|
|
| Products 151 to 180 of 186 |
Renewable Energy Development
Light fitting of aluminum and glass Eclisse type IP66 IK10 Class III
Light height of 4 metres
Adjustable through 360 °
12 LEDs at 120 lumens per Watt
Shrunk tubular post of treated galvanized steel
Thermo-lacquered finish in choice of RAL colours
Head diameter 90 mm
Diameter at base 160 mm (batteries)
Photovoltaic panel of 100 cm x 70 cm
|
|
The one, management board ActivaSun conceived and made in France
leading-edge technology in the management of solar light allows
to control several parameters:
- Adjustment of the power of lighting on 3 levels/Adjustments of the level of the battery on 3 levels
- Management of the power of lighting according to the consumption of the beach of tension.
- Battery preserved (impossibility of unloading) for one optimized lifespan 5 with 7ans.
- Adjustments of the threshold of lighting and exctinction (in connection with the production of the solar panel)
- Programmable Schedule with lighting.
|
|
AZULY supplements its solar aeolian offer by a photovoltaic group. .. . Ready to install! The LED solar mast provides an effective and comfortable bright light. The photovoltaic panel supplies 28 or 56 LED according to model. The electronic management card insures different settings: automatic start, illumination length, periodicity... The equipment height prevents deteriorations.
This monoblock compact group, on one aesthetic concrete mast, is ready to install.
Applications: insulated sites, bus stops, walk ways, school bus operation, technical buildings, waste reception centers, sports fields surroundings, but also rail and waterways network, Condominium parks, parking lots . . .
|
|
|
Fruit of a step of éco-design, floor lamp AUTONOMA is dedicated to the lighting of isolated site. Equip with LED of power which combines luminous performance and energy saving, it is also programmable and intelligent thanks to its presence detector.
|
|
|
|
|
|
TECHNICAL CHARACTERISTICS
FREELUM is a modular unit composed of four parts to fit together.
Total height : 4m.50 to 5m., (with the solar panel), wholly in aluminium, thermo-lacquered (polyester powder)
1°) THE SOLAR PANEL :
- Dimension : 1200 x 520 mm
- Power of charge : 80 to 85 Watts/p
- Fixing by an articulated infrastructure swivelling on 360° allowing the South orientation of the solar panel as well as its, optimal incline angle (45 to 60°).
- Monocrystalline type, life approximately 20 years.
2°) THE LED SOLAR LAMP (IP66) :
- 366 led of 27 candelas, daylight type.
- Life approximately 80.000 hours.
- Patented optoelectronic system EVERLUM allowing the best distribution of the led light on the ground, excluding any luminous pollution.
- Tight infrastructure, shock-proof.
3°) THE MIDDLE TUBE
4°) THE BASE IS COMPOSED OF :
a) TIGHT MOBILE SLIDING TRAP
- Located on the low base plate of the unit, this patented sliding system (ROLLTRAP) protects electronic control and regulation of energy.
b) ELECTRONIC CONTROL AND REGULATION OF :
- The charge of the batteries from the photovoltaic module.
- The current limiting of the leds
- The power of lighting according to the charge of the batteries.
c) THE BATTERIES CONTAINER
- Dimension : 500 mm of height, diameter 300mm
- Fixing with two sliding rings
- Locking anti vandalism on the base
- Contains 2 solar batteries of 40 Ah each one, life of 5 to 7 years.
d) THE BASE TO FIX ON THE GROUND:
- On a base with six points of fixation, to fix on the concrete base with an electrolysis protection according to instructions of installation.
|
|
|
|
|
|
A revolutionary road lighting fixture uses the best technologies available to increase safety for pedestrians, while reducing environmental impact.
Designed by Giugiaro Architettura and manufactured by Disano illuminazione, OnOff was launched at Remade, Portugal, the exhibition of high-tech products that are built using recycled and recyclable materials.
The project is part of a number of events promoted by Cestec, a Lombardy-based company created to support manufacturers in the production of excellent products, using environmentally friendly recyclable materials.
OnOff is a lighting fixture specially developed to increase safety for pedestrians and to reduce environmental impact starting from the production stage.
The luminaire is made of aluminium, an entirely recyclable material, whose design combines a pole and a lighting fixture into one single object.
As to consumption, the opportunity to exploit solar power is the most interesting aspect. In fact, a photovoltaic panel is fitted on the lamp cover. That means that OnOff can be powered independently without connecting it to the mains. The batteries provide in any event a five-day run time in the absence of solar radiation.
The photovoltaic system turns solar power into electricity, thanks to the use of semiconductor materials such as silicon, which is reduced to sheets to create photovoltaic cells.
|
|
|
|
|
|
The new lamppost to solar energy photovoltaic NTH LED-Light, thanks to a new source of light realized with luminous diode valves (LED), marks important carrying out in the systems of independent lighting, introducing levels of yield and reliabilities that appeared ago unattainable till little years, joined to a more and more competitive cost.
The peculiar characteristics of NTH LED-light are the following ones: Light of color WHITE MAN therefore a better perception of the colors and the details from the human eye to illuminamento parity
- Unidirectional Light emission therefore total luminous pollution absence
- Illuminamento of the advanced street plan to that one of a lamp to the sodium to lowland pressure to power parity
- Advanced Duration to any type of lamp to filament or discharge of gas with a average life before an breakdown (MTBF) of approximately 100.000 hours
- Luminous Source adjustable and composed from a high number of independent units
- Insensibilità to the temperature, therefore optimal yield also in the more rigid climates
|
|
Bulk inquiries Only from Architects, Developers and Contractors
VIGO . Illuminating Column
Housing constructed from round aluminium tubing. PMMA diffuser.
Compact control gear assembly mounts in lower section of luminaire housing.
VIGO G . Illuminating Column - Straight cut diffuser end.
VIGO K . Illuminating Column - Clear PMMA enclosure.
VIGO KM. Illuminating Column . Mini reflector.
VIGO KG . Illuminating Column . Straight cut enclosure.
VIGO KGM. Illuminating Column . Mini reflector . Straight cut enclosure.
Comes in RAL, soft, mica or DB finish.
Flange plate and separate embedded base included.
Ingress protection IP 54, Protection rating I
|
|
Bulk inquiries Only from Architects, Developers and Contractors
NIGHT ELEMENTS . Illuminating Light Column
Columnar lighting system with different top, base and, if required, intermediate extension modules.
Constructed from aluminium tube section and cast aluminium. 230 mm diameter, maximum height of 6 m and maximum wattage of 300 W.
All of the modules pivot through 360°.
Comes in RAL 9006 (Series 612) (light silver) finish.
Ingress protection IP 65, Protection rating I
|
|
|
New solar lighting Sun-26 (Sox 26) uses photovoltaic cells to convert the solar radiation into emectric energy. This energy is emmagisinée in a battery during the day and is restored the night to supply a lamp with sodium vapor.
|
|
Daylight received by a solar module fixed at the top of the floor lamp is transformed into electricity. This one is stored the day in the batteries, then is used starting from the twilight to ensure a lighting of 8:00 (optimum condition of sunning).
Luminous power of the projector (3600 Lumens) with for vocation the lighting of security of allotments, carparks, industrial park, isolated bus shelters.
Characteristics:
Height of mast of 5 mêtres. Height of fire of 4 mêtres. Lighting: 25 luxes with the foot of the candelabrum, 2 luxes with 10 Mr. Lampe: SOX 26 W, Sodium low pressure
|
|
Self-powered street lamp with photovoltaic system
- Economical
- Easy to install
- Non-polluting, conforms to Kyoto protocolo
- Easily transported for temporary and emergency lighting
- No electricity bills (Enel)
Advantages
The photovoltaic solar lighting system has several important features::
- It does not require mains electricity supply:
every pole is independent and is no way connected to the others;
- Energy is generated exclusively from sunlight:
it is stored during the day and supplied at night;
- No operator action is required:
once programmed, the electronic control unit turns the system On and Off independently;
- The system is highly reliable:
since it is totally built with solid state components;.
|
|
|
Tapered cylindrical wooden shaft in glued laminated timber (GLULAM and FSC certifi ed) designed according to the Aubrilam HTE-E process in conformity with EN335, EN386 and EN350, fi nished with three coats of woodstain. Cylindrical base in galvanised steel fi nished in powder coated polyester. Ventilated base. Arm and fork supporting the solar panels in aluminium fi nished in powder coated polyester. Solar panels in poly-cristalline silicon. Electronic regulator with automatic surveillance of lighting intensities (night/day diff erentiation). Programmable built-in timer (lighting evening or dawn). Optimised battery management system. Weatherproof lead batteries with gelled electrolyte, maintenance-free. LED LUXEON InGaN Luminaire with polycarbonate diff user and aluminium body.
|
|
BATTERY CUPBOARD:
Made out of 3 mm thick hot-galvanised plate, with a polyurethane lid.
COLUMN:
Made out of a 4 mm thick DIN 2440 hot-galvanised steel tube, 100 mm in diameter.
SOLAR PANEL SUPPORT:
It consists of a 4 mm thick curved hot-galvanised steel tube, 90 mm in diameter, and a 3 mm thick hot-galvanised plate protecting the rear of the panel.
NUTS AND BOLTS:
In A4 stainless steel.
|
|
The Verdant Walk, Cleveland, OH
Project concept and design by North Design Office for Cleveland Public Art
Photography: North Design Office
The green city of the future shines through this sculptural installation for a Cleveland art park. The park reflects two forces: the city’s heritage of craftsmanship and its new green agenda. We covered irregular forms with flexible, solar-paneled skins; these charge LEDs that glow within the forms at night. The designer asked that our frame look “hand bent”, hence the organic kinks. In winter, the fabric is removed to showcase the metal armatures as sculpture.
|
|
|
The new Solar Street Light HELIOS SOX 26 VARIO is a revolutionary system composed of photovoltaic modules which converts the sunlight into electric power. This energy is stored in a battery during the day and made available in night-time to power a sodium vapour lamp, also thanks to the new intelligent charge regulator GENIUS 15 VARIO. This is the ideal answer when there is the need of lighting squares, streets, crossings and no available electric power grid nearby. The new Solar Street Light HELIOS SOX 26 VARIO typically starts lighting after sunset and stops at sunrise automatically.
|
|
Together of lighting with solar energy, Hélios offers an ideal solution
for the zones except electrical communication. Simple or double solar panel,
with adaptable slope. 1 or 2 batteries placed in a careenage in thermoformé ABS. System of electronic regulation programmable.
2 possible types of lighting:
- Body profiled in thermoformé, optical ABS road and clear closing
out of methacrylate; 18 to 42 W Fluo compact.
- Discera 400, cast aluminum body, optical STX minis-R and clear tempered glass closing; 20 W Metal Iodides.
Installation on mast steel Ø 127 mm,
height from 3,00 to 5,50 Mr.
Thermolaquage Ral or Futura, color with
choices, the parts in ABS are always gray.
|
|
| ... products without information |
| |
Cover and Body Frame
Polyamide Reinforced with Fibre Glass injected in original colours, submitted to a Tropicalized Treatment against U.V radiations.
Diffuser
Stabilized Polycarbonate against U.V radiations, Opal or Transparent.
Supplied with Lamp Holder, Louvered Ring reflector and Control Gear. Even in Double Level (D/L).
Lantern suitable for Compact Fluorescent lamps (Low Consumption) Up to 120W.
|
|
Cover and Body Frame
Polyamide Reinforced with Fibre Glass injected in original colours, submitted to a Tropicalized Treatment against U.V radiations.
Diffuser
Stabilized Polycarbonate against U.V radiations, Opal or Transparent.
Supplied with Lamp Holder, Louvered Ring reflector and Control Gear. Even in Double Level (D/L).
Lantern suitable for Compact Fluorescent lamps (Low Consumption) Up to 120W.
|
|
|
|
Urban lighting: lamp posts
