|
|
Kalzip SolarClad
Kalzip SolarClad is a non-integrated alternative that provides a retro-fit solution for installations on existing structures or new new-build developments.
The photovoltaic (PV) laminates consist of extremely robust amorphous silicon thin-film modules attached to aluminium carrier panels, to ensure high quality and fast installation. The panels can be installed on any Kalzip standing seam system without penetrating the roof and can also be conventionally mounted on other system elements, such as trapezoidal sheets.
The lightweight units are suitable for most roof shapes, giving architects and engineers maximum design freedom.
|
|
|
System PC is ideal for new roofings and substitution asbestos/eternit. It is constituted from flexible rolled steels UNI-SOLAR® glue from SUNERG on a composed corrugated sheet from two hardwares, over in aluzink and under in steel galvanized prepainted or aluminum (in glass resin for zootecnici plants) with coibentazione in poliuretanica, such foam to guarantee a perfect thermal insulation.
|
|
Wherever you want - Off-grid solutions
If there is no stable and cost-efficient connection to the electricity grid, stand-alone photovoltaic systems are often the only viable alternative. That is why SCHOTT Solar offers several modules which cater especially to grid-independent electricity generation. These are the modules based on innovative ASI® thin film technology: ASI-F 2/12, ASI-F 5/12, ASI-F 10/12 and the ASI-F 32/12.Our 20-year performance guarantee is also valid for these modules. Whatever the future holds.
|
|
Sharp’s thin film product pairs amorphous silicon with a layer of microcrystalline silicon to achieve high stability and performance. Produced with less than one percent of the silicon used in crystalline solar cells, thin film products offer high performance with less semiconductor material. With a low temperature coefficient for output power, thin film generates greater energy than its crystalline silicon counterpart in geographic regions where temperatures are high. In warm climates, this translates into more kilowatthours per kilowatt. Certified to IEC 61646, these modules are not UL-listed and are exclusively for
behind-the-fence applications.
|
|
|
The new solar Pb-gel batteries supplied by Helios Technology are maintenance free. They are particularly suitable for photovoltaic system because they can operate and function in any positions. Furthermore they have wide temperature range response and a very low self discharge, guaranteeing an high amperometric inside yeald. In particular, the new HL Series Pb-gel batteries supplied by Helios Technology have a standard average life-time of 8-10 years and they are particularly adaptable to cyclical discharging. These batteries are ideal for the use in airtight environments and underground housings.
|
|
|
|
|
|
The batteries monoblock of series N.TH have been planned in order to equip fotovoltaici systems, utlizzando the same criteria used for the realization of the storage cells for traction of high power.
The batteries monoblock of series N.TH are of the type lead/acid to free electrolyte and are realized or with flat positive slabs that with tubular positive slabs.
Main characteristics:
- storage in translucent plastic
- termosaldato cover in order to guarantee the held maximum
- weldings intercella adapted to high cues and long duration
- microporosi separators to elevated porosity and power insulation
- easy maintenance and recharges
Advantages with P.P.P. (Flat Positive Slabs)
- reliability
- flexibility in the applications
- economization and happiness of installation (finish them with conical pole)
Advantages with P.P.T. (Tubular Positive Slabs)
- reliability
- flexibility in the applications
- economization and happiness of installation (finish them with conical pole)
- elevated resistance to the cycles
- adaptability to an onerous use
|
|
|
|
|
|
My Geothermics with selected to pose the products
Wagner & Co one of the leaders of solar in Germany:
An innovative company with an important know-how and an experiment of more than 25 years.
Manufacturing solar installations with an offer produces very broad compact unit for individual housing to the collective installations, solar roofings and frontages.
Distribution by the means of My Geothermics and a network of professional fitters specialized in Germany and more than 10 European countries.
They Propose:
Solar installations for preparation of domestic hot water and supplement heating
Kits optimized for houses with one or two residences
Collective solar installations and heating networks solar
Complete solar roofings (Solar-roof)
Solar frontages
Photovoltaic solar installations for exploitation connected to the network or exploitation in isolated site
Complete and detailed technical informations in format paper or numerical.
At My Geothermics a Photovoltaic Service special with an Interlocutor file,
Mr. Cotelle Reachable Frederic to the 06-86-08-73-41 or frederic.cotelle08@orange.fr
|
|
The ALYPLANO panels are metallic panels with insulation made of rigid polyurethane foam fit for the realisation of Roofs Coverings of industrial building.
The ALYPLANO panels present good performance of FIRE RESISTANCE.
The ALYPLANO panels are constituted of two trapezoidal or microgrooved metallic supports with interposed insulation of rigid polyurethane foamo.
METAL SUPPORT:
The REPI FIRE panels are made of two trapezoidal, microgrooved or flat metallic supports obtained by cold-process profiling the sheet coils.
The materials which are used are:
- Galvanized Steel
- Prepainted Galvanized Steel
- Natural Aluminium
- Prepainted Aluminium
|
|
Characteristics
- Modules glass/glass from the design elegant
- Crystalline Cells enclosed between two glass plates
- The space between the cells concurs the passage dellaluce
- Semplicità and flexibility of installation
- Reduction of beams UV
- Reduction conditioned air consumption
- Respect of the international standards of quality
- Certification ISO 9001
|
|
Solar has never looked so good! Crystal clear Light Thru modules can be used to design striking canopies, atria, skylights, and vertical facades. Suntech Light Thru modules use crystalline cells sandwiched between 2 sheets of glass. The gaps between the cells allow light to pass through creating excellent shaded areas.
Suntech Light Thru modules dispel the myth that solar technologies are unattractive or difficult to design into a building. With the flexibility to specify the desired light levels passing through the glass, Suntech Light Thru is both a power generator and an aesthetic sunshade in one beautiful package.
|
|
Lets the sunshine in - Architectural solutions
In addition to generating energy, ASI® Glass modules for architecturale solutions provide several functions for modern solar architecture. Both opaque laminates (ASI OPAK™) and semitransparent laminates or double-glazing (ASI THRU™) meet the requirements of the building industry and can therefore be used with several traditional metal structure systems. Successfully used for more than 15 years, a comprehensive product range is available today: from standard formats to specific superstructures. Whatever the future holds.
|
|
|
KUBIK 500 is a DC-AC power inverter with a pure sine wave output designed for stand-alone applications, that is, for systems supplied by batteries, where the traditional 230VAC power grid is not available. KUBIK 500 is an inverter which converts a 12 or 24VDC input voltage supplied by the batteries, into a 230VAC - 50Hz output.
|
|
Condensing more than 25 years of R&D experience and know-how, and the milestone technology of a leading electrical and electronic manufacturer.
Photovoltaic inverters, from Mitsubishi Electric.
- Available only in Europe.
|
|
The PWI Series is Photowatt photovoltaic high efficiency indoor and outdoor inverters range. Easy to handle and secured for users thanks to its galvanic isolation and protection against over voltages.
This complete range up to 4.6KVA perfectly suits to all kind of applications, from residential applications to industrial%u2019s. Easy to install and operate, Photowatt%u2019s inverters offer two possible connections : screw terminals and MC connectors.
These inverters are optimized to maximize the yield of your installation thanks to 2 input voltage ranges:
- High Voltage (Hv) %u2013 dedicated to 5 inch cells modules
- Medium Voltage (Mv) %u2013 dedicated to 6 inch cells modules
|
|
|
The SunPower inverters 3000m and 4000m provide exceptional reliability combined with superior performance. Innovative design and advanced testing have been brought together to create a durable inverter that enables optimal system performance over the long term. Both models come with a standard 10-year warranty.
|
|
Designed by TENESOL for our standard generators, ENERGRID inverters are available with three nominal voltages: 1900W, 2200W and 2500W respectively for ENERGRID INVERTER 1900, ENERGRID INVERTER 2200 and ENERGRID INVERTER 2500.
These direct injection inverters convert the electric power coming from the modules into AC current adapted to the grid. Their technical features will ensure you optimal performances on all the available range of solar power.
The modularity of ENERGRID inverters allows having photovoltaic power stations of a few kilowatts to several hundred of kilowatts
|
|
|
Inverter with characteristics of vanguard, studied and realized in order to take advantage of the systems to energy alternative, like solar photovoltaic and the stabilized Aeolic at best. Available in 2 versions, with peaking powers 3-5-7 Kw, in a position to feeding cargos monophases and being connected to Trifasi bed frames. Selex 5 Plus works in grid-connected (transferring the energy alternated to in public electric bed frame) and stand-halo (with storage cells). Double operation automatism, with priority from the alternated source (bed frame or electricity-generating group) and aid with batteries. In manual use it can be chosen if to use the batteries, the bed frame, or the generator.
|
|
Modules Photovoltaic 170W 24 Volts
72 cells Silicon monocrystallin
16.5% of average output of cell
Tally anodic aluminum.
|
|
BP Solar is a pioneer of photovoltaic technology. With more than 35 years of experiment in the manufacture of "wafers" (sections), solar cells and modules, we optimized the lifespan and the electric performances of our solar generators. Our very last generation of products Série T to 72 cells is the result of our expertise in the design, the quality control, the manufacture and of our concern of the least detail
BP 4180T
Solar cells: 72 single-crystal silicon cells series-connected
Front face: Glass ARC 3,2 mm high transmissibility
Encapsulation: EVA
Back face: White polyester
Tally: Anodic aluminum money
Diodes: IntregraBus technology with three diodes Schottky (a diode protecting 24 cells)
Limp of junction: Bituminous mix (IP67): certified to pass the test of inflammability of standard UL1703. Dimensions: 40 X 101 x13 (mm)
Cables of exit: Cable certified 4mm2 Pg 1167 - 2007 with locking
Connectors MC 4
Dimensions: 1587 ±2 mm X 790±2 mm X 50 mm
Weight: 15,4 kg
|
|
The module is second constructed to norms IEC 61215 with quality materials heads in order to assure performances electrical workers without problems in the time.
They are constructed with 72 monocrystalline solar cells from 125x125 milimeter of equal power, connected in able series and to load batteries from 24V.
Every string of 36 cells has a by-pass diode valve.
The treatment of the surface of the cells with antiglare SiN on the frontal part gives a uniform dark blue color.
The cells are laminated between a glass to low iron content (3,2 milimeter) moderated and one sheet of tedlar between two sheets of EVA in order preventing prenetrazioni of humidity in the module.
|
|
Photovoltaic modules in monocrystalline silicon (with or without frame)
Unimetal modules are ideal for any type of photovoltaic application. . They can be used to power loads in direct current (DC) or - using an inverter - for alternating current loads (AC).
All Unimetal photovoltaic modules and cells are individually tested to ensure quality and yield.
Unimetal modules generate peak powers of 65 - 170 Wp and are recommended for all typical photovoltaic applications such as:
- generators for remote homes or villages
- equipment for boats or campers
- pumping and irrigation systems
- pumping and irrigation systems.
In the context of developing alternative and sustainable energy systems and to safeguard the environment, Unimetal modules are designed to ensure easy inclusion even in "grid-connected" systems.
|
|
Front: Tempered Glass
Cells: 60 monocrystalline solar cells 156 x 156 mm
Encapsulation: EVA
Backside: Tedlar foil
Frame: Anodized Aluminium
Junction box: IP 54, Multi-Contact® type PV-JB/ S2 N
Bypass diodes: No. 3 Diotech SB1240
Cable: Multi-Contact® 4
|
|
Front: Tempered Glass
Cells technology: Monocrystalline
Cells dimensions: 125 x 125 mm
Cells number: 32
Encapsulation: EVA
Rear back side: Tedlar foil
Frame: Anodized Aluminium
Junction Box: Helios JB S5
Bypass Diodes: 2 pcs
|
|
Front: Tempered Glass
Cells technology: Monocrystalline
Cells dimensions: 156 x 156 mm
Cells number: 32
Encapsulation: EVA
Rear back side: Tedlar foil
Frame: Anodized Aluminium
Junction Box: Helios JB S5
Bypass Diodes: 4 pcs
|
|
Front: Tempered Glass
Cells technology: Monocrystalline
Cells dimensions: 125 x 125 mm
Cells number: 36
Encapsulation: EVA
Rear back side: Tedlar foil
Frame: Anodized Aluminium
Junction Box: Helios JB S5
Bypass Diodes: 2 pcs
|
|
- 72 mono-crystalline cells series connected
- Peak power 180 Watt at STC
- High quality and reliablility, assembled with advanced encapsulation materails to meet safety and reliability standard
- Durable, weathering proof lamination with encapsulation materials and professional solar glass
- Manufactured in ISO 9001 certified factory
- Best option for grid connected applications
- Compliant with IEC 61215 and IEC 61730 Safety Class 2 standards
|
|
Jiawei's 130 watt monocrystalline module has multiple advantages. These solar modules are made with back-contact monocrystalline solar cells which are aesthetically pleasing in appearance. The cells have a unique structure,
different from conventional cells, they yield arverage conversion efficiencies up to 20%.
|
|
|
|
Photovoltaic roof panels
