security bollard / parking prevention / steel / galvanized steel
059 ABES Public Design S.à r.l.

{{requestButtons}}

Characteristics

  • Type:

    security, parking prevention

  • Material:

    steel, galvanized steel

  • Features:

    removable

  • Other characteristics:

    high, high-resistance, for parking lots

Description

ABES Bollard 059 is a square bollard made from flat steel with two open sides, a horizontal divider in the middle, and a solid base.

Mounting
Removable with 3p-Technology, comprising a 300 mm ground shell, junction piece with predetermined breaking point (without anti-roll device), 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard.
Alternative: concrete embedment.

Finish
– Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703
– Accessories and special requirements such as different colours, red and white paint, reflective film or powder coating of chains, rings, shackles, etc. in the same colour as the bollard are available on request at a surcharge.
– The height can be adjusted individually

The basic package for ABES Bollard 059 with 3p-Technology contains:
– The bollard, hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703.
– Measurements (H above the ground x Ø in mm): 900 x 80/80.
– Ground shell 300 mm (000.001), cast iron, galvanised.
– Junction piece (000.008), cast iron, galvanised.
– Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004).
– Ground rosette (Completely covers the ground shell)

Order Information
Art. N° 059.020 (3p-Technology)
Art. N° 059.001 (fixed mounting)
Art. N° 059.120 (3p-Technology, powder coated)
Art. N° 059.101 (fixed mounting, powder coated)

Other ABES Public Design S.à r.l. products

BOLLARDS & BARRIERS