|
|
Suitable for:
civil and industrial buldings and for old roof renewal
Technical features:
high load bearing
structural
insulated
length on demand (350 mm multiple)
|
|
|
TEK 28 is an innovative roofing element, realized by connection of a metal thin sheet with a coating of high density expanded polyurethane. Insulating coating, which goes along the corrugation in a symmetrical way, allows to have an insulated product, which can be at the same time integrated to Alubel 28 system, today’s most trusted and widely used roofing system.
|
|
Waterproof
The basic panel in the THERMOCHIP range is made of two waterproof chipboards joined to an insulating core made of extruded polystyrene foam.
THERMOCHIP THH offers the possibility of different configurations depending on the use assigned to the panel and the required features. It basically addresses the load and insulation values obtained through the variations in thickness of both the board and the core (see chart).
The THH sandwich panel admits all types of roofing material due to its outside face, and it accepts wallpaper, paint and other decorative treatments on the inside.
THERMOCHIP THH, has a universal application is the most economical alternative in the range.
|
|
With the essence and advantages of classic THERMOCHIP the main characteristics of the ALPHA version is that provides greater resistance in wider support distances. To do so, the panel is complemented with a perimeter box made of rafters.
Insulation is also a THERMOCHIP ALPHA that is especially notable. This is because it includes a system that adapts to the most restrictive requirements of the Technical Building Code (CTE). This is achieved thanks to the rock wool reinforced by a steam barrier placed inside the perimeter box.
THERMOCHIP ALPHA presents a wide range of finishes in both wood and other materials. Furthermore, on its outer face it offers the possibility of choosing from three different solutions, depending on the rear covering and the roof that allows it to adapt to each of them with the consequent economic savings.
THERMOCHIP ALPHA is a panel that is custom built for your project.
|
|
The roofing panel asytoit consists of elements 100% which can be recycled, it thus fulfills perfectly the requirements of the HQE.
The simplicity of its design ensures low costs to him while respecting the thermal regulation.
Like all range BEOPAN, this product is faithful to the principle of the 3en1 which characterizes our manufacture:
ceiling
insulation
support of cover
This new panel is carried out in the respect of the durable development.
|
|
Panel BEOSAND belongs to the family "SANDWICH".
One will retain of this panel the side performances with regard to the thermo isolation, the soundproofing and his facility of installation due to his weak weight.
|
|
|
This traditional roofing is suited for buildings with average and steep pitch roofs. There are a variety of alternative colours that can be used on the outer facings that enable them to melt more easily into the countryside and bring to mind the colour of slate roofs, tiles etc.... This system entirely meets the requirements of the 2005 Thermal Regulations.
|
|
|
The leading self-adhered membrane roofing underlayment offers premium leak protection for sloped roofs subject to the effects of ice dams or wind driven rain. The membrane is designed to be applied to the roof deck prior to the application of the finished roof coverings (shingles, tile, metal).
|
|
|
Lattonedil presents ISOCURVO, the curved panel for prefabricated buildings roofing, and curved roofing in general with various radius size options. It can be produced with an outer surface in various materials - steel, copper, aluminium - depending on the architectural scheme it is to fit into. The curved panel comes in a range of thicknesses and finishing colours. You can always count on Lattonedil to come up with the most innovative solution.
|
|
At last, a roof for livestock.
ISOFACTOR is an innovative roof designed to protect your investment.
The insulated roof solves all problems with the application of a glass reinforced support underneath, which gives roofing the following features:
-all types of corrosion eliminated
-no more rust
-washable
-long-term durability
Several million cows, pigs and sheep will thank you for their four-star lodgings.
ISOFACTOR consists of stiff pre-painted steel or aluminium supports and an insulation core in high-density expanded polyurethane, which is CFC-free and hence environmentally friendly.
The glass reinforced support may discolour.
|
|
|
At last. The insulating panel for roofing has become an important component in contemporary construction. From a designer's point of view a panel's essential features are primarily: solidity, heat insulation, installation economy and a good aesthetic appearance. ISOCOPRE, the result of advanced technology, combines all these values in a single feature: six ribs, one metre wide. It is not therefore by chance that this model is one of the most widely appreciated by operatives in the civil and industrial building construction sector. ISOCOPRE consists of rigid supports in pre-coated steel, aluminium or natural copper, that can feature a flexible lower part, and an insulating core made of high density CFC free expanded polyurethane, which is therefore environmentally friendly. The range of thicknesses and external supports available makes it possible to tackle multiple design needs.
|
|
|
The industrial building construction sector selects products that combine quality and economy. In order to meet these requirements, Lattonedil has created EUROCOPRE, the insulating panel with four ribs that can be used for both civil and industrial roofing and for the walls of industrial buildings. EUROCOPRE is available in the same range of thicknesses and supports as the Isocopre panel, which is a further confirmation of its versatility.
|
|
|
Energy saving is becoming increasingly important in the building construction sector. Therefore the sector's attention is turned towards construction products that incorporate several components with a high insulation power. ISOPAR is a specific flat panel for the construction of movable walls, prefabricated garages, refrigerating cells, exhibition stands, sliding doors, false ceilings and is an ideal component in designs where a sturdy, light, and insulating product is required. ISOPAR is available in the "slatted", "ridged", "embossed" and "smooth" versions and contributes to the design of a new clear, simple, and regular architecture.
|
|
The Metl-Span ThermalSafe® panel core is made from non-combustible structural mineral wool boards that are processed in the factory to maximize the core's compressive strength. The resulting panel has superior structural characteristics and span capability. Metl-Span has created this panel to achieve one and two hour fire resistive ratings.
The advanced mineral wool core also provides enhanced insulation values that significantly lower heating and cooling costs.
|
|
The panel is made up of a water-repellent board in the outside face, a nucleus of extruded polystyrene, and a high-quality fir board in the inside face. This panel allows to build roofs with the added value of a finish indoors of traditional wooden frieze.
The choice of different thickness measures for the insulating nucleus will achieve the respective insulating values required in each particular case.
|
|
Waterproof + iroko
The TIrH is a version of the THERMOCHIP panel that is especially conceived for building roofs to maximize indoor space as it enables the homeowner to enjoy a roof with a high decorative value.
It is the highest quality form of the THERMOCHIP sandwich panel range, and it is made up of a waterproof chipboard on the outside, extruded polystyrene core and a tongued and grooved iroko wood board on the inside, available in natural or varnished finish.
|
|
Waterproof + Phenolic
With the TFH THERMOCHIP, you get a panel with the highest benefits that arise from bringing together the high insulation values of the extruded polystyrene core with the excellent qualities; especially regarding the resistance to humidity of the phenolic boards that make up the sandwich's inside.
In accordance with the required use and the load and insulation values, the THERMOCHIP TFH offers the possibility of different configurations obtained through varying the thickness of the insulating core and other panel components.
|
|
The panel of roof which makes you like wood...
Belonging to the sandwich family this product
is characterized by under face wood (18mm)
of very beautiful quality which emphasizes
traditional frames for the houses.
Restoration roof of house or installation of roofs, framework and wood,
in all the cases WOOD TOUCH will allure you.
|
|
|
|
|
|
It is a panel which is structural; this means it incorporates the traditional rafters of the roof, which are screwed onto a board which serves as the ceiling and EPS insulation is inserted in the factory, which provides the thermal and acoustic performance.
THE BENEFITS OF THE PANEL
The DPX 32has an insulation which limits the transfer of heat by conduction, convection and radiation, it therefore has the lowest lambda value of any product of this type: lamda 32. This insulation is approved by ACERMI and complies with the new Thermal Regulations (RT2000/2005). As regards the ceiling, the elasified insulation provides a significant improvement in acoustic insulation for air-borne and road noise; it resolves in particular the problem of impact (rain, hail) Laboratory tests confirm the performance of DPX is largely superior to existing panels on the market.
The DPX32 incorporates an insulant which does not damage the environment; no gas is used thus preserving the ozone layer. In addition, it is 100% recyclable, which differs from many systems, which use more hazardous materials.
The DPX32 uses an insulant, which has a European fire classification of Class B. In all cases, the DPX32 roof panels conform to the “Guide to insulation for the interior of domestic dwellings with respect to the risks in case of fire”.
SIMPLIFIED APPLICATION
The DPX 32make installation simple, the joints between panels are fitted in the factory (the panels can be supplied without joints by request and the panels can be joined on site with Polyurethane foam). Self-adhesive strips are placed along the laths, which prevent noise transmission (see detail).
|
|
ELYCOP® is a sandwich pre-fabricated roofing system, insulating and self-bearing, precurved to a fixed radius of 3.30 m.
The modular elements create an opaque roof, diffused shed light interrupted by ELYPLAST® (C496) double-walled skylights.
ELYCOP® is used on pre-fabricated structures with alternating wing-shaped or Y beams, to create a light, dependable and functional roof.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Mineral fibers
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
- 3 Greek tightening
- wide range of surface finishes
- ideal for roofing
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Polyurethane foam inserted between the support, gives a perfect insulation between membership and the support.
Sheet steel with hot galvanizing second EURONORM 142-79. Phosphatizing treatment for better protection to oxidation. Painting consists of a layer of primer and a film of acrylic paint (or PVDF)on the surface outwardly a layer of primer act promote accession of polyurethane to the inner surface.
|
|
Expanded Polyurethane inserted inside the support, confers a perfect isolation and adherence within the support.
Sheet stainless steel AISI 304 or316. Treatment of inner surface with a special machining of promoting the adhesion of polyurethane.
|
|
|
|
Roof insulation panels
