solution
- Easy to use
- Setting in step and automatic stop of the pump with security misses water
- Only one apparent lid on the surface
- Simple and fast Assembly of all the accessories
The kit is composed of:
1-tank to bury Carat
2-minis raise telescopic adjustable. Total height with dome: 750 to 950 mm
3-Pack additional N° 2 including/understanding:
- 1 Universal filter 3 intern
- 1 pipe anti movement with shoe
- 1 siphon of too full
- 1 stop rats (grill anti-vermin)
- 1 cuff of fixing
- 2 sleeves DN100 - L.150/250 mm
Technical 4-kit Garden - Comfort including/understanding:
- 1 electric pump Integrated stainless with kit of automation integrated
- 1 set of pulling with strainer and float
- 1 glance of connection
- 1 pipe of pulling pressure 10 m
|
|
The Rondus telescope manhole pits close the system to the upper edge of the land. For an optimum adjustment to the conditions, on-site, the height continuously adjustable, also , the unit can be tilted by 5° - they seal the entire system - with two lip seals up to the upper edge of the land.
- Can be installed in ground water and stratum water, as well as cohesive ground surfaces (i.e., loam).
- In general, can be installed in a frost-free area through a tank manhole pit (500 mm).
- Continuously adjustable installation depth through a telescope manhole pit!
- Trouble-free assembly due to slight excavation.
- Long life, 15-year warranty
- Low tank weight means can be installed without crane
- Large access (> 600 mm) for easy inspection of the tank
- Tanks made from 100 % recyclable polyethylene
- Best water hygiene due to smooth inner tank surfaces and use of food-safe materials
|
|
Resisting to 35°C, plastic, external lining bituminous (DlN 6607). Inspection pit DNN 600 with drillings of connection (2 X Ø 160 mm, 1 X Ø 42 mm). Feed pipe DNN 150 with tube plunging and elbow pipes anti-movement. Pipe of overflow DNN 150 with siphon.
Advantages:
- Possibility of circulating on the tanks according to the resistance of the ground.
- Requires much less work than the installation of a tank concrete, while remaining tight in time.
- Interior Surface smoothes covered with a plastic coating.
- Long life of life.
- Many references, important unit capacities.
Especially studied for:
- Local government agencies,
- Companies,
- Schools,
- Collective Dwellings,
- Cleansing,
- Protector sets fire to.
Accessories
- Spillplate and protector passage pedestrians or vehicles on request.
- Passage trucks up to 40 tons on request.
Capacities
From 13.000 to 100.000 liters, on request.
|
|
|
|
|
|
The Carat tank consists of two half shells which can be stacked on top of each other, allowing multiple tanks to be stacked on a single pallet for shipping. For example, it is possible to stack five 6,500 ltr Carat tanks, or nine 2,700 ltr Carat tanks on a single pallet. This allows a standard 40 ft. shipping container to house a total tank volume of up to 130,000 ltrs! The tanks unique stacking feature directly reduces transport costs and environmental impact from vehicle emissions, whilst allowing shipments to any destination in the world.
Easy and safe assembly
- The patented quick connection (illustrated in green), allows the Carat tank to be assembled without screws in only few minutes. Disassembly is possible at any time.
- The first-class EPDM material used in the profile sealings (illustrated in yellow), has been laboratory tested to last more than 25 years.
-The centering bolt (illustrated in orange) assures the accurate and easy assembly of the two half shells preventing any leaks
|
|
The RainTrap is:
- Easy to install
- Inexpensive
- Simple on/off operation
- Suitable for existing and new homes
- Automatic rainwater diversion when tank reaches full capacity
- 2800, 3800 and 4600 litre capacities
- Internal self-cleaning leaf filter
- Designed and manufactured in the UK
RainTrap is the new, inexpensive underground rainwater storage and delivery system from the market leaders in rainwater harvesting.
The RainTrap will collect rainwater from the roof via the existing guttering and downpipe system on the property. The integral leaf filter will remove unwanted debris washed down from the roof thus ensuring good quality stored water.
A simple on/off switch will operate the integral pump, allowing Raintrap to deliver the stored water under pressure to where it is needed.
The system can be used all year round to water the garden, operate a sprinkler or wash the car.
|
|
|
|
|
|
The Carat tank consists of two half shells which can be stacked on top of each other, allowing multiple tanks to be stacked on a single pallet for shipping. For example, it is possible to stack five 6,500 ltr Carat tanks, or nine 2,700 ltr Carat tanks on a single pallet. This allows a standard 40 ft. shipping container to house a total tank volume of up to 130,000 ltrs! The tanks unique stacking feature directly reduces transport costs and environmental impact from vehicle emissions, whilst allowing shipments to any destination in the world.
Easy and safe assembly
- The patented quick connection (illustrated in green), allows the Carat tank to be assembled without screws in only few minutes. Disassembly is possible at any time.
- The first-class EPDM material used in the profile sealings (illustrated in yellow), has been laboratory tested to last more than 25 years.
- The centering bolt (illustrated in orange) assures the accurate and easy assembly of the two half shells preventing any leaks
|
|
The Rondus underground tank – the flat all-rounder. It was specially developed for rainwater harvesting and is suitable for installation in groundwater.
Flat design
The flat design of the Rondus enables an amazingly low installation depth - which means a lesser degree of excavation (at the same time, expense and effort) than for a classic rainwater-based system – in fact, excavation is reduced by approx. 40%. Even so, all components which carry water are at least 60 cm below ground – in the frost-free level.
Ground-water-stable
The Rondus underground tank is – due to its specifically engineered design – so stable that can be completely installed in ground water and stratum water, as well as cohesive ground surfaces (i.e., loam – in connection with buoyancy control). The maximum ground-water level corresponds to the upper edge of the land.
|
|
Polyethylene storage tank for underground installation
Child safe cover
Multiple connections for inlets and outlets up to DN 150 possible for inlets and ventilation pipes.
Cast iron cover is vertically adjustable, tiltable (up to 5 degrees) and rotatable to match on-site surface requirements. Available in load class A/B or D. DN 100 inlets with inlet flow calming device. DN 100 outlet for overflow.
Storage capacities - 3000, 4500 and 6000 liter.
|
|
Polyethylene storage tank for underground installation in pedestrian only areas (up to 300 kg)
Child safe cover.
Multiple connections for inlets and outlets up to DN 150 possible.
Storage capacities - 3000, 4500 and 6000 liter.
|
|
Polyethylene storage tank for underground installation.
Child safe cover.
Multiple connections for inlets and outlets up to DN 150 possible.
Upgradable to load class B (12.5 ton) with KESSEL upper section and cast iron manhole cover (according to EN 124). Class B chamber can be installed in parking areas / driveways.
Storage capacities - 3000, 4500 and 6000 liter
|
|
| ... products without information |
| |
|
|
Rainwater tanks
