|
|
|
The ASD slim-line Emergency Sign is manufactured in a white coated steel housing with a choice of screen printed legends. The Sign 8 is available in 3 hour maintained, non maintained or sustained formats. All fittings are complete with lamps.
|
|
|
Ceiling-mounted luminaire WINDOW-SAVE, for 1 x fluorescent tube 8W, housing in aluminium, white, high-gloss reflector, clear acrylic glass disc, with electronic control gear, with fluorescent tube, with 2 x pictogram, without battery pack Protection class I, IP40 Recognition wide: 28 m L = 320 mm B = 54 mm H = 301 mm
|
|
Housing: Vandal-resistant, self-extinguishing, UV-stabilized, anti-yellowing grey polycarbonate, .
Diffuser: Vandal resistant, V2 self-extinguishing, UV-stabilised clear polycarbonate.
Equipment: with bracket
Regulations: Manufactured in compliance with EN60598 - CEI 34 -21 standards. The level of protection complies with the EN60529 standard.
S.A. Emergency (Maintained): In the event of a black-out the one lamp connected to the back-up circuit stays on, thus avoiding the inconvenience caused by a sudden absence of all light.
Emergency run time: 180 minutes. When power is restored, the battery recharges automatically in 24 hours.
|
|
LED Kit "Emergency Exit" Type AT783
The LED-installation kit AT783 was specially designed and developed for remodelling and fitting of existing emergency exit lighting systems with traditional illuminants. Time and effort spent on maintenance and the high costs involved therein are now a thing of the past.
Groundbreaking
Our LED-installation kit is virtually maintenance-free. Under ideal operation the durability of a LED lasts up to 100.000 hours. That´s more than 11 years of continuous operation! Existing emergency exit lighting systems could easily be retooled into our newest energy saving LED-technology without major technical or financial investment.
Easy to handle
The installation kit consists of 10 light diodes with an output of 10 Watts altogether.
|
|
Exit sign with individual battery or for use with central battery systems
Synthetic housing with metal base.
Viewing distance: up to 40m.
Designed for supermarkets and shopping malls.
|
|
Equipments in buildings of a prestigious nature have to
harmonise in colour and shape with the interior design.
Exit signs should also comply with this requirement.
The SOFTLUX features an aluminium section with integrated
light source. Thanks to its particular shape, this
aluminium section can be fitted with coloured inserts to
match the surrounding decoration. The electronics and
eventually the individual battery are housed in a trapezoid
housing. This trapezoid housing can be either screwed to
the wall/ceiling or recessed into the false ceiling. It can
be also housed in an embedding case for wall or ceiling
mounting. Special features as fire-proof cable or self-test
are also available.
|
|
Exit sign
Light the way
Yacht names are not the only reason to use Yachtlite lettering:
Illuminating door or guidance signs ensure clarity day and night.
|
|
Description:
Rectangular or square plate made of acrylic material (PMMA)
with an engraved or non-engraved emergency sign adhered to the back and a thin decorative aluminium contour on the top so that it blends perfectly with the surroundings.
LED technology that provides an uniform and long-term lighting and a final solution for the maintained signalling
Characteristics:
Format: VIR Pennant, Ceiling-mounted, Suspended and Wall-mounted
Sizes: VIR 195X320, 210X210, 160x160 mm
Operation: Maintained, Luminaire and No Lighting
Voltage: 230 V-50 Hz, 24V AC/DC
Autonomy (h): 1h and 3h
Charging indicator: LED (for self-contained models*)
Light source: 32, 20 or 12 white SMD LEDs
Degree of protection: IP42 IK03
Electrical insulation: Type II, Type III
Remote stand-by: Yes (for self-contained models*)
Test device: For AutoTest and TCA models
Viewing distance according to EN 1838 < 32, 40, 27 m
|
|
1844 ST Raphaël - Bidirectional 2x12 LEDs marker of ergonomic design especially conceived for integration in pedestrian or low-speed areas (resistance 2,5T) such as alleys and car parks.
Compliant with the NF EN 60598-2-22 standard (luminaires for safety lighting)
Available in red, yellow/ orange, green, blue or white.
Resistence to mechanical impacts 60J
IP67
|
|
Since its creation, resulting from a very demanding CCTP to the level of the road security, the stud TUNNEL proved reliable in the small ones or large tunnels (Tunnel of Dullin in the Rhone-Alps area, tunnel of a14 Highway in Paris area) with remarkable a quality ratio/price.
The Tunnel stud is dedicated to the beaconing of the wire of ARIANE in the tunnels
|
|
The Beacon extra Punt is a stud of beaconing to diodes LED, approved AEAS. The use of the studs of beaconing on the ground tends to spread in carpark. They replace the autonomous blocks 60 lumens whose positioning became delicate and blames their effectiveness since, in particular, the development of the carparks without pillars and the carparks external.
Developed in collaboration with indicating it Mauricio Clavero, this beacon can also be installed in many applications of decoration.
|
|
Description:
Round body with pronounced edges that consists of a housing made of PC/ASA and a polycarbonate diffuser. Consists of a fluorescent tube that is switched on if the mains power fails.
Characteristics:
Format: SOL
Operation: Non-maintained, Maintained and Combined
Autonomy (h): 1h, 2h and 3h
Voltage: 230 V 50Hz, 110/120V-60Hz
Emergency lamp: FL 4 W, 2D 16 W
Lumens: 70 / 500 Lm
Charging indicator: LED
Mains lamp: FL 4 W, 2D 16 W
Degree of protection: IP42 IK07
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Viewing distance according to EN 1838 < 41,6 m
|
|
Description:
Square body with raised edges that consist of an aluminium housing, a simple or double polycarbonate diffuser and a fluorescent lamp that switches on if the network power supply fails.
Characteristics:
Format: ORTO Surface, Recessed, Pennant
Operation: Non-maintained, Maintained and Combined
Voltage: 230 V 50Hz
Autonomy (h): 1h, 2h and 3h
Emergency lamp: FL 6W, PL 11W
Lumens: 100 / 490 Lm
Charging indicator: LED
Mains lamp: FL 6W, PL 11W
Degree of protection: IP42 IK04
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Viewing distance according to EN 1838 < 46 m
|
|
Description:
Square body with pronounced edges, comprising a housing made of PC/ASA and a polycarbonate diffuser and it consists of a fluorescent tube that is switched on if the mains power fails.
Characteristics:
Format: NORMA
Operation: Non-maintained, Maintained and Combined
Voltage: 230 V 50Hz, 110/120V-60Hz
Autonomy (h): 1h, 2h and 3h
Emergency lamp: FL 4 W, 2D16W
Lumens: 70 / 500 Lm
Charging indicator: LED
Mains lamp: FL 4 W, 2D16W
Degree of protection: IP42 IK04
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Viewing distance according to EN 1838 < 41,6 m
|
|
Description:
Square body whose front parts form a slightly curved plate. Consists of a decorative housing made of PC/ASA with a polycarbonate diffuser and of a fluorescent tube that is switched on if the mains power fails. It can be adjusted either horizontally or vertically.
Characteristics:
Format: MYRA
Operation: Non-maintained, Maintained and Combined
Voltage: 230 V 50Hz, 110/120V-60Hz
Autonomy (h): 1h, 2h and 3h
Emergency lamp: FL 4 W, 2D16W
Lumens: 75 / 550 Lm
Charging indicator: LED
Mains lamp: FL 4 W, 2D16W
Degree of protection: IP42 IK07
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Viewing distance according to EN 1838 < 36,9 m
|
|
Description:
Decorative self-contained block consisting of a large box made of PC/ASA, with directional spotlights on the joined to the housing with chrome signs. Consists of 2 or 4 fluorescent lamps PL 11 W or PAR36 that switch on if the network power supply fails.
The connection system is direct and has a front panel with two optical devices (LED) that indicate the status of the luminaire.
Characteristics:
Format: ZENIT
Operation: Non-maintained
Voltage: 230 V 50Hz
Autonomy (h): 1h, 2h, 3h and 4h
Emergency lamp: PL 11 W, PAR 36W
Lumens: 300 / 2545 Lm
Charging indicator: LED
Mains lamp: -
Degree of protection: IP42 IK04
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
|
|
Description:
Rectangular body whose visible side or sides are a slanted surface with rounded edges. Consists of a decorative housing made of PC/ASA and a polycarbonate diffuser. Consists of a fluorescent tube that is switched on if the mains power fails.
Characteristics:
Format: ARGOS Simple, Double and Recessed
Operation: Non-maintained, Maintained and Combined
Voltage: 230 V 50Hz, 110/120V-60Hz
Autonomy (h): 1h, 2h and 3h
Emergency lamp: FL 8 W, PL 11 W
Lumens: 55 / 460 Lm
Charging indicator: LED
Mains lamp: FL 8 W
Degree of protection: IP32 IK04, IP42 IK04 and IP44 IK04
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Viewing distance according to EN 1838 < 14 - 19 m
|
|
Description:
Circular body with rounded edges which consists of a decorative housing made of PC/ASA and a polycarbonate diffuser.
Consists of a fluorescent tube that is switched on if the mains power fails.
Characteristics:
Format: IRIS
Operation: Non-maintained, Maintained and Combined
Voltage: 230 V 50Hz, 110/120V-60Hz
Autonomy (h): 1h, 2h and 3h
Emergency lamp: FL 4 W, 2D 16 W
Lumens: 70 / 500Lm
Charging indicator: LED
Mains lamp: FL 4 W, 2D 16 W
Degree of protection: IP42 IK07
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Viewing distance according to EN 1838 < 37 m
|
|
Description:
Rectangular body with pronounced edges, comprising a polycarbonate housing and diffuser. Consists of a fluorescent tube that is switched on if the mains power fails.
Characteristics:
Format: HYDRA
Operation: Non-maintained and Combined
Voltage: 230 V 50Hz, 110/120V-60Hz
Autonomy (h): 1h, 2h and 3h
Emergency lamp: FL 8 W
Lumens: 95 / 450 Lm
Charging indicator: LED
Mains lamp: FL 8 W
Degree of protection: IP42 IK04 (Sealed box IP66 IK08)
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Viewing distance according to EN 1838 < 19 m
|
|
Description:
Rectangular body with pronounced edges, comprising a polycarbonate housing and diffuser. Consists of a fluorescent lamp that switches on if the network power supply fails.
Characteristics:
Format: GALIA Surface, Pennant, Suspended and Ceiling-mounted
Operation: Non-maintained, Maintained and Combined
Voltage: 230 V 50Hz
Autonomy (h): 1h, 2h and 3h
Emergency lamp: FL 8 W
Charging indicator: LED
Mains lamp: FL 8 W
Degree of protection: IP42 IK04
Electrical insulation: Type II
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Viewing distance according to EN 1838 < 30 m
|
|
Description:
Rectangular body with raised edges that consist of an aluminium housing and a polycarbonate diffuser.
With a mounting system for connection to a rail.
Consists of a fluorescent tube that is switched on if the mains power fails.
Characteristics:
Format: CARRIL
Operation: Non-maintained
Voltage: 230 V 50Hz
Autonomy (h): 1h and 3h
Emergency lamp: FL 8 W DLX
Lumens: 100 / 210 Lm
Charging indicator: LED
Mains lamp: -
Degree of protection: IP22 IK04
Electrical insulation: Type II
Test device: No
Remote stand-by: No
|
|
|
This compact Polycarbonate 3 Hour non - maintained fitting is rated at IP65 and is available with either single or twin 4w lamps. All fittings come complete with lamps.
|
|
Description:
Aluminium and borosilicate glass housings, specially conceived for an arquitectural context, mainly industrial.
Made in accordance with European directives 93/68/CE, 89/336/CE and 94/9/CE governing electromagnetic and explosive atmosphere compatibility. Consists of a fluorescent tube that is switched on if the mains power fails
Characteristics:
Format: EXPLOSION-PROOF
Operation: Non-maintained and Combined
Voltage: 230 V 50Hz, 110/120V-60Hz
Autonomy (h): 1h and 3h
Emergency lamp: FL 8 W PL 11 W
Lumens: 140 / 620 Lm
Charging indicator: LED
Mains lamp: FL 8 W
Degree of protection: IP67 IK04
Electrical insulation: Type I
Test device: For AutoTest and TCA models
Remote stand-by: Yes
Classification: II2G EEX d IIC T6 - II2D IP 67 T85ºC.
|
|
AP Range
Emergency floodlighting unit with individual battery.
Metal housing. Designed for industrial buildings.
Range: up to 37m.
|
|
|
|
|
|
Pictogram of identification of the installations of fire control.
The supports are made up as follows:
A square of 90 mm with dimensions, out of aluminum of 25/10ème enamelled epoxy red security RAL 3001 on which is screen printed the pictogram security of standard NF S 60-303. The support comprises a drilling milled to be able to be fixed using a milled capscrew.
Instructions of security
The support consists of an enamelled aluminum plate of 25/10ème epoxy red security RAL 3001 on which the text of the instructions of security of standard NF S is screen printed 60-303. The support comprises two drillings milled to be able to be fixed using two capscrews milled.
General plan of intervention, plan of intervention and plan of drainage
These supports are composed of the following elements:
Part supporting the plans of the stages of the building makes up of 2 plates of LDC (poly methacrylate of methyl) polished songs the 3 mm thickness allowing insertion of a polyester film printed by laser writer or jet of ink. These plates are with the format A3 (297x420 mm).
The parts in head and foot of plan which support the heading of the plan (and in the case of the plans of intervention and drainages, instructions of securities) out of aluminum epoxy 25/10ème are enamelled (red security RAL 3001 and green security RAL 6032 for "plan of drainage"). The supports are fixed by screwing, with 4 capscrews milled.
|
|
Wall plate SICURLINE
Safety signs
With safety pictogram.
Design: flat modular elements
Dimensions: small-medium-big size
Uses: indoor and outdoor
Applications: targhe e pannelli a parete, targhe a bandiera e sospese, da tavolo, su supporto da terra e su palina ovale; con o senza cornice
Materials: piastre in alluminio, anodizzato o verniciato, con terminali in materiale plastico, cornici in alluminio verniciato con angolari in materiale plastico. Montanti e supporti in alluminio anodizzato o verniciato completi di base in acciaio zincato e rivestita superiormente con alluminio.
Graphics: prevalentemente permanente in vinile prespaziato o in stampa digitale adesiva; in taluni casi è possibile avere della grafica intercambiabile su supporto cartaceo oppure integrando il sistema dei moduli Clip
|
|
|
|
|
|
The illumination level along the centre line of the escape
routes should not be less than one lux. In some cases,
it is not possible to integrate the emergency lighting
into the already existing lighting system. In other cases,
because of technical and safety reasons, the emergency
lighting must be installed separately from the mains
lighting. For such applications we offer the AL range of
LED-spotlights. These lamps can be mounted on or into
the ceiling either as a surface or as a recessed fitting.
In the model for evacuation lighting, the LED are disposed
in such a way that the light is distributed over the
longitudinal axis of the escape route.
The model for orientation lighting is designed so that the
light is distributed in all directions over the circulation
route. In both cases, the suspension height must not
exceed 2.50m. The lamp is available either with individual
battery, or with group battery or for use with central battery
systems. It comes in two versions for 24 Volts or 230
Volts AC/DC connection.
|
|
PUBLI SIGNED: Small rule aluminum equipped with diodes 0 5 mm, the small rule is used as support and of source of lighting, the light injected into the plate makes it possible to make your engraving luminous.
|
|
|
|
Emergency exit signs and lighting
