|
|
|
|
|
|
Alfredo Arribas has designed a modern street lamp with a classic lenticular shape. Thus, he enlarges the projection of light of the classical globe in the bottom half and avoids light pollution with the opaque top half.
Technical Specifications
Cylindrical 114mm diameter column of hot-galvanized or sandblasted stainless steel AISI 316.
Optionally, it can be delivered painted.
85 cm diameter translucent, natural colour, polyethylene light with aluminium reflector powder-painted in white.
An anti-rust, sandblasted, cast aluminium ring joins column and light.
For 150 W induction or discharge lamps (high pressure sodium vapour or metallic halide lamps).
The street lamp is delivered disassembled. Assembly instructions are included.
The column is fixed using a concrete cube made on site and anchor bolts, 20cm below the paving. The foundations should provide a slot for the electrical connection.
Anchorage bolts and template come with the column.
Normal part replacement and maintenance.
Weight: 48 kg.
Class I IP-55.
|
|
Simple and functional street lamp, which arose from an angle, with a continuous rectangular cross-section shaft, designed to be useful without prominence.
Technical Specifications
Hot-galvanized steel tube column and arm, with a 120x280mm continuous cross-section.
The arm has a 15 degree lean in relation to the horizontal.
Optical unit and extrusion reflector in high shine anodized aluminium and tempered glass diffuser, equipped for discharge lamps, metallic halides or high pressure sodium vapour (max. 150 W).
Optionally, double level equipments can be included for the commande line.
The element is delivered disassembled. The assembly instructions are enclosed with the lamp.
The column is fixed using a concrete cube created in situ and anchor bolts, 20 cm below the paving. The foundations should provide a slot for the electrical connection.
The pattern and the anchor bolts are delivered with the column.
Usual replacements and maintenance for the units.
Weight: 105 Kg.
Class I IP-55.
|
|
|
|
|
|
ADI FAD Silver Delta 2001
This street lamp is a tree of light created for a three-fold objective: for ground-projected lighting, reduced consumption and an optional number of lamps at different heights and in different positions.
Technical Specifications
4,70 or 6,20 m high and 127 mm diameter columns of hot-galvanized steel or polished/aluminium finish stainless steel AISI 304*, for 1 or 2 lights of identical or different heights.
4,70 or 6,20 m high double-section columns with a squared galvanized tube of 140x140 mm, painted in the lower part, or with stainless steel polished tube of 129 mm diameter.
8 meters high double-section columns of hot galvanised steel with a 152 mm diameter in the lower part and a 127 mm diameter in the superior one, for 1 or 2 lights of similar or different heights.
6,20 or 8,20 m high double-section columns with a 152 mm diameter hot-galvanized and painted tube in the lower part and a 129 mm diameter stainless steel polished finish tube in the superior one, for 1 or 2 lights of similar or different heights, or for 5 lights in different heights (for the 8,20 diameter column).
Optionally, the galvanized columns can be delivered painted.
Attachment bridle made of grey injected polyamide with fibreglass reinforcement, aluminium reflector and hardened-glass diffuser.
For discharge lights of high-pressure sodium vapour, or metallic halides lights (max. 150 W).
Optionally, double level equipments can be included for the command line.
Weights Rama lamp: 1 / 2: 8 Kg / 13.5 Kg.
Column 4.70m / 6.00m / 8.00 m: 48 Kg / 60 Kg / 88 Kg.
Class I IP-65.
|
|
THE BOWLER
The Bowler is approx. 4.5 metres high. The fitting gives all round illumination and can be equipped with various lamp/optical combinations. The triangle with ring is of stainless steel, which at night has a twinkling affect from the light above. The mast is coated and equipped with a connection unit. The Bowler masts lend themselves well to plazas and orientation lines in the landscape.
|
|
Class 1 230V 50Hz IP44
Description: Silvergrey enamelled steel. Shade in clear acrylic and reflector in aluminium.
Mounting: On pole top D 60mm.
Connection: Terminalblock 4x10mm2 in pole.
Design: Wingårdh Arkitektkontor
|
|
Pole top luminaires with widespread distribution
A new incarnation of a BEGA Classic. This shallow and sleek luminaire
provides widespread, uniform illumination from compact fl uorescent sources.
Available with two lamp confi gurations to meet a diverse set of pole height and
lighting requirements.
Housing/fi tter: Lower slip fi tter is made from a single die-cast aluminum part
which includes four support arms and the lower diffuser frame. The fi xture
slip fi ts a 3" O.D. pole top or tenon and is secured by four stainless steel set
screws. The top portion of the lamp housing is made from heavy gauge spun
aluminum. Relamping is achieved by removing a single threaded fastener at
the top of the fi xture.
|
|
Pole top with symmetrical distribution
Designed for the illumination of walkways, open pedestrian scale landscape areas, parking areas, and roadways featuring symmetrical distribution.
Pole top luminaires with full internal reflector with die-cast aluminum step baffle. Clear tempered glass and 12° vertical adjustment.
U.L. listed, suitable for wet locations.
Protection class: IP 65
Finish: Standard BEGA colors.
|
|
|
Royal lighting Light Height 7 m with photovoltaic and led RGB conforms to the standard INTO 40 design by City Design
|
|
-Siléo small model
Metal halides with ceramic burner - G12 base: 150 W
COSMOPOLIS range: 140 W
-Siléo large model
High pressure sodium: 400 W
Metal halides: 400 W
Mercury vapour: 250 W
|
|
-Luminaire available in two sizes : Enza 25 and Enza 35
-Optics and switchgear to IP 66
-Class I or II protection
-Body in pressure-cast aluminum
-Reflectors in bright-dipped, anodized aluminum : Optitec® 25 and Optitec® 35
-Bowl in heat-tempered pressed glass to IK 09 (10 joules)
Self-cleaning glass available on option
-MULTIBOX® switchgear and equipment module, with GRP-reinforced polyamide separator
-LED indicates electrical powered-supply presence
-EASYLINK® fi xing system
-ULOR < 3%
-Enza is eligible for the Energy-saving Certifi cate
-Compliance with WEEE undertakings: rate of recyclability greater than 95%
-Complies with the European RoHS directive
|
|
-High pressure sodium: 70 to 400 W
-Metal halide: 35 to 400 W
-Mercury vapour: 50 to 250 W
-Compact fluorescent
|
|
Viarmes series
Mechanically soldered Luminaire
Metal and finish options: painted aluminum,
copper patinated or patinated and varnished
Protection: IP 66 - Class 1 or class 2 insulation
PPMA diffuser
Hanging Viarmes TPM
Height: 385 mm - ø : 420 mm
Weight: 2,50 Kg (alu), 3,00 Kg (copper)
Wattage: 70 to 80 W - Windage area: 0,135 m2
Suggested mounting height: 3,00 to 4,00 m
Hanging Viarmes PM
Height: 480 mm - ø : 520 mm
Weight: 3,50 Kg (alu), 4,00 Kg (copper)
Wattage: 80 to 150 W - Windage area: 0,19 m2
Suggested mounting height: 3,00 to 6,00 m
Postmount Viarmes PM
Height: 670 mm - ø : 520 mm
Weight: 3,50 Kg (alu), 4,00 Kg (copper)
Wattage: 80 to 150 W - Windage area: 0,19 m2
Suggested mounting height: 3,00 to 4,00 m
Hanging Viarmes GM
Height: 630 mm - ø : 680 mm
Weight: 4,00 Kg (alu), 4,50 Kg (copper)
Wattage: 150 to 250 W - Windage area: 0,316 m2
Suggested mounting height: 7,00 to 10,00 m
|
|
Valberg series
Postmount or hanging luminaire, mechanically soldered (except Valberg 70: hanging exclusively) Metal and finish options: brass and copper, patinated or patinated and famished, stainless steel and painted aluminum Protection: IP 23 or IP66 ■ Class 1 or class 2 insulation
|
|
Luminaire porté en fonte d’aluminium
Protection : IP66
Isolation : classe 1 ou 2
Encombrement : 710 x 410 mm
Poids : 3,00 Kg
Puissance : 70 à 125 W
Surface projetée : 0,28 m2
Hauteur conseillée : 2,50 à 4,00 m
|
|
Champs elysée
Cast aluminum light pole
Height: 4,00 m
3 fixing sticks ø 24 x 410, distance between axes ø 470
|
|
Vendôme series
Cast iron light pole
Tall base : 3,60 m / 4,60 m / 5,07 m / 5,40 m / 6,04 m / 6,84 m
Short base : 2,78 m / 3,77 m / 4,24 m
4 fixing sticks ø 24 x 400, distance between axes 500 x 500
Base models: 2,50 m / 3,50 m / 3,97 m / 4,20 m
4 fixing sticks ø 16 x 200, distance between axes 260 x 260
|
|
Lyre GM
Hanging or postmount moulded luminaire
Metal and finish: painted aluminum
Protection: IP 66 - Class 1 or 2 insulation
Wattage: 100 à 250 W
Suggested mounting height: 5,00 to 8,00 m
Postmount Lyre GM
Size: 1530 x 840 mm
Weight: 25 Kg
Hanging Lyre GM
Size: 1210 x 840 mm
Weight: 20 Kg
|
|
Edera luminaire
Postmount painted cast aluminum luminaire
Protection: IP 66 - Class 2 insulation
Size: 690 x 435 mm
Weight: 7,50 Kg
Wattage: 70 to 150 W
Windage area: 0,354 m2
Suggested mounting height: 3,50 to 5,00 m
PPMA diffuser
|
|
Postmount luminaire
Metal and finish: painted cast aluminum
Protection: IP 66
Class 1 or class 2 insulation
Size: 750 x 700 mm
Weight: 2,30 Kg
Wattage: 70 to 150 W
Windage area: 0,41 m2
Suggested mounting height: 3,00 to 6,00 m
|
|
PLACE is the new lighting system of the zones
public and residential. Post patented in
extruded aluminum, provided with 6 vertical rails on
which it is possible to insert spheres with
ravelled optics, fulfilling the antipollution requirements luminous, in all the positions on
post.
On the rails, thanks to the ad hoc accessories, it is possible to install components of nature
various, of the cameras, the standards, the control panels, baskets etc
An esthetic completion with the base plate of the post was creates out of aluminum.
An special attention was paid to the speed and the facility of the wiring of the spheres in a simple way
and rapid without boring the poteau.¬ "
|
|
Low Visual Signature Luminaire
WARP9 is a new concept in luminaire design - visual stealth.Typical site lighting attempts to embellish, decorate, or adorn, often beyond the original architectural intent. WARP9 was conceived and developed with an entirely different directive. WARP9 was designed to disappear from the site, camouflage itself within its surroundings, and avoid detection from daytime visual perception. WARP9 is the antithesis of massive, showy, recognizable, and ornamental design, allowing architecture to remain visually dominant as it was originally intended. WARP9 is a concept that is long overdue, yet one that is light years ahead of its time.
|
|
|
The bold new look of the AC Series is a creation inspired by form and function, molded by its aesthetic relationship to the architectural site. With its distinguishing "backbone" that structurally ties its post-top or side-arm mounting to the pole, AC employs a soft curvilinear form that reduces wind loading and visual mass when compared to bulky square fixtures. The sweeping curves are created by the backbone which contains the ballast and electrical components, and the body reveals, which actually conform to the interior geometry of the optical systems. Every element of the AC design is functional, yet the overall appearance is one of aesthetic unity.
|
|
|
Post composed from two posts curves you cut conical in galvanized steel S275J to warmth, assembled between they to the center from a decorative element in sheet and top from a horizontal pipe with attack for the illuminant body to suspension. Supplied of hatches of closing for buttonholes to morsettiere and lives for grounding. Predisposition for implantation to masonry. Height milimeter 8110; shelf milimeter 2900.
|
|
|
|