|
|
|
Glulam is a high-quality material which is useful in a wide range of applications and possesses outstanding properties. It can be incorporated ideally in interior design and is particularly attractive.
|
|
|
Softwood beams are produced by gluing two solid timber pieces together with the grain running parallel and the end sections the same size. The result of this process is larger or more structurally stable sections.
|
|
For high-quality floor, wall and ceiling structures, value should be placed on the use of qualitatively immaculate material for the substructures.
In practice, however, substructures are frequently constructed from sawn slats, which tend to twist and distort. The result for the craftsman is damage which is expensive to remedy and aggravation from complaints.
Finger-jointed battens from Mosser are manufactured using carefully dried timber. Imperfections in the raw material, which could affect the functionality of the product, are eliminated and the pieces are put together with finger-joints. The resulting battens, manufactured and planed to exact measurements using this complex method, offer optimal conditions for every type of substructure.
Twisting or shrinking of the substructure and all associated problems are finally over and done with.
|
|
1) Flange: Solid sawn pine lumber flange or LVL flange
2) Web: Pine plywood
3) Length: 2.5, 2.9, 3.3, 3.36, 3.9, 4.5, 1.9, 5.9
4) Specification: H200X80X27X40mm
4) Weight per running meter: 5.0kg
5) Bending: 3/720
6) Permissble bending moment: M=95kn/m
7) live load: 1613.3kn/m3
8) Permissible shear force: Q=595KN
9) Characteristic: Low cost, high straight, weight light. Generally be used, adapt to E2 environmental standard. High standardization of product parts, good to be reused.
|
|
H20 Beam
i beam(i-josit)
length cm:180/245/290/330/360/390/490/590
Live load(bending stiffness):max 500kn/m2
material: made of high-grade solid sawn pine lumber and pine plywood,LVL pine plywood
glude:MUF warterproof glue
color:yellow
Overall beam depth H: within 1 mm
Flange width and depth: within 1 mm
Web thickness: within 0,5 mm
Maximum moisture content by the time of assembly is 18 % for the timber flanges and 10 % for the web boards.
The system product parts standardizes degree is high, reused well, meet the environmental protection request.
|
|
|
The Kaufmann HT20plus formwork timber beam is a solid I-beam used for concrete formwork construction. The height of the beam is 20 cm and it is available in different standard lengths. The patented, stable synthetic cap prevents premature splintering at the high sensitive chord ends. The HT20plus is successfully used for many years worldwide - in over 50 countries.
|
|
A) Flange:solid sawn pine lumber flange
B) Pine plywood web.
C) WBP phenolic resin (professional glue for H Beam)
D) Painting on the surface of flange and web: with yellow, waterproof, fireproof, rot-proof and frozen-proof
painting, and the painting is environment friendly, meeting the environmental protection request.
Weight per running meter: 5.2-6.5kg
Bending moment -- max. 5kN/m
Shear force: min 11.0kN
Bending: max 1/500
Live load (Bending stiffness) Max 500kN/m2
H.S. Code 2007: 44186000.90
|
|
Ecojoist® beams consist of parallel stress graded timber flanges joined together with engineered V shaped galvanised steel webs. The webs are fixed to the flanges via nail-plate zones top and bottom.
Benefits of using Ecojoist®:
- Robust Standard Detail
- Depth compatible with solid joist sizes
- Made to measure, reducing on site wastage
- Minimal shrinkage or swelling
- Reduction or elimination of surface run pipe work
- Lightweight construction
|
|
|
|
Wooden structures: other engineered wood products
