|
|
| Products 91 to 120 of 186 |
Suitable poles: From 3 to 6 meters high poles.
Body: Injected aluminium . Microtextured black colour finished.
Diffuser: Thermically thoughened lenticular glass.
Fixing: Top fixing, Ø60mm exit.
Protection level: IP66 (optical block), IP44 (luminaire).
IK10
Electrical class: Class I. Class II available.
Gear tray: E27/E40
Electrical equipment: The lamp has enough space to keep electrical equipment with different powers according to the table below.
Upward flux ratio: 0,00%
|
|
Location: Recommended pole for residential and green areas, pedestrian and recreational zones, parks, squares and neighbourhoods.
Description: Troncoconical pole designed in one single piece consisting of two parts of different diameters of cylindrical column. Cylindrical pole joined to the column by means of a tight. Adaptable bracket of Ø60mm to fix the luminaire to the pole in horizontal position.
Material: 1.Galvanized Stylum: Base, shaft and brackets made of galvanized steel; black oxiron painted base and grey oxiron painted shaft (ICST60APP).
2.Stylum mixta: Galvanized steel base and black forge oxiron painted. Shaft and brackets made of stainless steel (ICST60MAPP).
Anchoring: M18 x 500mm embedded bolts (IA01).
|
|
Location: Recommended pole for residential and green areas, pedestrian and recreational zones, parks, squares and neighbourhoods.
Description: Telescopica pole designed in one single piece of 3600mm high. Rectangular base with rounded vertex of 1150mm high. Adaptable joint of 70mm and Ø60mm to fix the luminaire to the pole in vertical position.
Material: Made of zinc plated steel. Black oxiron heat-painted.
Anchoring: M18 x 500mm embedded bolts (IA01).
|
|
Suitable poles: From 3 to 6 meters high poles.
Body: Injected aluminium. RAL9007 silver grey colour finished.
Diffuser: Thermically toughened lenticular glass.
Fixing: Top fixing with Ø60mm coupling joint.
Protection level: IP66 (optical block), IP65 (luminaire).
IK10
Electrical class: Class I. Class II available.
Gear tray: E27/E40
Electrical equipment: The lamp has enough space to keep electrical equipment with different powers according to the table below.
Upward flux ratio: 0,0%
|
|
Suitable poles: from 3 to 4 meters high poles.
Dome: Made of aluminium
Diffuser: Policarbonate.
Deflection slats: Black aluminium on the outside and anodized on the inside.
Base: Made of aluminium, grey oxiron finish. Vertical fixing on Ø60mm pole by 3 ALLEN M10 screws.
Protection level: IP44 (luminaire).
IK06
Electrical class: Class I. Class II available.
Gear tray: E27/E40
Electrical equipment: The lamp has enough space to keep electrical equipment with different powers according to the table below.
Upward flux ratio: 5,2%
|
|
|
STANDARD COLUMN Consisting of a base, a closed module, a semi-closed module, six open modules and a lamp holder in GG-20 pearlitic cast iron, with a height of 9550 mm. 12 anchorage bolts in M-24 zinc-coated steel, 1000 mm in length. VENTILATION GRID Upon request, one of the modules can be fitted with a ventilation grid made out of steel plate, protected with a rust-proof coating (dichromated). TRAP DOOR COVER Made out of hot-galvanised steel plate. HAT The lamp holder is crowned with a polyester hat reinforced with fibre glass. DIFFUSOR: Diffusor in 4 mm thick methacrylate, reinforced at the two ends, 600 mm in diameter and 1000 mm in length. NUTS AND BOLTS In A4 stainless steel.
|
|
|
COLUMN: Cylindrical, heights of 10, 12 and 14 m, 220 mm in diameter, in ST-52 grade steel. Fuse box lid with triangular theft-proof lock. BRACKET: It is available with 1,2, 3 or 4 arms, including wall anchorage bracket. Made out of ST-52 grade steel. Height: 3 m. LAMP FITTING: Made by SILL with cast aluminium casing. BANNER SUPPORT: Solid stainless steel bar and parts with rounded ends. NUTS AND BOLTS: In stainless steel. FOUNDATION: Metal plate with anchorage bolts on 1.5 x 1.5 x 1.5 m concrete footing.
|
|
|
|
|
|
Futura: design and efficiency
Designed by Pietro Palladino, the luminaire is characterized by a dynamic shape that makes it particularly suitable for street lighting. IP66 + IP44 protection level, non-polluting louvre, extremely efficient.
Supplied with rotating connector that enables various inclined positions for 100 to 400 W SAP and 150 W CDO lamps.
Available in the:
- dual power version for remote-controlled systems, UMPI, complete with "receiver" (sub-code 0083)
- dual power version with pilot wire control (sub-code 30)
- head for electronic ballast Dibawatt Type
Positioning:
- high performance product for market regulations
Futura: Remote-controlled/dual power
- DUAL POWER VERSION: The system is an excellent way of saving energy at night.
The use of "DUAL POWER" accounts for:
- reduced power absorption by 40/45% when running on reduced power;
- reduced servicing, higher average working life of lamps;
- The "DUAL POWER SYSTEM" uses a double speed reactor, with reduced flow and less power absorbed;
- An electronic switching device allows switching from full power to reduced power;
- A magnetic ballast-operated "DUAL POWER SYSTEM" cannot be used in connection with metal halide lamps. Lamp ignition/re-ignition is also recommended with the use of nominal power.
|
|
|
|
|
|
Designed by Pietro Palladino, this road lighting fixture has a classic shape. Product performance is associated with the latest state-of-the-art technology.
Campana can be used to revamp urban lighting by improving efficiency, while saving energy. The luminaire blends in well with the old urban landscape.
Campana: advantages
Non-polluting louvre, suitable for suspension, pole or wall mounting.
Available with different optics, complies with the highest standards in terms of working life and resistance.
New accessories (pole and bracket) are currently in the pipeline.
Campana: centre-road installation
- 3135 Road lighting:
- non-polluting road light in 99.85 aluminium
- hinge opening
- knife switch
- flat tempered glass
- lamps :
- SAP 70-150-250W
- CDO 150 W
- dual power electric gear for sodium versions
- suspension accessory for ropes
Campana: urban lighting
- 3136- 3138 wide beam suspension lamp:
- wide beam suspension road light, non-polluting, in 99.85 aluminium
- hinge opening
- knife switch
- flat tempered glass
- for lamps :
- JM-E 150 W 3800 K
- HCI-T150 W 4200 K
- FLC 120 W 4000 K
- SAP-T150-250 W
- accessory for suspension or pole/wall mounting
Campana: versatility
- Captivating design, colour customisation
|
|
|
In 1992, Philippe Starck worked with JCDecaux to develop a revolutionary type of streetlight: vertical during the day, it pivoted down at nightfall to direct the beam of light onto the street.
|
|
Very general-purpose, mast IC Right adapts to lighting signal or offset like to any type of bracket lamp.
- Bracket lamp signal, simple or double offset
- Coating ACS Laminated without maintenance
|
|
|
SEL 44 Post creates symmetrical lighting. The lighting characteristics will depend on the choice of globe. The opal globe creates diffuse and even lighting and is equipped with an opal internal diffuser which ensures that the main component of the upward light is shaded off. The clear globe is equipped with an internal reflector to ensure a wide downward light distribution. The reflector is perforated at the bottom to permit uplight to illuminate the upper portion of the globe.
|
|
Materials and finishes Outdoor lighting and marking system. Extruded aluminium column, lacquered white or silver. Rotation-modeled polyethylene shade, translucent or lacquered white or silver. Electrical connections either in the column or in the base.
Lamps
Hal.27Max.150
IP 65
|
|
|
With a unique shape evoking the plant kingdom, both the structures and the glass are available in different colours. COROLLA is the ideal unit to distinguish large streets, commercial roads, parks, gardens and other urban environments, with a modern and elegant style. Available also as a wall fitting option, COROLLA offers the greatest of ease during installation and maintenance, with an accessible frame, even without tools, and a hinged opening to the empty lamp.
|
|
|
This functional and decorative luminaire with a neo-modern design can be adjusted - according to the model - to different heights and lengths.
|
|
"Tircis" is made of four parts :
THE BODY made in embossed aluminium insures the reflector's protection.
THE BOWL in clear methacrylate or polycarbonate (on request) is joint
to the frame by mean of 4, 1/4 turns.
Four types of bowl : spherical, half of spherical, flat or ogival.
THE REFLECTOR in pure aluminium, stamped out in one piece, anodised.
The socket is fixed on a regulation system for the focalisation of the
lamp.
Access to control gear is very easy by swinging of the reflector.
Silicon gasket.
|
|
|
This multi-reflecting indirect luminaire has an aesthetic line and is suitable for different types of situations.
|
|
|
Traditional luminaire with a six-face bended dome suitable for standard and contemporary sites.
|
|
"Tircis" is made of four parts :
THE BODY made in embossed aluminium insures the reflector's protection.
THE BOWL in clear methacrylate or polycarbonate (on request) is joint
to the frame by mean of 4, 1/4 turns.
Four types of bowl : spherical, half of spherical, flat or ogival.
THE REFLECTOR in pure aluminium, stamped out in one piece, anodised.
The socket is fixed on a regulation system for the focalisation of the
lamp.
Access to control gear is very easy by swinging of the reflector.
Silicon gasket.
|
|
|
Both traditional and prestigious luminaire whose harmonious lines give a decorative and artistic steel.
|
|
Historical luminaires from se’lux enhance the areas around groups of old buildings and can lend entire sections of a town a touch of splendour. The design and ornamental decoration that these luminaires feature supports the quality and harmony of the urban environment – their form and style are a subtle reference to their surroundings. In historical architecture, the reference would be the columns and the rhythm of the vertical and horizontal decorative elements on the façade. Our historical luminaires
comprise state-of-the-art lighting technology. They are energy-efficient, have an extremely long service life and are maintenance-friendly. Beautifully designed to light the way after dark and enhance our towns and cities during daylight hours.
|
|
Lighting column that can be made In of small or large height.
|
|
Urbapole
The Urbapole lighting column enjoys simple timeless lines which impart a sense of character and place to a wide variety of streetscapes.
|
|
Die cast aluminium lighting column
|
|
|
The luminance Series can be mounted as a Post Top or fitted to be a suitable wall bracket for use in the urban space.
|
|
Composite
Day or night, Composites reveals an imaginative link to the urban layout by adding decorative effects to the functional lighting.
|
|
Roussane
This modular bracket affirms an elegant smoothness by working the extruded aluminium profile.
|
|
|
lighting system for outdoor applications with protection degree IP55 in stainless steel with bronze finish, 4500mm from the ground. it is provided with inspectable terminal board to which various accessories may be fitted, such as rubbish bins and wooden seats. the light fixture can be installed at 4500mm or 3860mm from ground. the two fixtures can accomadate fluorescent or metal halide kits, either symmetrical or asymmetrical. available also the version bollard, with ground plate included and 1W white led with power pack included to create an accent light.
|
|
ewo is a partner in the development of integral and technically matured light solutions: we offer full competend light consulting, innovation in
technical light solutions and individual styling
Material
· Steel pole hot-dip galvanized ø193mm
· substructure secondary reflector high-grade steel
· Covering secondary reflector in aluminium
· Synthetic facets alu steamed and sealed
· Screws in high-grade steel
· Surface polyester powder coated
|
|
Material
- Housing in aluminium
- Opal illuminant covering [PMMA]
- Fasteners in high-grade steel
- Steel pole hot-dip galvanized
- Screws in high-grade steel
- Surface polyester powder coated
- Colour anthracite [DB703] %u2013 other RAL colours on request
|
|
|
|
Urban lighting: lamp posts
