|
|
ATLAS Beton S.A. produces panels of prestressed and armed concrete frontage.
ATLAS Beton S.A. ensures transport of its own products and, if necessary, by means of adapted trucks. Concrete satisfied all the environmental classes except for: EE4, ES3, ES4 and EA3.
PANELS OUT OF CONCRETE ARMS
Standard thickness: 12,14,15 and 20 cm
|
|
ATLAS Beton S.A. produces panels of prestressed and armed concrete frontage.
ATLAS Beton S.A. ensures transport of its own products and, if necessary, by means of adapted trucks. Concrete satisfied all the environmental classes except for: EE4, ES3, ES4 and EA3.
PRESTRESSED CONCRETE PANELS
Standard height: 1,20 m
Standard thickness: 12,14 and 15 cm
These panels are available out of smooth concrete and with apparent grain (set of colors limited).
|
|
Our range of double tee units is the most structurally efficient system available for long-span, higher-load flooring applications. It's easy to use, flexible to work with and offers major time savings.
Thanks to their 2.4m width, the units easily halve the erection times of other flooring systems. You'll find them straightforward and fast to fit, wherever you use them.
They don.t need to be installed by specialists either. And, because tradesmen can have early access to floors, they can start finishing work sooner - saving even more time on site.
|
|
|
With the Curtain Wall Panelling Division STERCHELE SpA has become a point of reference for innovative technology, offering finishings which range from marble grit to gravel and the classical smooth cement as well as technical solutions to solve multiple problems posed by modern prefabrication.
|
|
|
Concrete element walls are produced in the factory in Meiningen. There is a distinction between internal walls, double-layered sandwich walls and exterior skins for façades. The walls are normally manufactured at room height, the maximum height being approx 5,50 m, with normal wall thicknesses varying between 80 mm and 360 mm.
|
|
Nearly all construction problems in building and industrial construction can be surmounted extremely well using prefabricated individual elements and segments. The systems have been technically perfected and are particularly attractive in terms of price and performance - your construction budget will be noticeably relieved.
Heberger pre-engineered construction services can point to a number of reference construction projects underlining a further aspect: reinforced and prestressed, precast concrete component construction is quite comparable to "classically" constructed buildings and offers the same variety of forms and architectural aesthetics. We produce nearly every kind of construction element for building construction, civil engineering and industrial facility construction. With such a broad spectrum of services together with our strong reputation in this sector, we are able to offer tailor-made solutions for every application.
|
|
JUMA Beton is the specialist in the manufacture of WORK OF PRECISION out of precasted concrete.
JUMA Beton produces all kinds of work of precision out of concrete smoothes, gray and this as well for the industrial premises, nonresidential construction, residential construction like for the construction of roads.
|
|
Precast walls can be used in any type of buildings where there is a need for durable, flexible, high quality, fire resistant walls. The thickness of the massive wall units varies between 120 and 200 mm, depending on the strength and sound insulation requirements. The elements are one storey in height, with a maximum of about 4.20 m, exceptionally 4.50 m. This value is generally governed by transport conditions. The length of the panels is mostly between 2.40 m and 14.00 m.
The bearing walls are generally used in combination with hollow-core floors. Other applications are partition walls and elevator and stairwell shafts. Generally, the larger the wall units, the more economic the project, and the better the site productivity.
Precast walls are manufactured on long tables. The molded side is smooth as cast, the top face leveled and floated. Painting or wallpapering is possible after slight surface rendering. Technical ducts and inserts for electricity are incorporated during casting.
|
|
|
|
|
|
Whether you need to build a new industrial or commercial building, or you just want to increase the capacity of your existing facility, High Concrete Wall Systems offer a concrete advantage over traditional building methods. Our precast concrete wall systems give form to your building design %u2014 aesthetically, functionally and economically %u2014 while providing the highest quality, security and value.
All High Concrete precast wall panels are produced at our PCI Certified plant and inspected according to the strictest quality controls. This assures the highest strength and durability to meet heavy load and long length requirements. Because of the inherent strength and durability of precast concrete, our wall panels are non-corrosive and resist dents, punctures and other damage. They also withstand the forces of nature, including rain, hail, fire, floods and earthquakes. And, pests such as termites and vermin, are rarely a problem. In addition to providing security from external threats, High Concrete Wall Systems provide secure internal environments. Clean rooms in laboratories and food processing plants, as well as storage areas, can be designed without ledges so they don't collect dirt. We can provide smooth surfaces to resist soiling and walls can be mildew-proofed. We can even mix the concrete to provide microbiotic resistance.
|
|
TAMPONAMENTO PANELS
Panels precast concrete slabs with boards in cooked trafilato type "Cadeo" (sabbiato fine - red) that they confer to the building the fascination of the masonry you make realized at sight in work. The tamponamento panels can have horizontal or vertical development and various thickness according to the lengths and of the thermal insulation demands.
|
|
|
Still liquid, the concrete lends itself perfectly to the moulding in the most complex forms. Its possibilities in surface textures are also numerous. Surprising results can be obtained by using lattices of shaped formwork.
|
|
To confer on the industrial panels of frontage a finished aspect, we use often various types of granulated in the production.
The use of natural pellets makes it possible to obtain concrete panels with a color of transition. The pellets are made apparent thanks to the application of a process of washing of the panels during the production process.
As we work with natural raw materials, differences can occur just like one can observe it in nature. To be able to judge some, we use scale CIB (see remote loadings) in order to determine the differences admitted.
|
|
This industrial concrete product is used successfully since decades for the coloring of buildings of factories, writing desks and spaces commercial. Before the concrete is not run, the mould intended to receive it is treated with a product which delays hardening of it.
So the part of the concrete in contact with this product hardly does not harden, even at all. After the dismantling, the still liquid concrete is pulverized under a jet with high pressure, in order to emphasize some the grit in relief. The use of granulated of various colors makes it possible to give form to concrete walls presenting a broad panoply of colors. By this method of production, pigments mixed with the concrete make it possible to improve the result still appreciably - what is especially recommended with darker flints.
|
|
In the space of a few years, this product formerly considered as banal became a very appreciated facing of frontage, fully finding its place in the current trend of the sober buildings of company and indémodables.
In the same way, the private sector more and more often has recourse to this natural construction material, primarily when he is married with aluminum, glass and wood. CONDECO obtained for this purpose of the aggregates and most recent means dismantling. After the dismantling, the mural walls are stored in our warehouses in order to support the process of drying. As this one plays a big role for obtaining the final color of the walls, CONDECO decided to convert half of its warehouses of production into storage spaces.
|
|
|
|
|
|
The Echo-Ventilate panel allows to reduce the energetic consumption legacies to the ventilation requirements and of cooling of atmospheres, it contributes to realize, and to maintain, conditions of comfort acclimatizes them. Moreover thanks to its characteristic conformation aging of the materials comes reduced the phenomenon dell%u2019, improving the duration and the resistance of the materials. The mechanical performance of the manufatto one is optimized through the creation of a double armor, in the inner shell and external, that it allows to govern the complanarità of the same panel. L%u2019innovativo arranges of armor profile Echo - license B.S. Italy %u2013è a system to chassis to improved adhesion, opportunely integrated with elettrosaldate bed frames and tondini in steel in order to increase l%u2019inerzia of the panel, so as to reduce the bendings in the manufatti ones of great dimensions.
The Ventilated panel Echo is composed from the following layers:
inner part in reinforced concrete with bidirectional ribbings
layer thermal insulation with correspondent incorporated and modeled d´aria room
external part in reinforced concrete that comprises the superficial finish.
All the layers are rendered from the armor profile Echo loyal.
|
|
ATLAS Beton S.A. produces panels of prestressed and armed concrete frontage.
ATLAS Beton S.A. ensures transport of its own products and, if necessary, by means of adapted trucks. Concrete satisfied all the environmental classes except for: EE4, ES3, ES4 and EA3.
Standard thickness: 20 and 25 cm
Type of elements sandwich
SW 4/6/10 - PS
The insulation consists of expanded polystyrene of weak density (15 kg/m ³).
Value K of the panel = 0,81 W/m ² K.
Value RC of the panel = 1,23 m ² K/W
SW 5/6/9 - PS
The insulation consists of expanded polystyrene of weak density (15 kg/m ³).
Value K of the panel = 0,62 W/m ² K.
Value RC of the panel = 1,62 m ² K/W
SW 4/6/10 - PIR
The insulation consists of polyisocyanure
Value K of the panel = 0,51 W/m ² K.
Value RC of the panel = 1,96 m ² K/W
|
|
All the Mabo panels are produced with the vibrated concrete method; the most evident advantages of this choice lie in the quality of the material (excellent resistance and right to avoid any phenomenon of superficial cracking) and in the possibility of increasing the thickness of the interior insulating layer; the result is the improvement of the insulation of the element.
Regarding the finishing of the panels surface, a long experience in the use of materials, technology and installations brought Mabo to have a so high level of production capacity that can offer a large range of typologies of façades and can comply with the visual and plastic exigencies of many building sectors.
This production ductility permitted the realization of very customized buildings, even though with a repeated basic approach.
|
|
All the Mabo panels are produced with the vibrated concrete method; the most evident advantages of this choice lie in the quality of the material (excellent resistance and right to avoid any phenomenon of superficial cracking) and in the possibility of increasing the thickness of the interior insulating layer; the result is the improvement of the insulation of the element.
Regarding the finishing of the panels surface, a long experience in the use of materials, technology and installations brought Mabo to have a so high level of production capacity that can offer a large range of typologies of façades and can comply with the visual and plastic exigencies of many building sectors.
This production ductility permitted the realization of very customized buildings, even though with a repeated basic approach.
|
|
| ... products without information |
| |
|
|
Precast reinforced concrete wall panels
