|
|
In the picture:
HOPPE Rosetten set from aluminum for internal doors suppliers, series of Vitória, aluminum nature (F1)
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
In the picture:
HOPPE Rosetten set from aluminum for internal doors supplier, series of Melbourne, aluminum nature matt (F1-2)
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
In the picture:
HOPPE Rosetten set from aluminum for internal doors furniture, series Stockholm, aluminum nature (F1)
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
In the picture:
HOPPE Rosetten set from aluminum for internal doors manufacturers, series Marseille, aluminum steel (F9).
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
COLLECTION OF LIGHT ALUMINIUM ALLOY HANDLES FOR CONTEMPORARY WINDOWS AND DOORS SUPPLIERS
Collections is a range of handles for windows and doors featuring a cutting-edge modern design, mostly made of aluminium.
Indeed, it is this combination of aluminium and design that gives this particular range a distinctive and unique bonus.
Owing to its qualities of being lightweight, resistant, versatile in terms of industrial processing, to the lack of adverse effects on the human organism and its high recyclability at low costs and therefore with the least environmental impact, aluminium can today be considered to be one of the main players amid modern metals and its use, at the hands of important contemporary designers, makes the Collections range truly unique in the handles industry.
|
|
HORUS double handle
Door handle furniture in die-cast aluminium with return spring, and screw covering base with release positioning. Handle and base element in die-cast aluminium, rotation bush in nylon, springs and washers in stainless steel. Equipped with a 8 mm squared spindle in galvanized steel. |
|
| There's no shortage of wedge- shaped lever handles around. Virtually every maker features a variation on this theme in their repertoire. This design design may originally have been Professor Burchartz's. The version by Johannes Potente is very slender. |
|
| Looking at this lever handle design, it could be argued tongue-in-cheek that Philippe Starck was seeking to consign our entire sector to the bullring. Strangely enough, however, when the horns are fastened to their backplates they mutate into design door handles as fit for function as any you could wish for:Matt silver colour backplate, mirror-finish handle. Both in premium-quality aluminium. |
|
In the autumn of 1996, Düsseldorf-based interior designer Heike Falkenberg asked FSB to recreate an old handle design furniture for a renovation job
she was involved in. Using the sketch she submitted, FSB's Development unit cut a demonstration model out of the FSB 1076 handle.The prototype looked so good that, together with the designer, we spontaneously decided to market our gripping idea. The design was rapturously received in the marketplace. |
|
Flora is the new two-handed double handle in die-cast aluminium which sets a new standard for doors manufacturers.
In addition to being a reliable and extremely economical handle, Flora is characterised by its appealing design design, which integrates perfectly with aluminium profiles.
With a reliability and strenght that make it ideal for heavy duty applications, Flora is also simple to install thanks to the spring-action screw cover base.
The Flora handle is protected and finished using the Giesse painting system, which is characterised by high-quality surfaces, even colouring and excellent scratch-proof properties.
The components are pretreated to guarantee resistance to durface scaling and subcorrosion. |
|
Two production units, one using advanced technology, deal with the entire manufacturing process, trom moulding to polishing, painting, the assembly ot the various component parts and finishing.All this takes place in an area Ihal ensures the protection of the workers and the environment using one of the first water and air purification plants to be installed in the at. The final quality control i the products are carried out carefully and meticulously, with a view to guaranteeing the excellent quality levels that Pamar insists on.
|
|
Two production units, one using advanced technology, deal with the entire manufacturing process, trom moulding to polishing, painting, the assembly ot the various component parts and finishing.All this takes place in an area Ihal ensures the protection of the workers and the environment using one of the first water and air purification plants to be installed in the at. The final quality control i the products are carried out carefully and meticulously, with a view to guaranteeing the excellent quality levels that Pamar insists on.
|
|
Two production units, one using advanced technology, deal with the entire manufacturing process, trom moulding to polishing, painting, the assembly ot the various component parts and finishing.All this takes place in an area Ihal ensures the protection of the workers and the environment using one of the first water and air purification plants to be installed in the at. The final quality control i the products are carried out carefully and meticulously, with a view to guaranteeing the excellent quality levels that Pamar insists on.
|
|
Door furniture
While door furniture is the key decorative element of any door, it also contributes significantly to its modern security, and Vachette has mastered that challenge by combining both criteria at the highest level. As proof of this commitment Vachette has developed two models of door furniture corresponding to the A2P* and A2P** labels and featuring a modern modern design. The Vachette product offer also includes a wide range of door furniture with an anodised aluminium or bright chrome finish.
|
|
In the picture:
HOPPE window handle from aluminum, series Stockholm, aluminum nature (F1).
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors manufacturers and windows furniture. |
|
COLLECTION OF LIGHT ALUMINIUM ALLOY HANDLES FOR MODERN WINDOWS AND DOORS FURNITURE
Collections is a range of handles for windows and doors featuring a cutting-edge modern design, mostly made of aluminium.
Indeed, it is this combination of aluminium and design that gives this particular range a distinctive and unique bonus.
Owing to its qualities of being lightweight, resistant, versatile in terms of industrial processing, to the lack of adverse effects on the human organism and its high recyclability at low costs and therefore with the least environmental impact, aluminium can today be considered to be one of the main players amid modern metals and its use, at the hands of important contemporary designers, makes the Collections range truly unique in the handles industry.
|
|
YOUNG COW offers the advantage of complete ranges which make it possible to carry out, through the same line, all the decoration of a building site: trimming of building doors on plates or rivet washers, handles of windows furniture, casement bolts, guards-coprs and handrails furniture, profiles of decoration and protection of walls, anti-grip fingers, plinths, edge of steps, stops of fitteds building carpet, butted of ground and wall, tubular handles, carry-clothing, small latches...
The progress of architecture passes by the renewal of the styles and the forms. Thus Vachette remains it permanently with the listening of the tendencies and the needs in order to develop, with designers of reputation, innovating products.
Young cow building posts a constant will to innovate with a research of quality and reliability intended to meet the needs for safety and comfort of the end user. |
|
The Panama Bar, is featured by up to date and notable design. The smooth shapes do however leave the certainty of a reliable and safe furniture product.
The panic bolt has been certified by the ICIM authorities in compliance with the UNI EN 1125 standards and is therefore CE approved.
The Panama Bar has been designed using the same mechanisms of the Panama Push Bar range, thus guaranteeing optimal solutions to a number of warehouse handling problems.
The Panama Bar is applicable on aluminium, wooden, PVCu and steel doors with the greatest versatility of use (it can be horizontally installed one point locking, or vertically two or three point locking).
The absolute quality of the inner mechanisms, as well as the very high standard finishes, do grant unique long life to the device. |
|
Aluminium finger catch
Body, receiving element and handle in either anodized or painted aluminium. Series of adjustment shims in black nylon. Fastening screws in galvanized steel.
|
|
Panic exit devices
Security standards for fire and evacuation emergencies have become ever stricter - to safeguard the public's safety in public areas. To comply with these security requirements, Vachette has developed a full range of "anti-panic locks furniture" suitable for any premises used by the public.
|
|
Patented- permanent Security
- Self adhesive and articulated
- It stops the door furniture from shutting completely to protect children's fingers. Stick it on door frame 5*9" from the floor.
- A simple movement by an adult allows the door to shut completely while leaving the block door in place. The next time the door is opened the device repositions itself to prevent slamming.
- White - size 3"x2" approx - 20 sec to install, no damage, discrete and unobtrusive.
- Unlike other system, you have it permanently fixed to ensure complete safety at all times.
- Tough and trustworthy, made from the same high-tech materials as STOP FINGERS. |
|
In the picture:
HOPPE Rosetten set made of brass for internal doors suppliers, series of Monte Carlo (by Giguiaro Design), brass brass colors polishes/satiniert-Resista®* (F74-R).
Corresponds to the requirements according to DIN EN 1906.
*HOPPE-Beschläge with Resista® have 10 years warranty on the surface.
This model is available in other surfaces and for further ranges of application with doors and design windows. |
|
In the picture:
HOPPE window furniture handle from brass, series mountains, brass chromium plating/aluminum steel (F49/F9).
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors manufacturers. |
|
In the picture:
HOPPE Rosetten set made of brass for internal doors supplier, series of Atlanta, brass polishes (F71).
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
In the picture:
HOPPE Rosetten set made of brass for internal doors supplier, series of Bruxelles, brass polishes/matt (F71/F72).
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
In the picture:
HOPPE Rosetten set made of brass for internal doors furniture, series of Vitória, brass burnishes (F73).
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
In the picture:
HOPPE Rosetten set made of brass for internal doors suppliers, series of Athinai, brass chromium plating/matt chromium plating (F49/F98).
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
In the picture:
HOPPE Rosetten set made of brass for internal doors furniture, series of Genova, brass brass colors polishes/satiniert-Resista®* (F75-R).
Corresponds to the requirements according to DIN EN 1906.
*HOPPE-Beschläge with Resista® have 10 years warranty on the surface.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
In the picture:
HOPPE Rosetten set made of brass for internal doors furniture, series of Capri, brass polishes/matt chromium plating (F71/F49).
Corresponds to the requirements according to DIN EN 1906.
This model is available in other surfaces and for further ranges of application with doors and windows furniture. |
|
|
|
Hardware for doors and windows
